GOST R 55224-2012
ГОСТ Р 55224-2012
|
|
Cements for the transport construction. Specifications
Цементы для транспортного строительства. Технические условия
Status: Effective - Introduced for the first time. IUS 1-2014
This standard applies to cements made on the basis of Portland cement clinker of a normalized composition and used in transport construction for the manufacture of concrete road and airfield pavements, bridge structures, concrete products, including sleepers, power lines, curbstones, etc., as well as for concrete road foundations and soil reinforcement, for which special requirements for the mineralogical composition of clinker are not imposed (hereinafter - cements), and by setting The requirements for cements and their material composition components. The requirements of this standard are allowed to be used in the design and manufacture of other concrete products and structures, if this does not contradict the current regulatory documents for these products and structures (standards, sets of rules, etc.)
Настоящий стандарт распространяется на цементы, изготавливаемые на основе портландцементного клинкера нормированного состава и применяемые в транспортном строительстве для изготовления бетонов дорожных и аэродро��ных покрытий, мостовых конструкций, железобетонных изделий, в том числе железобетонных труб, шпал, опор линий электропередач, бордюрного камня и др., а также для бетона дорожных оснований и укрепления грунтов, для которых специальные требования к минералогическому составу клинкера не предъявляются (далее - цементы), и устанавливает требования к цементам и компонентам их вещественного состава. Требования настоящего стандарта допускается использовать при проектировании и изготовлении других железобетонных изделий и конструкций, если это не противоречит действующим нормативным документам на эти изделия и конструкции (стандартам, сводам правил и др.)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/27/2012
SKU: RUSS59751
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
k.61 Mineral binders »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.10 Cement. Gypsum. Lime. Building mixture »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh12 Cementing materials »
The Document is Replaced With:
GOST R 55224-2020: Cements for transport construction. Specifications
The Document References:
GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30515-97: Cements General specifications
GOST 30744-2001: Cements. Methods of testing with using polyfraction standard sand
GOST 310.4-81: Cements. Methods of tests of bending and compression strengths
GOST 310.6-85: Cements. Method of water separation determination
GOST 31108-2003: General structural Portland clinker cements. Specifications
GOST 31108-2016: General structural Portland clinker cements. Specifications
GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements
GOST 4013-82: Gypsum and gypsum-anhydrite rock for the manufacture of binders. Specifications
GOST 5382-91: Cements and materials for cement production. Chemical analysis methods
GOST ISO 9001-2011: Quality management systems. Requirements
GOST R 51795-2001: Cements. Methods for determination of content of mineral additives
The Document is Referenced By:
GOST 17608-2017: The concrete paving slabs. Specifications
GOST 22266-2013: Sulphate-resistant cements. Specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST R 56600-2015: Reinforced concrete prestressed slabs for pavements of roads. Specifications
GOST R 56727-2015: Self-stressing cements. Specifications
GOST R 58323-2018: Reinforced concrete pipes for trenchless laying of engineering networks. Technical conditions
GOST R 58818-2020: Automobile roads with low traffic intensity. Design, construction and calculation
Letter 2939-OG/03: About the presence of a typo in GOST 26633-2015
ODM 218.3.039-2014: Recommendations for testing film-forming materials for the care of freshly laid concrete
ODM 218.3.070-2016: Guidelines on formulation of self-compacting concrete with prescribed waterproof properties for bored piles
ODM 218.3.084-2020: Recommendations for the preparation and use of organic-mineral mixtures in the construction of structural layers of road pavements of capital and lightweight types
ODM 218.3.095-2017: Corrosion protection of concrete and reinforced concrete structures of transport facilities
PNST 306-2018: Automobile roads of general use. Organo-mineral cold mixes with addition of recycled asphalt concrete pavement (RAP). Specifications
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.