GOST R 8.613-2013
ГОСТ Р 8.613-2013
|
|
State system for ensuring the uniformity of measurements. The procedures (methods) of measurements of structure and properties of water samples. General requirements to development
Государственная система обеспечения единства измерений. Методики (методы) измерений состава и свойств проб вод. Общие требования к разработке
Status: Effective - Supersedes. IUS 7-2014
This standard applies to newly developed and revised methods for measuring the composition and properties of natural, drinking, wastewater samples of a centralized drainage system (including water that has undergone mechanical, biological, chemical purification), hot water - a technique for quantitative chemical analysis of water samples and sets general requirements for their development, assessment of suitability, certification, implementation. This standard is used for ICHA water samples used in government regulation to ensure the uniformity of measurements. It is acceptable to use this standard outside of government regulation.
Настоящий стандарт распространяется на вновь разрабатываемые и пересматриваемые методики измерений состава и свойств проб природных, питьевых, сточных вод централизованной системы водоотведения (в том числе вод, прошедших механическую, биологическую, химическую очистку), горячей воды - методики количественного химического анализа проб вод и устанавливает общие требования к их разработке, оценке пригодности, аттестации, внедрению. Настоящий стандарт применяют для МКХА проб воды, используемых в сфере государственного регулирования обеспечения единства измерений. Допустимо применение настоящего стандарта вне сферы государственного регулирования
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
7/25/2013
SKU: RUSS59797
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
II Measurements »
5 Measurement of physicochemical composition and properties of substances »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
T86.5 Measurement of physico-chemical composition and properties of substances and materials »
As a Replacement Of:
GOST R 8.613-2005: State system for ensuring the uniformity of measurements. Procedures for quantitative chemical analysis of water samples. General requirements for development
The Document References:
Federal Law 416-FZ: About water supply and sanitation
Federal Law 73-FZ: On objects of cultural heritage (historical and cultural monuments) of the peoples of the Russian Federation
Federal Law 7-FZ: Environmental Protection
GOST 17.1.1.01-77: Nature protection. Hydrosphere. Utilization of water and water protection. Basic terms and definitions
GOST 19179-73: Hydrology of land. Terms and definitions
GOST 25151-82: Water-supply. Terms and definitions
GOST 27065-86: Water quality. Terms and definitions
GOST 27384-2002: Water. Rates of measurement error of characteristics of composition and properties
GOST 30813-2002: Water and water-preparation. Terms and definitions
GOST 31861-2012: Water. General requirements for sampling
GOST 34100.3-2017: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
GOST 8.315-97: Standard samples for composition and properties of substances and materials
GOST 8.417-2002: State system for ensuring the uniformity of measurements. Units of quantities
GOST ISO/IEC 17025-2009: General requirements for the competence of testing and calibration laboratories
GOST R 14.03-2005: Ecological management. Influence factors. Classification
GOST R 51592-2000: Water. General requirements for sampling
GOST R 54500.3-2011: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.568-2017: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R ISO 5725-1-2002: Accuracy (trueness and precision) of measurement methods and results. Part 1. General principles and definitions
GOST R ISO 5725-2-2002: Accuracy (trueness and precision) of measurement methods and results. Part 2. Basic method for the determination of repeatability and reproducibility of a standard measurement method
GOST R ISO 5725-3-2002: Accuracy (trueness and precision) of measurement methods and results. Part 3. Intermediate measures of the precision of a standard measurement method
GOST R ISO 5725-4-2002: Accuracy (trueness and precision) of measurement methods and results. Part 4. Basic methods for the determination of the trueness of a standard measurement method
GOST R ISO 5725-5-2002: Accuracy (trueness and precision) of measurement methods and results. Part 5. Alternative methods for the determination of the precision of a standard measurement method
GOST R ISO 5725-6-2002: Accuracy (trueness and precision) of measurement methods and results. Part 6. Use in practice of accuracy values
MI 2881-2004: Recommendation. GSE. Methods of quantitative chemical analysis. Procedures for testing the acceptability of analysis
Order 1815: The procedure for verification of measuring instruments, requirements for the verification mark and the content of the verification certificate
PMG 96-2009: State system for ensuring the uniformity of measurements. Results and characteristics of measurement quality
R 50.1.060-2006: Statistical methods. Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation
R 50.2.060-2008: State system for ensuring uniformity of measurements. The introduction of standardized methods of quantitative chemical analysis in the laboratory. Confirmation of compliance with the established requirements
RMG 60-2003: State system for ensuring the uniformity of measurements. Attested mixtures. General requirements for development
RMG 61-2010: State system for ensuring the uniformity of measurements. Indicators of precision and accuracy of the quantitative chemical analysis techniques. Methods for evaluation
RMG 76-2004: State system for ensuring the uniformity of measurements. Internal control of quantitative chemical analysis result's accuracy
SanPiN 2.1.4.1175-02: Hygienic requirements for water quality of centralized water supply. Sanitary protection of sources
SP 2.1.5.1059-01: Hygienic requirements for underground water protection against pollution
The Document is Referenced By:
ITS 22.1-2016: General principles of industrial environmental control and its metrological support
PND F 12.15.1-08: Guidelines for sampling for sewage analysis.
RD 52.18.617-2015: Organization and order of conducting the monitoring
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.