GOST 2.601-68
ГОСТ 2.601-68
|
|
Unified system for design documentation. Exploitative documents
Единая система конструкторской документации. Эксплуатационные документы
Status: Not effective - Superseded. IUS 5-1996
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
7/23/1968
SKU: RUSS60090
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
2 Product quality assurance »
2.1 Ensuring product quality at stage of technical preparation of production »
2.1.1 Design preparation of production »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.110 Technical product documentation »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T5 Documentation System »
T52 Design Documentation System »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Unified system for design documentation (ESKD) »
The Document is Replaced With:
GOST 2.601-95: Operational documents
The Document References:
GOST 2.102-68: Types and complete set of design documents
GOST 2.104-68: Unified system for design documentation. Basic inscriptions
GOST 2.105-68: Unified system for design documentation. General requirements for textual documents
GOST 2.603-68: Unified system for design documentation. Rules of modification in maintenance and repair documentation
GOST 2.605-68: Unified system for design documentation. Technical educational placards. General technical requirements
GOST 2310-70: Steel bench hammers
GOST 5629-64: Paper high voltage capacitors
GOST 5773-68: Books and magazines. Sizes
GOST 5915-70: Hexagon nuts, product grade B. Construction and dimensions
GOST 7283-54: Round nose pilers
GOST 7811-70: Hexagon reduced head bolts with guide neck, product grade A. Construction and dimensions
GOST 8367-67: Electronic low-power lamp type 6A8 for devices of broad application
GOST 9238-73: Dimensions of approach of buildings and rolling stock of railways of 1520 (1524) mm gauge for lines with the speed of trains not exceeding 160 km / h
The Document is Referenced By:
GOST 10028-81: Glass capillary viscosimeters. Specifications
GOST 10036-75: Diffusers, protective and decorative glasses made of lime silicate glass for luminaries. General specifications
GOST 10150-88: Marine, diesel locomotive and industrial diesel engines
GOST 10180-90: Concretes. Methods for strength determination using reference specimens
GOST 10264-82: Light signaling fittings
GOST 10272-77: Double entry centrifugal pumps. Specification
GOST 10393-74: Piston compressors for railway stock
GOST 10512-78: Magnetic and electromagnetic separators. Specification
GOST 10512-93: Magnetic and electromagnetic separators
GOST 10529-86: Theodolites. General specifications
GOST 10556-78: Reciprocating internal combustion engines. Centrifugal oil cleaners with hydraulic drive rotors. General specifications
GOST 10578-86: Diesel engine fuel pumps. Types, basic parameters and technical requirements
GOST 10580-74: Foundry equipment. General specifications
GOST 10717-75: Instruments for measuring hardness. Types and main parameters
GOST 10718-81: Hydrocyclones. Specification
GOST 10731-85: Surface-type evaporators for steam-turbine power stations
GOST 10778-83: Spatulos. Specifications
GOST 10908-75: Mechanical quadrants with level. Specifications
GOST 10935-82: Freight box cars of mainline railways, gauge 1520 mm, technical requirements
GOST 10944-75: Control valves of the heating installations for building water heating systems
GOST 11013-81: Moving-coil oscillograph galvanometers
GOST 11030-93: Motor graders
GOST 11102-75: Acceptance and acting instruments and devices for diesel automation. Types, basic parameters and technical requirements
GOST 1121-75: Flat-parallel glass. Sets
GOST 11264-73: Chocks. Specifications
GOST 11379-80: Dynamic Pumps for waste liquids. General specifications
GOST 11442-90: General-purpose axial fans
GOST 11476-79: Control cash machines. Specifications
GOST 11614-94: Semi-automatic flushing valves. Specifications
GOST 11732-78: Horizontal jigging conveyers. Specification
GOST 11823-74: Backward lifting valves from gray and malleable iron for Pd up to 2,5 MPa (25 kgf / cm2). Technical requirements
GOST 11920-85: General purpose oil-immersed power transformers rated for voltage up to 35 kv inclusively
GOST 12.2.003-74: Occupational safety standards system. Industrial equipment. General safety requirements
GOST 12.2.019-76: Occupational safety standards system. Agricultural tractors and self-propelled machines. General safety requirements
GOST 12.2.029-77: Occupational safety standards system. Holding devices. General safety requirements
GOST 12.2.041-79: Occupational safety standards system. Drilling equipment. Safety requirements
GOST 12.2.044-80: Occupational safety standards system. Machines and equipment for oil transportation. Safety requirements
GOST 12.2.054-81: Acetylene installations
GOST 12.2.063-81: Occupational safety standards system. Industrial pipeline valves. General safety requirements
GOST 12.2.088-83: Standards system of labor safety. Ground equipment for well repair and realization. Safety general requirements
GOST 12.2.132-93: Occupational safety standards system. Oil Extraction Wellhead Equipment. General Safety Requirements
GOST 12.3.001-73: Occupational safety standards system. Pneumatic actuators. General safety requirements
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.4.070-79: Occupational safety standards system. Signals of pre-explosive concentrations, thermochemical. General specifications
GOST 12018-82: Pneumatic screw pumps for cement. General specifications
GOST 12049-75: D. C. Motors for floor railless electrified transport trucks. General specifications
GOST 12232-89: Carbon brushes for electrical machines. Dimensions of carbon brushes and methods for determination of electrical contact resistance between the brush and a shunt and break out force of a shunt
GOST 12367-85: Tube mills of grinding units. General technical specifications
GOST 12376-71: Single rotor crusher for medium and small grinding. Specifications
GOST 12434-83: Low-voltage switching devices. General specifications
GOST 12633-90: Hand-held pneumatic rotary machines
GOST 12674-73: Tubular shut-off diaphragm brass valves for Freon for Pd 1.6 MPa (16 kgf / cm2 Specification
GOST 12962-80: Medium expansion foam-making branch pipes. Specifications
GOST 12963-93: Suction nets. Specifications.
