GOST R 51686.2-2000
ГОСТ Р 51686.2-2000
|
|
Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors. Part 2. Particular requirements for conductors from 35 up to 300 sq mm
Соединительные устройства. Требования безопасности к контактным зажимам. Часть 2. Дополнительные требования к винтовым и безвинтовым контактным зажимам для соединения медных проводников с номинальным сечением от 35 до 300 мм2
Status: Not effective - Canceled. Information about the registration of 858-st dated November 15, 2012 (the official website of Rosstandart); IUS 10-2013
The standard applies to screw and screwless contact clamps of connecting devices of both individual products and those built into equipment intended for connecting copper unprepared conductors (in accordance with IEC 228 [1]) of rigid (single and multicore)
Стандарт распространяется на винтовые и безвинтовые контактные зажимы соединительных устройств как отдельных изделий, так и встроенных в оборудование, предназначенные для присоединения медных неподготовленных проводников (в соответствии с МЭК 228 [1]) жестких (одно- и многожильных) и/или гибких с номинальным сечением от 35 до 300 мм2 включительно и эквивалентных проводников AWG на номинальное переменное напряжение до 1000 В номинальной частоты до 1000 Гц и постоянное напряжение до 1500 В. Стандарт распространяется на зажимы с гибкими проводниками номинального сечения 35 мм2. Стандарт не распространяется на зажимы для присоединения: - методом обжатия жил проводников или их пайки; - неуниверсальных, указанных в 10.2.2 ГОСТ Р 51686.1.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
12/18/2000
SKU: RUSS59431
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.20 Connecting devices »
National standards »
29 ELECTRICAL ENGINEERING »
29.120 Electrical fittings »
29.120.20 Connecting devices »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E7 Electrical apparatus and fittings »
E71 Devices with voltage up to 1000 V »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Apparatus for the distribution of electrical energy (except for automatic switches) »
The Document References:
GOST 8724-2002: Basic norms of interchangeability. Metric screw threads. General plan
GOST 8724-81: Basic norms of interchangeability. Metric screw thread. Diameters and pitches
GOST R 50043.1-92: Connecting devices for low voltage circuits for household and similar purposes. Part 1. General requirements
GOST R 50043.2-92: Connecting devices for low voltage circuits for household and similar purposes. Part 2-1. Particular requirements for connecting devices as separate entities with screw-type clamping units
GOST R 50043.3-2000: Connecting devices for low voltage circuits for household and similar purposes. Part 2-2. Particular requirements for connecting devices as separate entities with screwless-type clamping units
GOST R 51686.1-2000: Connecting devices. Electrical copper conductors. Safety requirements for screw-type and screwless-type clamping units. Part 1. General requirements and particular requirements for clamping units for conductors from 0,2 up to 35 sq. mm (included)
GOST R IEC 998-2-4-96: Connecting devices for low-voltage circuits for household and similar purposes. Particular requirements for twist-on connecting devices
The Document is Referenced By:
GOST R 51324.1-2012: Switches for household and similar fixed electrical installations. Part 1. General requirements
GOST R 51324.2.4-2012: Switches for household and similar fixed electrical installations. Part 2-4. Particular requirements for isolating switches
GOST R 51992-2002: Surge protective devices connected to low-voltage power distribution systems. Part 1. Performance requirements and testing methods
GOST R 51992-2011: Low-voltage surge protective devices. Part 1. Surge protective devices connected to low-voltage power distribution systems. Technical requirements and test methods
GOST R IEC 60065-2002: Audio-, video- and similar electronic apparatus. Safety requirements
GOST R IEC 62196-1-2013: Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Unified system for design documentation. Types and sets of design documentation
Language: English |
Loads and impacts
Language: English |
High strength rolled steel. General specification
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
