GOST R 8.741-2011
ГОСТ Р 8.741-2011
|
|
State system for ensuring the uniformity of measurements. Volume of natural gaz. General requirements for measurement procedure
Государственная система обеспечения единства измерений. Объем природного газа. Общие требования к методикам измерений
Status: Effective - Introduced for the first time. IUS 11-2013
This standard applies to methods of measuring the volume of natural gas that meets the requirements of GOST 5542, reduced to standard conditions according to GOST 2939 and establishes general requirements for methods of measuring the volume of natural gas. This standard is used in the development of methods for measuring the volume of gas transferred to consumers or transported through gas pipelines.
Настоящий стандарт распространяется на методики измерений объёма природного газа, соответствующего требованиям ГОСТ 5542, приведенного к стандартным условиям по ГОСТ 2939 и устанавливает общие требования к методикам измерений объема природного газа. Настоящий стандарт применяют при разработке методик измерений объема газа, передаваемого потребителям или транспортируемого по магистральным газопроводам
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/13/2011
SKU: RUSS59812
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
PromExpert »
SECTION II. METROLOGICAL »
II Measurements »
2 Measurement of mechanical quantities »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.020 Metrology and measurements in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T8 State measurement system »
T86 Measurement Techniques »
T86.3 Measurement of parameters of flow, consumption, level, volume of substances »
The Document is Replaced With:
GOST R 8.741-2019: State system for ensuring the uniformity of measurements. The volume of natural gas. General requirements for measurement procedures
The Document References:
GOST 12.0.004-2015: Occupational safety standards system. Organization of training for labor safety. General principles
GOST 15528-86: Instruments for measuring flow rate, volume or mass of flowing fluid and gas. Terms and definitions
GOST 2939-63: Gases. Conditions for the determination of volume
GOST 30319.1-2015: Natural gas. Methods of calculation of physical properties. General statements
GOST 30319.2-2015: Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
GOST 31369-2008: Natural gas. Calculation of calorific values, density, relative density and Wobbe index from composition
GOST 31370-2008: Natural gas. Sampling guidelines
GOST 31371.1-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 1. Guidelines for tailored analysis
GOST 31371.2-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 2. Measuring-system characteristics and statistics for processing of data
GOST 31371.3-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 3. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two packed columns
GOST 31371.4-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 4. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line measuring system using two columns
GOST 31371.5-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 5. Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory and on-line process application using three columns
GOST 31371.6-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 6. Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three capillary columns
GOST 31371.7-2008: Natural gas. Determination of composition with defined uncertainty by gas chromatography method. Part 7. Measurement procedure of the mole fraction of components
GOST 5542-2014: Natural fuel gases for commercial and domestic use. Specifications
GOST 8.586.5-2005: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements
GOST R 8.654-2015: State system for ensuring the uniformity of measurements. Requirements for software of measuring instruments. Main principles
GOST R 8.662-2009: State system for ensuring the uniformity of measurements. Natural gas. Gas phase thermodynamic properties. Methods of calculation for transmission and distribution applications on base of the AGA8 fundamental equation of state
MI 1317-2004: State system for ensuring uniformity of measurements. Results and characteristics of the measurement error. Forms of representation. Ways to use during testing of product samples and control over the parameters of product samples and control of their para
MI 1967-89: Recommendation. State system for ensuring uniformity of measurements. The choice of methods and measuring instruments in the development of measurement techniques. General provisions
MI 2174-91: Recommendation. State system for ensuring uniformity of measurements. Certification of algorithms and data processing programs for measurements. Main provisions
MI 2667-2011: Recommendation. State system for ensuring uniformity of measurements. Consumption and quantity of liquids and gases. Measurement techniques using averaging pressure tubes ANNUBAR DIAMOND II, ANNUBAR 285, ANNUBAR 485 and ANNUBAR 585. Basic provisions
MI 3082-2007: State system for ensuring uniformity of measurements. The choice of methods and means of measuring flow and the amount of consumed natural gas, depending on the operating conditions at metering stations Recommendations on the choice of working standards for their calibration
MI 3269-2010: Recommendation. State system for ensuring uniformity of measurements. Construction, presentation, design and content of documents on methods (methods) of measurement
PB 08-624-03: Safety Regulations for oil and gas industry
PB 12-529-03: Gas distribution and gas consumption system safety rules. Series 12. Revision 4.
RD 50-453-84: Procedural Guidelines for Error Characteristics of Measuring Devices Under Actual Operating Conditions. Calculation Methods
RMG 29-2013: State system for ensuring the uniformity of measurements. Metrology. Basic terms and definitions
RMG 62-2003: State system for ensuring the uniformity of measurements. Ensuring the effect of measurements by the control of technological processes. Estimation of the measuring error when the limited point of information
The Document is Referenced By:
GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General
GOST R 58095.0-2018: Gas distribution systems. Requirements for gas consumption networks. Part 0. General
GOST R 8.882-2015: State system for ensuring the uniformity of measurements. The volume of natural gas. Method of error calculations in measurements of natural gas volume at reference conditions. Basic principles
|
Customers Who Viewed This Item Also Viewed:
 |
Metals. Methods of tension test
Language: English |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
