GOST 29134-97
ГОСТ 29134-97
|
|
Industrial gas burners. Test methods
Горелки газовые промышленные. Методы испытаний
Status: Effective
This standard applies to gas industrial burners operating on gaseous fuels combusted with air or with an air mixture with recirculated flue gases, as well as to the gas portion of combined burners used in gas-fired installations. The standard does not apply to burners in which additional means are used to intensify the combustion process (electrical or acoustic energy, oxygen); radiation pipes; burners that produce combustion products that are used as a controlled atmosphere; infrared burners; burners, which are an integral part of gas-using equipment for domestic use and catering; burner open-hearth furnaces, bath regenerative glass furnaces; torches of torch installations for burning of waste gases. The standard is applied to all types of tests of these burners, incl. certification
Настоящий стандарт распространяется на газовые промышленные горелки, работающие на газообразном топливе, сжигаемом с воздухом или со смесью воздуха с дымовыми газами рециркуляции, а также на газовую часть комбинированных горелок, применяемых в газоиспользующих установках. Стандарт не распространяется на горелки, в которых для интенсификации процесса горения применяют дополнительные средства (электрическую или акустическую энергию, кислород); радиационные трубы; горелки, при работе которых образуются продукты сгорания, используемые в качестве контролируемой атмосферы; горелки инфракрасного излучения; горелки, являющиеся составной частью газоиспользующего оборудования для применения в быту и предприятиями общественного питания; горелки мартеновских печей, ванных регенеративных стекловаренных печей; горелки факельных установок для сжигания сбросных газов. Стандарт применяется для всех видов испытаний указанных горелок, в т.ч. сертификационных
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
1/12/1999
SKU: RUSS60032
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
27 Power and heat engineering »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
016/2011 TR CU. On safety of gaseous fuel machines »
Regulations and standards (to ТР ТС ТС 016/2011) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.1 Machinery, equipment and components for general engineering applications »
4.13.1.4 Thermal and electrothermal equipment »
ISO classifier »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.20 Gas burners »
National standards »
27 ENERGY AND HEATING TECHNOLOGY »
27.060 Burners. Boilers »
27.060.20 Gas burners »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E2 Steam-powered equipment »
E29 Test methods. Packaging. Marking »
As a Replacement Of:
GOST 29134-91: Gas burners. Test methods
The Document References:
GOST 12.1.028-80: System of the standards for safety of work
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 16842-82: Industrial radio-interferences. Test methods for radio-interference sources
GOST 17356-89: Gas, oil fuel and combined burners. Terms and definitions
GOST 21204-97: Industrial gas burners. General technical requirements
GOST 29134-91: Gas burners. Test methods
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.549-86: The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with non-specified tolerances
GOST R 51320-99: Electromagnetic compatibility of technical equipment. Man-made radio disturbance. Test methods for technical equipment which are man-made radio disturbance sources
GOST R 51383-99: Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
The Document is Referenced By:
Decision 86: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, as a result of which, on a voluntary basis, compliance with the requirements of the technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016 / 2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards containing rules and methods of research (testing) and measurements, including sampling rules necessary for the application and fulfillment of requirements technical regulations of the Customs Union "On the safety of devices operating on gaseous fuel" (TR CU 016/2011) and the implementation of conformity assessment of objects of technical regulation
GOST 31850-2012: Automatic forced draught burners for gaseous fuels. Technical requirements, requirements of safety and test methods
GOST R 50591-2013: Gas-consuming thermal units. Industrial gas burners. Limiting concentration rates of NOx in combustion products
GOST R 50942-96: Industrial gas-using equipment. Air heaters. Test methods
GOST R 51383-99: Automatic forced draught burners for gaseous fuels. Technical requirements, safety requirements and test methods
GOST R 51721-2001: Installation for thermal utilization of wastes. General test methods
GOST R 52229-2004: Ignition control devices. General specifications
GOST R 55682.8-2013: Water-tube boilers and auxiliary installations. Part 8. Requirements for firing systems for liquid and gaseous fuels for the boiler
Order 498: List of questions proposed in the qualification examination for certification of experts in the field of industrial safety
RD 153-34.1-30.106-00: Rules for technical operation of gas-handling facilities for gas-turbine and combined-cycle units at thermal power plants
SO 34.03.355-2005: Methodological instructions for ensuring fire and explosion safety during operating power gas turbine electric power units.
VRD 39-1.12-012-2000: Index of Standards Developed by Gazprom OAO Organizations and Facilities
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