GOST 12965-85: General purpose oil-immersed power transformers rated for voltages 110 and 150 kv
GOST 13.1.114-90: Reprography. Micrography. Microfishes of catalogues. General requirements and norms
GOST 13.2.001-80: Reprography. Copirography. Electrophotocopying reproduction machine. Types and main parameters
GOST 13252-73: Check valves reversible rotary, made of steel for design pressure Pd 16 MPa (160 kgf / cm2) Technical requirements
GOST 13531-74: Concrete placers for precast reinforced concrete factories
GOST 13822-82: Generating sets and moving diesel-power stations. General specifications
GOST 13877-80: Sucker rods and couplings
GOST 13981-77: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 13981-87: Forms for reinforced concrete pressure pipes made by vibrohydropressed method. Specifications
GOST 14012-76: Tachometric ball-based flowmeters SSE. Specification
GOST 1405-83: Pinch and wrenching steel bars. Specifications
GOST 14110-80: Reusable semirigid slings. Specifications
GOST 14167-83: Turbine cold water meters
GOST 14177-88: Spindles with built-in drive
GOST 14234-84: Audio frequency signal transformers for domestic radio equipment. General specifications
GOST 14265-79: Direct action contact analog electrical measuring instruments
GOST 14279-79: Sleeved water collecting. Technical conditions
GOST 14286-69: Wrenches for fire connecting equipment. Specifications
GOST 14294-75: Pneumatic hand shears and nibblers. Specifications
GOST 14630-80: Fire water sprinklers and drenchers
GOST 14651-78: Electrode holders for manual arc welding
GOST 14695-80: Compact unit substations
GOST 14794-79: Concrete current-limiting
GOST 14901-93: Moulds for the manufacture of industrial rubber articles
GOST 14965-80: Three-phase synchronous generators of power over 100 kw
GOST 15542-79: Flame-proof mine power transformers. General specifications
GOST 15594-80: Throw-over type jaw crawler-mounted log loaders
GOST 15607-84: Baudot code start-stop apparatuses for alphabetic telegraphy
GOST 15616-84: Pneumatic screw pumps for cement. General specifications
GOST 1561-75: Air reservoirs for railway car automatic brakes. Specifications
GOST 15961-89: Metal forging machines. General requirements for conditions and methods of accuracy measuring
GOST 16024-79: Cryogenic vessels. Specification
GOST 160-84: Spindles for twisting and spinning machines
GOST 1608-88: Incandescent lamps for ships
GOST 16140-77: Collapsible racks. Specifications
GOST 16162-85: Standard reducers. General specifications
GOST 16215-80: Fork-lift trucks for general purposes
GOST 16264.0-85: Low-power electric motors
GOST 16287-77: Glass industrial electrodes for determination hydrogan ion activation SSI. Specifications
GOST 16308-84: Thermal current relays. General specifications
GOST 16324-83: Cast iron diaphragm control valves with pneumatic diaphragm actuator
GOST 16325-76: Digital computers. General technical requirements
GOST 16518-87: Machine vice hand and mechanical drives. General specifications
GOST 16526-70: Self-propelled, agricultural and wheeled road-construction machines. Low frequency vibration of the working. Methods for tests
GOST 16528-81: Rectangular magnetic plates. Specification
GOST 16935-93: Manually and power driven round rotary tables
GOST 17032-71: Horizontal steel tanks for oil-products. Types and principal dimensions
GOST 17411-72: Hydraulic gears. General technical requirements
GOST 17429-80: Magnetic catchers. Specification
GOST 17493-80: Electric machine frequency converters with power rating 250 kw up
GOST 17523-85: Electromagnetic relays. General specifications
GOST 17526-72: Reliability of machine-building products. Information collecting and processing system. Requirements for the content of forms of accounting for developments, damages and failures
GOST 17544-85: General purpose power oil transformers of voltage classes 220, 330, 500 and 750 kv
GOST 17677-82: Light fixtures
GOST 17792-72: Standard reference silver-silver chloride saturate electrode of second class
GOST 18058-80: Three-phase asynchronous squirrel-cage submersible electric motors series ПЭД. Specifications
GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications
GOST 18104-81: Forms of steel for the manufacture of reinforced concrete centrifuged non-pressure pipes. Specification
GOST 18130-79: Semi-automatic machines for consumable electrode arc welding
GOST 18140-84: SSI differential pressure gauges. General specifications.
