GOST R 51394-99

ГОСТ Р 51394-99

Wrought stainless steel for surgical implants. Specifications

Прокат из коррозионно-стойкой стали для хирургических имплантатов. Технические условия

Status: Not effective - Canceled. Registration information 673-st dated 11/01/2012 (official site of Rosstandart)

The standard applies to rolled stainless steel, intended for the manufacture of surgical implants: - cold-rolled steel sheet with a thickness of 0.8-3.9 mm; - long products with a special surface finish (bars with a diameter of 4.0 - 6.0 mm).

Стандарт распространяется на прокат из коррозионностойкой стали, предназначенный для изготовления хирургических имплантатов: - листовой холоднокатаный прокат толщиной 0,8-3,9 мм; - сортовой прокат со специальной отделкой поверхности (прутки диаметром 4,0 - 6,0 мм).

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of Russia, 12/16/1999

SKU: RUSS60012

Price: $212.00




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.11 Equipment and instruments for medical industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 11 HEALTH » 11.040 Medical equipment » 11.040.40 Implants for surgery, prosthetics and orthoptics »

National standards » 11 HEALTH » 11.040 Medical equipment » 11.040.40 Implants for surgery, prosthetics and orthoptics »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V32 Rolled and shaped steel »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » High-grade stainless steel, nickel-containing »

National Standards for OKSTU » MEDICINES, CHEMICAL AND PHARMACEUTICAL PRODUCTS AND PRODUCTS FOR MEDICAL PURPOSES » Drugs acting on the central nervous system »


The Document References:

GOST 10446-80: Wire. Tensile test method

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 12345-88: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 12359-81: Steels carbon, alloyed and highalloyed. Methods for the determination of nitrogen

GOST 12359-99: Carbon, alloyed and high-alloyed steels. Methods for determination of nitrogen

GOST 14192-96: Cargo marking

GOST 14955-77: Quality round steel with a special surface finish

GOST 1497-84: Metals. Methods of tension test

GOST 166-89: Vernier callipers. Specifications

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 26877-91: Metal products

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6032-2003: Corrosion-resistant steels and alloys. Test methods of intercrystalline corrosion resistance

GOST 6032-89: Corrosion-resistant steels and alloys. Methods for determination of intercrystalline corrosion resistance

GOST 6507-90: Micrometers. Specifications

GOST 7502-89: Measuring metal tapes. Specifications

GOST 7502-98: Measuring metal tapes. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

Customers Who Viewed This Item Also Viewed:

Petroleum for oil-processing plants. Specifications
Language: English
Price: $18.00
Industrial gas burners. General technical requirements
Language: English
Price: $152.00
Electrical articles. General requirement for environment mechanical stability
Language: English
Price: $28.00
Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Power transformer on-load tap-changing devices. General specifications
Language: English
Price: $167.00
Conical pipe thread. Profile, basic dimensions and tolerances
Language: English
Price: $71.00
Glass and glass products. Visual faults. Terms and definitions
Language: English
Price: $158.00
Industrial gas burners. Test methods
Language: English
Price: $204.00
Glass and glass products. Inspection methods for geometric parameters and appearance
Language: English
Price: $110.00
Weldable deformed reinforcing rolled products of A500C and B500C classes for reinforcement of concrete constructions. Specifications
Language: English
Price: $112.00
Crude petroleum. General specifications
Language: English
Price: $58.00
Power transformers. Test methods of tap changing devices
Language: English
Price: $626.00
Unified system for design documentation. Stages of designing
Language: English
Price: $71.00
White sugar. Specifications
Language: English
Price: $279.00
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $215.00
Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
Language: English
Price: $1,639.74
Guidelines for the photometric determination of hydrogen sulfide in the air
Language: English
Price: $62.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!