imgalt

GOST 19537-83

ГОСТ 19537-83

Gun grease. Specifications

Смазка пушечная. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)

The standard applies to gun grease (PVC lubricant), designed to protect the surfaces of metal products from corrosion at temperatures from minus 50 to plus 50 ° С under storage conditions.

Стандарт распространяется на пушечную смазку(смазку ПВК), предназначенную для защиты от коррозии поверхностей металлических изделий при температурах от минус 50 до плюс 50°С в условиях складского хранения.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 12/14/1983

SKU: RUSS60037

Price: $56.00

English keywords: industrial oils; lubricants;


imgalt

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.5 Lubricants and preservation materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.9 Petroleum products of industrial and domestic consumption, lubricating oils and greases, plastic »

ISO classifier » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National standards » 75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION » 75.100 Lubricants, industrial oils and related products »

National Standards for KGS (State Standards Classification) » Latest edition » B Oil products » B3 Paste lubricants » B36 Lubricants for conservation (general purpose and rope) »

National Standards for OKSTU » OIL, PETROLEUM PRODUCTS, GAS » Lubricants »


As a Replacement Of:

GOST 19537-74: Plastic lube PVK. Specification

The Document References:

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 12026-76: Filter paper for laboratory application

GOST 14710-78: Petroleum toluene

GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage

GOST 18300-87: Technical rectified ethyl alcohol. Specifications

GOST 23258-78: Plastic lubricants

GOST 2477-65: Petroleum and petroleum products. Method for determination of water content

GOST 2517-85: Crude oil and petroleum products. Methods of sampling

GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 5346-78: Plastic lubricants. Methods for determination of penetration with the conical penetrometer

GOST 5789-78: Reagents. Toluene. Specifications

GOST 589-85: Detachable conveyor chains

GOST 5985-79: Petroleum products. Method for determination of acidity and acid number

GOST 6037-75: Lubricating greases. Method for the determination of creeping tendency

GOST 6307-75: Petroleum products. Method of test for water-soluble acids and alkalies

GOST 6709-72: Distilled water. Specifications

GOST 6793-74: Petroleum products. Method of drop point determination

GOST 859-2001: Copper. Grades

GOST 859-78: Copper. Grades

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property

GOST 9.080-77: Unified system of corrosion and ageing protection. Plastic greases. Accelerated method for determination of corrosion effect on metals

Letter 2929-IK/03: About the presence of a typo in GOST 19537-83

The Document is Referenced By:

GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements

GOST 13165-67: Compression springs for machine retaining devices. Design and dimensions

GOST 158-74: Knife sections ledger plates and knife backs for cutter bars of agricultural machines. Specifications

GOST 17679-80: Light yokes for pipe-line and cable fixing. Design and dimensions

GOST 18489-73: Sealing off ropes in the form of a ball. Design and dimensions

GOST 18954-73: Gas sampling and storage glass apparatus and tubes (pipettes). Specifications

GOST 19031-73: Closing up for ropes and their components. Specifications

GOST 2172-80: Aviation steel ropes

GOST 22130-2018: Steel piping details. Movable supports and hangers. Specifications

GOST 22130-86: Steel Pipeline Parts Movable supports and suspensions Specifications

GOST 22786-77: Bimetallic weldless tubes for shipbuilding

GOST 22992-82: Household devices, operating on the liquid fuel

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23466-79: Fire aerial ladder. General specifications

GOST 2361-74: Limiters for cases flap covers. Specifications

GOST 24201-80: Connective and fastening components of glass pipelines

GOST 24379.0-2012: Foundation bolts. General specifications

GOST 24379.0-80: Foundation bolts. General specification

GOST 26118-84: Electric energy semiconductor converters with power 5 kV.A and higher. Marking, packing, transportation and storage

GOST 27174-86: Open-type alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 a/h

GOST 33164.1-2014: Mining equipment. Longwall powered roof shocks. Section of support. General specifications

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 34059-2017: Internal buildings and structures utilities. Arrangement of heating, heating and cooling water supply systems. General technical requirements

GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods

GOST 4860.1-83: Glands for for electric cables and wires

GOST 6247-79: Steel welded barrels with rolling hoops on the shell

GOST 7370-2015: Railway frogs. Specifications

GOST 8117-74: Ship's bells. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9817-95: Household apparatus using the solid fuel. General specifications

GOST 9984-85: Ceramic support insulators rated for voltage over 1000 v

GOST R 50399-92: Air-foam nozzles. Specifications

GOST R 51611-2000: Special purpose rounds for self-defence tubeless fire-arms (complex 'OSA'). General technical requirements. Safety requirements and test methods

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 55429-2013: Hoop-in detachable joints of pipelines. Design, dimensions and general specifications

GOST R 57420-2017: Heat recovery steam generators. Сonditions of еquipment storage, handling and preservation

GOST R 58873-2020: Marine instrument glands for single electric cables input. Specifications

GOST R 70464-2022: Three-axle axle suspension bogies for freight wagons. General specifications

Letter 2929-IK/03: About the presence of a typo in GOST 19537-83

MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations

OST 1 00846-92: Two-lever locks. Technical conditions.

OST 1-00555-72: Lock for folding doors. Technical specifications

OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.

OST 24.023.29-84: Production planning system. Expanded plastic details produced by compression moulding and high-pressure die casting. Standard techniques and procedures.

OST 24.200.02-91: Assembling units of steel pipelines on nominal pressure<=10 MPa (100 kgf/cm2) of complete technological lines. General specifications.

OST 26.260.758-2003: Metal structures. General technical requirements.

OST 26-04-280-93: Pipeline fittings of cryogenic equipment products. General specifications.

OST 36-141-87: free metal Flange for plastic pipes for Pnom. to 1.0 MPa. Specifications.

OST 36-146-88: Bearings for steel industrial pipelines for P 10 MPa. Specifications.

RD 24.207.09-90: Pipe fittings. Temporary anti-corrosion protection. General requirements

RD 31.2.07-2001: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope

RD 31.27.03-95: Fuels, oils, lubricants and special liquids for ships of sea transport. Nomenclature and scope

RD 34.39.201: Guidelines for Installation of Steam and Water Piping Systems in Thermal Power Stations

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

RD 36-62-00: Hoisting equipment. General technical requirements.

RD 39-2-399-80: Methodological Guidelines for Drilling Core Oil and Gas Wells

RST RSFSR 643-80: Black steel economic dishes . General specifications

ST TsKBA 061-2010: Pipe fittings. Temporary anti-corrosion protection. General requirements for the choice of means and methods of protection

TU 16-525.609-85: Asynchronous motors AIS80 - AIS112, supplied for export. Technical conditions

TU 24-1.1787-78: Shoe brakes with electromagnet of type TKT and TKP. Technical conditions

TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions

TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20365-94: Power valves. General technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English
Price: $201.00
imgalt
Metals. Methods of tension test
Language: English
Price: $469.00
imgalt
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English
Price: $295.00
imgalt
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English
Price: $299.00
imgalt
Dependability in technics. Terms and definitions
Language: English
Price: $233.00
imgalt
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English
Price: $542.00
imgalt
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English
Price: $205.00
imgalt
Natural gas for industrial and municipal purposes. Technical conditions
Language: English
Price: $267.00
imgalt
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English
Price: $1,126.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!