imgalt

GOST 9066-75

ГОСТ 9066-75

Studs for flanged connections with medium temperature 0 °C to 650 °C. Types and main dimensions

Шпильки для фланцевых соединений с температурой среды от 0 °С до 650 °С. Типы и основные размеры

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)

The standard applies to studs one-sided and two-sided for flange connections of steam and gas turbines, steam boilers, pipelines and fittings, fittings, instruments, devices and tanks with medium temperatures from 0 to 650 ° С

Стандарт распространяется на шпильки односторонние и двусторонние для фланцевых соединений паровых и газовых турбин, паровых котлов, трубопроводов и соединительных частей, арматуры, приборов, аппаратов и резервуаров с температурой среды от 0 до 650°С

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of Standards of the Council of Ministers of the USSR, 3/28/1975

SKU: RUSS60034

Price: $233.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.2 Fasteners »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »

National Standards for OKSTU » INDUSTRIAL PIPELINE FITTINGS AND GATE VALVES » General rules and regulations »


As a Replacement Of:

GOST 9066-69: Double-sided pins for flanged joints for Pd greater than or equal to 40 kgf / cm2

The Document References:

GOST 19256-73: Bars for metric thread knurling. Diameters.

GOST 19268-73: Straight machine reamers with tapered shank for working parts of light alloys. Design and dimensions

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions

GOST 25670-83: Basic norms of interchangeability. Limit deviations of dimensions without tolerance indication

GOST 4751-73: Screw rings. Specifications

GOST 6636-69: Standard linear dimensions

GOST 9066-69: Double-sided pins for flanged joints for Pd greater than or equal to 40 kgf / cm2

ST SEV 180-75: Basic norms of interchangeability. The thread is metric. Profile

The Document is Referenced By:

GOST 20700-75: Bolts, studs, nuts and washers for flanged and anchor connections, corks and yokes with medium temperature from 0 to 650 °C. Specifications

GOST 28759.5-90: Flanges of vessels and apparatuses

GOST 34484-2018: Stationary steam turbines. Strength calculation standards for cylinder bodies and valves

GOST 8050-85: Carbon dioxide,

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

OST 108.275.52-80: Loop units for pipe hangers of CHP plant and nuclear thermal power plant. Design and dimensions.

OST 108.275.53-80: Loop units for pipe hangers of nuclear thermal power plant. Design and dimensions.

OST 108.764.01-80: Cylindrical helical springs for CHP plant and NTP plant pipeline hangers. Construction, dimensions and specifications.

OST 153-34.0-974-99A: Assembly units and support parts for station pipelines of nuclear power plants Py <= 4.0 MPa (40 kgf/cm2). Support clamp sliding, guide and fixed. Design and dimensions

OST 24.125.113-01: CHP and NTPP pipeline suspensions. Clamp units for horizontal pipelines. Design and dimensions.

OST 24.125.118-01: CHP and NTPP pipeline suspensions. Clamp suspensions on support beam with lugs. Design and dimensions.

OST 24.125.122-01: CHP and NTPP pipeline suspensions. Spring clamp suspensions on support beam. Design and dimensions.

OST 24.125.127-01: CHP and NTPP pipeline suspensions. Clamp units for vertical pipelines. Design and dimensions.

OST 24.125.151-01: Fixed support for thermal and nuclear power plants piping. Design and dimensions.

OST 24.125.154-01: Slide bearings for pipelines thermal and nuclear power plants. Design and dimensions.

OST 24.125.24-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.

OST 24.125.25-89: Flanges of welded butt joint with depression for NPP pipelines. Design and dimensions.

OST 24.125.26-89: Flanges connecting ledge welded butt joint for NPP pipelines. Design and dimensions.

OST 24.125.54-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.

OST 24.125.55-89: Flanges of welded butt joint with depression for NPP pipelines. Design and dimensions.

OST 24.125.56-89: Flanges of welded butt joint with ledge for NPP pipelines.Design and dimensions.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

OST 26-02-1496-76: Air, gas and liquid medium vessels and devices. Technical specifications.

OST 26-2040-74: Pins for flanged connections. Design and dimensions

OST 26-2040-96: Studs for flanged joints. Design and dimensions

OST 34-13-941-87: Protective screens. Technical conditions

RD 26.260.010-97: List of Regulatory Documents on Standardization for Pressure Vessels and Apparatus

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 38.13.004-86: Operation and repairs of process pipelines operating under pressure up to 10.0 MPa (100 kgf/cm2)

RD 39-132-94: Regulations for Operation, Inspection, Repair and Rejection of the Field Pipelines 1994

VNTP 36-84: Norms of technological design of coal and shale mines. Section "Pipelines laid in underground workings"

VSN 362-87: Disinfections and Etching of Pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!