GOST 18142.1-85: Semiconductor power rectifiers of 5 plus kw capacity
GOST 18142-80: Electricity converters, static, semiconductor, ac to dc (rectifiers). General specifications
GOST 18174-83: Automatic remote control systems for marine propelling diesels
GOST 18194-79: Installations for oil and oil products bottom loading unloading from railway tank cars. Technical specifications
GOST 18200-90: Above 200 kW rotating electric machines. Synchronous engines. General specifications
GOST 18324-73: Ionizing radiation source units for radioisotope instruments of relay type
GOST 18398-81: The ionizing radiation germanium detectors for spectrometry. General specifications
GOST 18464-87: Hydraulic cylinders
GOST 18518-80: Automatic machines
GOST 18521-83: Shot blasters
GOST 185-70: Three-phase asynchronous crane motors. Specification
GOST 18580-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 4 MPa (40 kgf / cm2). Specification
GOST 18581-73: Check valves reverse flanged from corrosion-resistant steel to PN 4 MPa (40 kgf / cm2). Specification
GOST 18582-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 6,4 MPa (64 kgf / cm2)
GOST 18583-73: Check valves reversible rotary with single disk made of steel for design pressure Pd = 10 MPa (100 kgf / cm2)
GOST 18584-73: Check valves reversible rotary with single disk, made of steel for design pressure Pd 16 MPa (160 kgf / cm2). Specification
GOST 18833-73: Lever-gearing measuring heads. Specifications
GOST 18864-82: Drawing devices. Specification
GOST 18865-82: Drafting machines. Specification
GOST 18896-73: Steel thick-walled drums for chemical products. Specifications
GOST 18910-80: SSI hydraulic instrumentation and devices
GOST 18953-73: SSI electrical power supply units
GOST 18962-86: Floor-mounted machines of railless electric transport
GOST 19126-79: Metallic medical instruments
GOST 19132-86: Contact clips for mounting in blocks
GOST 19264-82: Control electromagnets. General specifications
GOST 19294-84: Low-power general-purpose transformers
GOST 19498-74: Sand slingers. General specifications
GOST 19523-74: The motors, three-phase asynchronous squirrel-cage series 4A with power from 0.06 to 400 kW. General specifications
GOST 19523-81: Electric rotating machines sized from 50 to 355. Asynchronous motors of 4A series, three-phase with squirrel-cage rotor. Specification
GOST 19584-80: Units and replaceable parts of universal re-adjustable hammer dies for precision die forging by means of crank presses
GOST 19734-80: Input control devices for residential and public buildings
GOST 19740-74: Vertical centrifugal pumps
GOST 19822-88: Industrial container. Specifications
GOST 1983-89: Voltage transformers
GOST 19855-74: Glass mercury contact thermometers
GOST 19875-79: Self-recording quickly-responding electrical measuring instruments
GOST 19876-81: Dc measuring digital bridges
GOST 19881-74: Potentiometric analyzers for pH-control of milk and dairy products. General specifications
GOST 19930-91: Sewing domestic machines. General specifications
GOST 2.105-68: Unified system for design documentation. General requirements for textual documents
GOST 2.106-68: Unified system for design documentation. Textual documents
GOST 2.108-68: Unified system for design documentation. Specifications
GOST 2.601-95: Operational documents
GOST 2.602-68: Unified system for design documentation. Repair documents
GOST 2.609-79: Unified system for design documentation. Order of development, endorsement and approval of operation and repair documents
GOST 20180-91: Radioisotope densitometers for liquid and pulp measuring
GOST 20223-74: Spray guns for pneumatic spraying. General specifications
GOST 20245-74: Hydraulic apparatuses
GOST 20245-95: Volumetric hydraulic actuators. Hydraulic apparatus. Rules of acceptance and test methods.
