GOST R 53791-2010
ГОСТ Р 53791-2010
|
|
Resources saving. Stages of technological cycle. General principles
Ресурсосбережение. Стадии жизненного цикла изделий производственно-технического назначения. Общие положения
Status: Effective - Introduced for the first time
This standard applies to national economic products for industrial and technical purposes, and establishes the basic provisions and the procedure for establishing requirements for resource saving in SSTP. This standard is intended for use in the development of new and / or upgraded products. The requirements of this standard are provided by the customer (main consumer), the developer and the manufacturer when creating and mastering products.
Настоящий стандарт распространяется на народно-хозяйственные изделия производственно-технического назначения и устанавливает основные положения и порядок установления требований по ресурсосбережению на СЖЦП. Настоящий стандарт предназначен для применения при разработке новой и/или модернизированной продукции. Требования настоящего стандарта обеспечиваются заказчиком (основным потребителем), разработчиком и изготовителем при создании и освоении продукции
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
5/31/2010
SKU: RUSS59606
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
01 General. Terminology. Standardization. Documentation »
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
PromExpert »
SECTION V. ENVIRONMENTAL PROTECTION. NATURE USE »
II Ensuring environmental safety »
3 Hazardous Waste Management »
3.3 Requirements for waste management in implementation of activities »
3.3.2 Requirements for waste producers in carrying out waste management activities »
3.3.2.5 Requirements for processing, processing and storage of secondary material resources »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.030 Waste »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.030 Waste »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.030 Waste »
13.030.01 Waste in general »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.030 Waste »
13.030.01 Waste in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T51 Documentation system that determines indicators of quality, reliability and durability of products »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T0 General technical and metrological terms, designations and values »
T00 General technical terms, symbols and quantities »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Product quality indicators system (SPKP). Standards that determine the indicators of reliability and durability of products »
The Document is Replaced With:
GOST R 53791-2023: Resource saving. Life cycle stages of production and technical products. General provisions
The Document References:
Federal Law 162-FZ: About standardization in the Russian Federation
GOST 12.0.003-2015: Occupational safety standard system. Dangerous and harmful production effects. Classification
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 14.201-83: Provision of technological efficiency of products design. General requirements
GOST 14.322-83: Rate setting expenditure for materials. Basic rules
GOST 2.124-2014: Unified system for design documentation. Procedure for use of over-the-counter goods.
GOST 2.601-2013: Unified system for design documentation. Exploitative documents
GOST 2.608-78: Unified system for design documentation. Order of listing of data for precious materials in operational documentation
GOST 25346-2013: Basic norms of interchangeability. Geometrical product specifications. Code system for tolerances on linear sizes. General provisions, tolerances, deviations and fits
GOST 25347-2013: Basic norms of interchangeability. Geometrical product specifications. System for tolerances on linear sizes. Series of tolerances, limit deviations for holes and shafts
GOST 3.1603-91: Unified system for technological documentation. Rules of making documents on technological processes (operations) of collection and delivery of technological waste
GOST 30167-2014: Resources saving. Procedure for resource conservation indices establishment in the papers on goods
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 17.0.0.06-2000: Nature protection. Enterprise ecological certificate. Fundamental regulations. Typical forms
GOST R 51768-2001: Resources saving. Waste treatment. Methods for determination of mercury in mercury containing waste. General requirements
GOST R 51769-2001: Resources saving. Waste Treatment. Documentation and regulation of dealing with production and consumption waste treating. Basic principles
GOST R 52104-2003: Resources saving. Terms and definitions
GOST R 52106-2003: Resources saving. General
GOST R 52107-2003: Resources saving. Classification and definition of indices
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 53691-2009: Resources saving. Waste treatment. Certificate of waste I-IV classes of hazard. Basic requirement
GOST R 53692-2009: Resources saving. Waste treatment. Stages of technological cycle of waste
MR 186-85: Ensuring the manufacturability of the design of engineering and instrumentation products
RD 50-657-88: Instructions. Materials and precious metals. Rationing procedure
The Document is Referenced By:
GOST R 15.000-2016: System of product development and launching into manufacture. Basic provisions
GOST R 51769-2001: Resources saving. Waste Treatment. Documentation and regulation of dealing with production and consumption waste treating. Basic principles
GOST R 52106-2003: Resources saving. General
GOST R 52107-2003: Resources saving. Classification and definition of indices
GOST R 52108-2003: Resources saving. Waste treatment. Basic principles
GOST R 53692-2009: Resources saving. Waste treatment. Stages of technological cycle of waste
GOST R 54529-2011: Resources saving. Packaging and environment. Terminology
GOST R 55103-2012: Resource saving. Efficient control of resources. Basic regulation
GOST R 55828-2013: Resources saving. Best available techniques for the management of waste lead-acid batteries
GOST R 55830-2013: Resources saving. Best available techniques for applying the waste hierarchy
GOST R 55833-2013: Resources saving. Requirements to documentation by production of products. Policy of rational using and ecology of materials
GOST R 56615-2015: Resources saving. Indices of materials consumption and materials affection. Guidance by establishment criterions of choice
GOST R 56847-2015: Pulp making processes. Waste norms
GOST R 58045-2017: Aircraft equipment. Risk management for quality assurance through life cycle stages. Risk assessment methods and acceptability criteria
GOST R 58050-2017: Aircraft equipment. Risk management for quality assurance through life cycle stages. Areas of uncertainty classification
GOST R 8.825-2013: State system for ensuring the uniformity of measurements. Intelligent Sensors and Intelligent Measuring Systems. Methods of accelerated tests
ITS 46-2019: Reducing emissions of pollutants, discharges of pollutants during storage and warehousing of goods (goods)
ITS 8-2015: Wastewater treatment in the production of products (goods), work and services at large enterprises
PNST 248-2017: On-board cryogenic tanks for locomotives on liquefied natural gas. General specifications
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.