GOST R 8.594-2002
ГОСТ Р 8.594-2002
|
|
State system for ensuring the uniformity of measurements. The metrological ensuring of radiation control. General principles
Государственная система обеспечения единства измерений. Метрологическое обеспечение радиационного контроля. Основные положения
Status: Not effective - Canceled. Registration information 138-st dated 03/13/2014 (Rosstandart official website)
This standard establishes the main provisions and rules for metrological assurance of radiation measurements performed for a monitored object in order to monitor the status and change of the radiation environment and monitor compliance with the requirements of established standards. This standard is used in the development of regulatory documents in the field of radiation monitoring (RK) in terms of the establishment of controlled values, measuring instruments (SI) and measurement procedures, as well as in the organization of metrological service of MI and RK procedures
Настоящий стандарт устанавливает основные положения и правила метрологического обеспечения радиационных измерений, выполняемых для контролируемого объекта с целью наблюдения за состоянием и изменением радиационной обстановки и контроля выполнения требований установленных норм. Настоящий стандарт применяют при разработке нормативных документов в области радиационного контроля (РК) в части установления контролируемых величин, средств измерений (СИ) и методик выполнения измерений, а также при организации метрологического обслуживания СИ и процедур РК
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
8/13/2002
SKU: RUSS59796
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
I Organizational and technical bases of metrological support »
1 Organization and management of metrological support »
1.1 Basic provisions of metrological support »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T80 Rules, norms, regulations infield of ensuring uniformity of measurements »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
State system for ensuring the uniformity of measurements (GSI) »
The Document References:
GOST 27451-87: Ionizing radiation measurement instruments
GOST 8.417-81: State system of ensuring the uniformity of measurements. Units of physical quantities
GOST R 8.563-96: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R ISO/IEC 17025-2000: General requirements for the competence of testing and calibration laboratories
MI 2427-97: Measurements Assessment of Status of Measurements in Test and Measurement Laboratories
MI 2453-2000: GSE. Methods of radiation monitoring. General requirements
MI 2552-99: State system for ensuring uniformity of measurements. Application of the Measurement Uncertainty Guidelines
PR 50.2.006-94: Procedure for calibration of measurement equipment
PR 50.2.009-94: The testing and approval procedure for the measurement instrumentation
PR 50.2.030-2001: State system for ensuring uniformity of measurements. Accreditation system of radiation control laboratories (SARK). Main provisions
RD 50-454-84: Guidelines. Introduction and application of GOST 8.417-81 "GSI. Units of physical quantities" in the field of ionizing radiation
RMG 29-99: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
The Document is Referenced By:
GOST R 22.9.12-2014: Safety in emergencies. Technical means of radiation control. General technical requirements
GOST R 50325-2011: Medical products. Radiation sterilization. Dosimetric techniques
GOST R 53745-2009: Organic fertilizers. Method for determination of specific effective activity of natural radioactive nuclei
GOST R 54016-2010: Foodstuffs. Method for caesium Сs-137 content determination
GOST R 54017-2010: Foodstuffs. Method for strontium Sr-90 content determination
GOST R 54038-2010: Soils. Methods of Cs-137 determination
GOST R 54040-2010: Production of plant growing and forages. Method of 137 Cs determination
GOST R 8.565-2014: State system for ensuring the uniformity of measurements. Metrological ensuring of atomic power stations. General principles
MR 2.6.1.0064-12: Radiation monitoring of drinking water using radiochemical analysis methods
MU 2.2/2.6.1.20-04: Evaluation and classification of working conditions of staff when working with sources of ionizing radiation
MU 2.6.1.2153-06: Efficient estimation of people exposure by aerial way radioactive contamination of territory
MUK 2.6.5.044-2016: The total activity of alpha-emitting radionuclides in environmental objects. Track Measurement
MUK 4.1.034-17: Methods of measuring the mass concentration of ammonium perchlorate in the air of the working area by the photometric method
MUK 4.4.052-08: Measurement of ambient dose equivalent and ambient equivalent dose of gamma radiation using gamma radiation dosimeters DKG-02U Arbiter, DKG-01D Garant, DKG-03D Grach, MKS RM-1401K radiation monitoring in an emergency
RD 07-08-2007: Guidelines for verifying compliance with the basic rules for accounting and control of radioactive substances and radioactive waste in an organization
RD 52.18.786-2013: The basic territorial subsystem of radiation monitoring of Roshydromet. Ensuring uniformity of measurements. Main provisions
RDT 06-2011: General requirements for the competence of laboratories (centers) performing measurements for the purpose of monitoring the environment and its pollution
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