GOST 20247-81: Power electric-furnace transformers and transformer sets
GOST 20307-74: Reliability of machine-building products. Information collecting and processing system. Report on malfunction of part
GOST 2036-77: Vertical bucket excavators. Specification
GOST 2037-82: Auger conveyors, stationary, general purpose. General specifications
GOST 20424-75: Motors three-phase asynchronous short-circuited built-in cold-oil-resistant. General specifications
GOST 20493-75: Voltage detectors. General technical requirements
GOST 20493-90: Voltage detectors. General specifications
GOST 20494-75: Isolation bars operational and for grounding. General specifications
GOST 20494-90: Operative insulating rods and portable grounding rods
GOST 20548-87: Heating hot-water boilers with heating outputs
GOST 20572-83: Two-screw pumps and pump units. Specification
GOST 20719-83: Hydraulic motors
GOST 20783-81: Metal trays for wiring
GOST 20791-83: Centrifugal glandless electric pumps. Technical requirements
GOST 20803-81: Metal boxes designed for electric wiring
GOST 20859.1-79: Units, semiconductor, of power unified series. General specifications
GOST 20859.1-89: Power semiconductor devices
GOST 20999-83: Numerical control units for metal-working machines. Part program data coding
GOST 21.101-79: System of building design document. Main requirements to working drawings
GOST 21.101-93: System of design documents for construction. rubber articles. General technical requirements. Main requirements for working documents
GOST 21021-85: Digital programmed control devices
GOST 2103-78: Belt conveyors, mobile, general purpose. Specification
GOST 21139-87: Industrial high-frequency generators and units for inducted and dielectric heating. General specifications
GOST 21208-75: Construction mast hoists. Specification
GOST 21253-75: Automatic filling and metering-and-filling machines
GOST 21339-75: Tachometers. General technical requirements
GOST 21339-82: Tachometers
GOST 21469-82: Drawing tools and sets thereof. Specification
GOST 21485-94: Flushing tanks with accessories. General specifications
GOST 21574-88: Electromagnetic multidisc clutches with magnetic flux conducting disks
GOST 21624-81: Motor vehicle maintenance and repair system. Requirements for maintainability of items
GOST 21671-82: Petrol electric units
GOST 21725-83: Direct-acting temperature regulators for air conditioners and closers. General specifications
GOST 21754-81: Welded metallic bellows. Specification
GOST 21758-81: Motor vehicle maintenance and repair system. Determination of maintainability and reparability characteristics during the tests
GOST 21792-89: Shipboard diesel installations. Acceptance and methods of ship trials
GOST 21915-93: Asphalt pavers
GOST 2201-79: Hose connections for 19 mm diameter air hoses. Specifications
GOST 22130-86: Steel Pipeline Parts
Movable supports and suspensions
Specifications
GOST 22171-90: Laboratory conductometric analysers of liquid. General specifications
GOST 22224-83: Hand flat spring dynamometers. Specifications
GOST 22281-76: Plate conveyors, stationary, general purpose. Specification
GOST 22373-82: Butterfly and ball valves for hydraulic turbines
GOST 22407-85: Synchronous explicit-pole generators of general purpose
GOST 22419-77: Universal platforms for railroad with gauge of 750 mm. Specification
GOST 22464-77: Thermoregulators for diesels and gas engines. General specifications
GOST 22472-87: Dies for a sheet-metal stamping
GOST 22502-89: Condensing units with hermetic refrigeration compressors for commercial refrigeration machinery
GOST 22521-85: Pressure, vacuum and pressure difference transmitters with pneumatic analogue output signal of gsp (state system of industrial devices and automation systems)
GOST 22522-91: Radioisotope fire detectors
GOST 22601-77: Control bars. Specifications
GOST 22647-77: Belt conveyors. Specification
GOST 22661-77: Grapples for containers with a gross weight of 3.0, 5.0, and 6.0 metric tons
GOST 22723-77: Machines for grinding wooden floors. Specification
GOST 22729-84: SSI fluid analyzers general technical specifications
GOST 22744-84: Flame photometers. General specifications
GOST 22778-77: Accessories for vertical cylindrical storage tank for petroleum products. Roll blocks. Basic parameters and dimensions. Technical requirements
GOST 22779-77: Accessories for vertical cylindrical storage tank for petroleum products. Siphon taps. Basic parameters and dimensions. Technical requirements
GOST 22784-77: Accessories for vertical cylindrical storage tank for petroleum products. Mechanisms for controlling crackers with a bypass. Basic parameters and dimensions. Technical requirements
GOST 22859-77: Hydraulic auto hoisters
GOST 22917-78: Cable couplings for arc welding. Specifications
GOST 23080-78: Rotary snowploughs. Acceptance rules and test methods
GOST 23111-78: Asynchronous three-phase short-circuited explosion-proof motors series V and VR with power from 0,25 to 110 kW. Specification
GOST 23125-78: Temperature alarms
GOST 23173-78: Garden barrows. General technical conditions
GOST 23200-78: Pleasure row boats and motor boats. General requirements when delivering for export
GOST 23212-78: Units of versatile press tools for clipping. Specifications
GOST 23213-84: Locomotive speedometers
GOST 23274-84: Mobile buildings. Electrical devices. General specifications
GOST 2327-89: Low-voltage switches, switch-disconnectors. General technical specifications
GOST 23301-78: Universal readjustable dies for element-by-element stamping. Technical requirements
GOST 23382-78: Piezosorption hygrometers. General specifications
GOST 23389-78: Field levelers
GOST 23434-79: Technical diagnosis. Diagnosis means. Carburettor engine ignition system. General technical requirements
GOST 23465-79: Automobile diesels. General specifications
GOST 23466-79: Fire aerial ladder. General specifications
GOST 23474-79: Cable apparatus. General technical requirements, acceptance rules and test methods
GOST 23496-86: Endoscopes with fiber optics. General specifications
GOST 23501.11-81: Computer-aided design systems. Working draught
GOST 23543-88: Geodesic instruments
GOST 2361-74: Limiters for cases flap covers. Specifications
GOST 2364-74: Angles for wood cases. Specifications
GOST 23660-79: System of technical maintenance and repair of equipment. Maintainability and reparability for item development
GOST 23677-79: Hardness meters for metals
GOST 23706-79: Ohmmeters. General specifications
GOST 23737-79: Standard electrical resistances
GOST 23750-79: Artificial weather apparatus with xenon emitters. General technical requirements
GOST 23773-88: Digital computers. Methods of testing
GOST 23913-79: Electrometric measuring instruments
GOST 24.104-85: Unified system of standards of computer control systems. Computer control systems. General requirements
GOST 24156-80: Steam-eductoring sprayers. General technical requirements
GOST 24201-80: Connective and fastening components of glass pipelines
GOST 24277-91: Stationary steam turbines for nuclear power plants. General specifications
GOST 24366-80: General purpose auto- and electric fork lift trucks. Load gripping devices
GOST 24376-91: Semiconductor inverters
GOST 24379.0-80: Foundation bolts. General specification
GOST 24406-80: Maintenance and repair system of building machinery. Power shovels and their components being passed and received from overhaul. Technical requirements
GOST 24407-80: Maintenance and repair system of building machinery. Jib cranes and their components being passed to and received from overhaul. Technical requirements
GOST 24408-80: Maintenance and repair system of building machinery. Rules of passing to and receiving from overhaul machines and their components. General requirements
GOST 24444-87: General assembly and technological requirements
GOST 24464-80: Feeding pumps of power untis of nuclear power plants
GOST 24466-80: System of agricultural equipment maintenance and repairing. Machines and equipment for husbandry and animal food production. Maintenance regulations
GOST 24555-81: The state system of testing the production. The procedure of verification of testing equipment. General principle
GOST 24570-81: Safety valves of stream and hot-water boilers. Technical requirements
GOST 24607-88: Semiconductor frequency converters
GOST 24638-85: Annular diamond drills for reinforced concrete constructions
GOST 24746-81: Sphere rebound hardness testing machines. Technical requirements
GOST 24752-81: Trolley bus bars of voltage up to 1 000 v
GOST 24790-81: Industrial diesel locomotive. General specifications
GOST 24814-81: Radial roof ventilators
GOST 24855-81: Analog converters for measurement of current, voltage, power, frequency, resistance
GOST 24857-81: Axial roof ventilators
GOST 24875-88: Small power electric machines. Tachogenerators. General specifications
GOST 2492-77: Switches (breakers), push-button and control posts with push-button. General specifications
GOST 2492-84: Power push-button switches and push-button control stations. General specifications
GOST 24936-89: Permanent magnets for electrotechnical products
GOST 25010-81: Howks for plastering. Specifications
GOST 25044-81: Technical diagnostics. Diagnosis of motor vehicles, tractors, agricultural, construction and road machinery. Basic principles
GOST 25056-81: Cast deck and ship hawses. Specifications
GOST 25176-82: Technical diagnostics. Diagnosis means of motor vehicles, tractors, agricultural, construction and road machinery. Classification. General technical requirements
GOST 25223-82: Wood-working equipment
GOST 25242-82: A.C. Digital automatic balanced bridges. General specifications
GOST 25242-93: Digital immitance parameter meters
GOST 25338-91: Woodworking equipment. Accuracy and rigidity test. General requirements
GOST 25476-82: Hydraulic fluid power and lubricating systems. Filters. Acceptance and Test methods
GOST 25560-82: Breathing vents for oil product tanks
GOST 25611-83: Dielcometric moisture meters for construction materials. General specifications
GOST 25646-83: Exploitation of building machines. General requirements
GOST 25781-83: Steel moulds for reinforced concrete members. Specifications
GOST 25858-83: Surface density and thickness measures for radioisotope thickness gauges. Specifications
GOST 25865-83: Vibration. Vibration measuring instruments with piezoelectric vibration measuring transducers. Main parameters and technical requirements
GOST 25932-83: Portable radioisotope soil and concrete moisture and density gauges. General specifications
GOST 25982-83: Stomatologic tips for a microdrive
GOST 26.007-85: Measuring and automation devices. Acceptance rules
GOST 26.203-81: Measure-computering complexes. Classification. General requirements
GOST 26033-91: Metering amplifiers of direct current and its voltage. General technical requirements and methods of tests
GOST 26044-83: Vibrating. Equipment for operational monitoring of vibration state of power hydroturbine units.
GOST 26053-84: Industrial robots. Acceptance rules. Methods of test
GOST 26054-85: Industrial robots for resistance welding
GOST 26056-84: Industrial robots for arc welding
GOST 26116-84: Well-logging apparatus.
GOST 26119-84: Electric household appliances. Operating documents. General technical requirements
GOST 26140-84: Medical x-ray units
GOST 26157-84: Taking lenses. General specifications
GOST 26227-84: Level gauges and sensors of the level of industrial application of GSP. General specifications
GOST 26242-90: Displacement transducers
GOST 26256-84: Loading chutes for trash ducts of the floors of residential and public buildings. Specification
GOST 26257-84: Permanent containers for trash ducts of the floors of residential and public buildings. Specification
GOST 26304-84: Industrial pipeline valves supplied
GOST 26346-84: Lighting buses for the ac voltage up to 660 v
GOST 26360-84: Searchlights for vessels
GOST 26367.1-93: Nickel-cadmium, sealed, cylinder accumulators
GOST 26367.2-93: Nickel-cadmium, sealed, disk accumulators
GOST 26367.3-93: Sealed nickel-cadmium prismatic rechargeable single cells
GOST 2648-78: SSI. Traction meters, pressure gauges and tension gauges. General specifications
GOST 26546-85: Chain variators. General specifications
GOST 26583-85: Maintenance system for technological equipment of engineering work. Metal cutting, forge-and-pressing, casting and woodworking operational and
GOST 26646-90: Stationary distillation desalinization units
GOST 26652-85: Scintillation detection blocks. General requirements and test methods
GOST 26679-85: Maintenance and repair system of building machinery. Motor graders and their components, being passed to and received from general overhaul. Technical requirements
GOST 26698.1-93: Rigs for blast-holes drilling in open-cast mining works
GOST 26698.2-93: Underground drill rigs
GOST 26840-86: Electrically-and-hand driven ventilating sets erv 72-2 and erv 72-3
GOST 26843-86: Nuclear power reactors. General requirements for control and testify systems
GOST 26881-86: Stationary leaden batteries
GOST 26957-86: Variator with wide angle belt pulleys. General specifications
GOST 26969-86: Standard orifice plates for flow meters. Specifications
GOST 26998-86: Polyamide dowels for buildings. Specifications
GOST 27174-86: Open-type alkaline nickel-cadmium rechargeable cells and storage batteries of capacity up to 150 a/h
GOST 27300-87: Information measuring systems. General requirements, complete set and rules of operation documentation composition
GOST 27336-93: Truck concrete pumps
GOST 27338-93: Concrete mixing plant
GOST 27339-93: Mixer trucks
GOST 27352-87: Road vehicles for fuelling and transportation of oil and petroleum products. Types parameters and general specification
GOST 27451-87: Ionizing radiation measurement instruments
GOST 27537-87: Digital indicators
GOST 27540-87: Gas and inflammable vapors thermo-chemical alarms
GOST 27544-87: Liquid-in-glass thermometers. General specifications
GOST 27590-88: Water heaters for heat supply systems
GOST 27598-94: Running rollers road vibration self-moving
GOST 27614-93: Cement carriers
GOST 27625-88: Power blocks for steam electric stations. Requirements for reliability, manoeuvrability and efficiency
GOST 27697-88: Industrial robots. Cyclic, point-to-point and continuous path of numerical control. Specifications and testing methods
GOST 27716-88: Masks for printed boards. General specifications
GOST 27851-88: Volumetric pumps
GOST 27874-88: Dialyzers designed for the extrarenal clearing of blood
GOST 27987-88: Potentiometric analyzer of liquid, SSI. General specifications
GOST 28167-89: Semiconductor alternating voltage converters. General specifications
GOST 28171-89: Gambling machines
GOST 28310-89: Solar collector. General specifications
GOST 28328-89: Round electromagnetic chucks
GOST 28456-90: Expansive dowels for building. General specifications
GOST 28641-90: Pack binding machines. General specifications
GOST 28708-90: Small mobile equipment for mechanization of agricultural operations
GOST 28717-90: Agricultural and forest machines. Cylinder driers. Methods of testing
GOST 28722-90: Agricultural and forest machines. Mower-crusher. Methods of testing
GOST 28757-90: Heaters for systems of regeneration of steam turbines for steam power plants. General specifications
GOST 2875-88: Prismatic measurers of plane angle
GOST 28778-90: Expansion bolt self-anchoring for building. Specifications
GOST 28798-90: Spring measuring heads. General specifications
GOST 28836-90: Resistive strain-gauge
GOST 28840-90: Machines for tension, compression and bending tests of materials
GOST 28841-90: Machines for fatigue testing of materials
GOST 28845-90: Machines for long time strength creep, testing and relaxation of materials. General technical requirements
GOST 28853-90: Installations, instruments, devices, units, functional modules of aggregate complex of technical means for local information-controlling systems (KTS LIUS). General requirements
GOST 28912-91: Filters for stores and filters-separators. Technical specifications
GOST 29146.1-91: Plugs, socket-outlets
GOST 2923-75: Flat glass plates for interference measurements ПИ60, ПИ80, ПИ100, ПИ120
GOST 297-80: Resistance welding machines
GOST 30137-95: Horizontal jigging conveyers. General specifications
GOST 30286-94: Industrial robots. Presentation of characteristics
GOST 30337-95: Lighting chains. General specifications
GOST 3050-77: Hose joints for flexible hoses
GOST 3124-77: Hose connections for flexible hoses of monitors. Specifications
GOST 3541-79: Forged steel rollers for cold rolling of metals
GOST 4025-95: Domestic meat mincers. Specifications
GOST 4119-76: Accessories sets for plane-parallel end measures of length. Main parameters and dimensions. Specifications
GOST 4623-80: Equipment for vertical and horizontal for petroleum products. The mechanism of control of the cracker (upper). Specification
GOST 4626-79: Equipment for horizontal tanks for petroleum products. Valve inlet. Specification
GOST 4871-77: Rheostats for starting and control for DC motors. General specifications
GOST 5.1553-72: Pulse full height angular steel valve Di 20 mm with electromagnetic drive. Quality requirements for certified products
GOST 5.1603-72: Vibration systems control unit. Quality requirements of certified products
GOST 5.1644-72: Axial fans. Quality requirements for certified production
GOST 5.1800-73: Plants for water final refinements of УФ-400А type. Quality requirements of certified products
GOST 5.1878-73: Grinding burnishing six-spindel machine-tool model 6ШП-100М. Quality requirements for certified products
GOST 5.1879-73: Semi-automatic centre machine model ЦС-50. Quality requirements for certified products
GOST 5.1948-73: Mechanical vibration stand ВУ-15М. Quality requirements for certified products
GOST 5.2019-73: Pump single-stage monoblock type ГНОМ-10-10. Quality requirements for certified products
GOST 5.2055-73: Remote control board 55-ПДУ. Quality requirements for certified products
GOST 533-85: Rotating electrical machinery. Turbo-generators. Enera l specifications
GOST 538-78: Window and door fittings. General specifications
GOST 5503-87: Bicycles
GOST 5762-74: Pipeline industrial valves. Gate valves PN £ 250. General specifications
GOST 5946-79: Conveyors, chain, suspension, load-carrying, general purpose. Specification
GOST 5976-90: Centrifugal fans for general use
GOST 6047-90: General purpose floodlights
GOST 6376-74: Hand anemometer accounting device. Specifications
GOST 6512-74: Metering spur gears. Specifications
GOST 6570-75: Electrical induction active and reactive energy meters. General technical specifications
GOST 6625-75: Mine local ventilating fans
GOST 6746-75: Capacitance measures general specifications
GOST 6825-74: Luminous lamps mercury-based of low pressure
GOST 6825-91: Tubular fluorescent lamps for general lighting service
GOST 6899-75: Manual hoists and trolleys. General specifications
GOST 6937-81: Conic crushers. Specification
GOST 7014-74: Manual drum winches. Specification
GOST 7090-72: Single-rotor hammer crushers
GOST 7183-72: Foammixers. Specifications
GOST 7183-93: Foam mixers. Specifications.
GOST 7193-74: Hand induction anemometer. Specifications
GOST 7328-82: General-purpose and reference mass gages
GOST 7428-74: Amplifying, rectifying and oscillator tubes with continuous anode dissipated power up to 25 w, and vacuum display tubes
GOST 7495-74: Trolleybuses for city single-stored, passenger. Technical requirements
GOST 7498-93: Hydro elevators for firefighting. Specifications.
GOST 7499-71: Fire standpipe Specifications
GOST 7513-75: Object micrometer. Specification
GOST 7746-89: Current transformers. General specifications
GOST 7866.1-76: Shipboard cables rubber insulated and rubber or lead sheathed. Specifications
GOST 7888-73: Pile driving hammers
GOST 7890-84: Travelling single-girder suspended cranes. Specifications
GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means
GOST 8.171-75: State system of ensuring the uniformity of measurements. Actual measures of the surface density for radiation thickness gauges. General specifications
GOST 8.326-78: The State Measurement System. Metrological assurance of development, manufacturing and operation of unstandardized measuring instruments. General principles
GOST 8.326-89: State system for ensuring the uniformity of measurements. Metrological certification measuring instruments
GOST 8.338-78: State system for ensuring the uniformity of measurements. Thermal converters of industrial thermocouple thermometers. Methods and means of verification
GOST 8.437-81: State system for ensuring the uniformity of measurements. Systems of information and measurement. Metrological insurance. General statements
GOST 8.438-81: State system for ensuring the uniformity of measurements. Systems of information and measurements verification. General statements
GOST 8037-80: Hose branchings. Specifications
GOST 8037-93: Hose branches. Specifications.
GOST 8213-75: Automatic consumable electrode arc welding machines.
GOST 8248-88: Round, flat, section cutting сrank shears closed construction. Parameters and dimensions accuracy norms
GOST 8250-78: Heavy duty drives control electromagnetic relays. General specifications
GOST 8476-78: Wattmeters and varmeters. General specifications
GOST 8476-93: Direct acting indicating analogue electrical measuring instruments and their accessories. Part 3. Special requirements for wattmeters and varmeters
GOST 8594-80: Installation boxes for switches and plug sockets for flush wiring
GOST 8615-89: Universal dividing heads
GOST 8709-82: Light boards for industrial and public buildings
GOST 8-82: Metal-cutting machine tools
GOST 8944-75: Ductile iron and steel fittings with parallel thread for pipelines. Technical requirements
GOST 9029-72: Fire turntable combined monitor
GOST 9039-73: Anamorphic attachments for motion-picture projector lenses. Specifications
GOST 9070-75: Viscometers for determination of relative viscosity of paint and lacquer materials. Specifications
GOST 9086-74: Shut-off valves, coupling brass at Pd = 1.0 and 1.6 MPa (10 and 16 kgf / cm2). Specification
GOST 9131-75: Safety valves lever-load flanged cast iron for Pd 1.6 MPa (16 kgf / cm2) and steel for Pd 2,5 MPa (25 kgf / cm2). Technical requirements
GOST 9244-75: Inside callipers graduated in 0,001 and 0,002 mm. Specifications
GOST 9413-78: Lighting panels for dwelling-houses. General specifications
GOST 9416-83: Building levels. Technical requirements
GOST 9486-79: Measuring ac bridges
GOST 9653-74: Indicators of the liquid level at Pd up to 4 MPa (40 kgf / cm2). Specification
GOST 9898-79: Diaphragm pneumatic actuators SSI. General specifications
GOST 9916-77: Oil coolers for stationary steam and gas turbines. Specification
GOST 9923-80: Manual fire barrel. Specifications
GOST 9933-75: Absolute pressure gauges and u-tubes combined pressure vacuum gauges
GOST ED1 2103-81: Conveyor belts of general purpose. Technical conditions
GOST ED1 22827-86: General-purpose self-propelled boom cranes. Specifications. Export addition
GOST R 21.1101-92: System of design documents for construction. General technical requirements. Main requirements for working documents
GOST R 50059-92: Travelling single-girder suspended cranes. Specifications
GOST R 50083-92: Concrete pump. General specifications
GOST R 50084-92: Truck mixer. General specifications
GOST R 50342-92: Thermoelectric converters. General specifications
GOST R 50353-92: Resistive temperature transducers. General specifications
GOST R 50398-92: Fire hydraulic elevator. Specifications
GOST R 50408-92: Foam mixers. Specifications
GOST R 50409-92: Medium expansions foam-making branch pipes. Specifications
GOST R 50655-94: Lighting chains. General specifications
GOST R 50759-95: Gas analyses for control of industrial and transport emissions. General specifications
GOST R 50760-95: Gas and aerosol analysers for air pollution monitoring. General specifications
GOST R 50775-95: Alarm systems. Part 1. General requirements. Section 1. General
GOST R 50831-95: Boiler plant. Heat-mechanical equipment. General technical requirements
GOST R 50851-96: Stainless steel sinks. Specifications
GOST R 52085-2003: Formworks. General specifications
GOST R 53290-2009: Fire engineering. Foam fire-extinguishing installations. Low expansion foam generators for subsurface extinguishing in tanks. General technical requirements. Test methods
GOST R 55173-2012: Boiler plant. General technical requirements
MI 1948-88: Recommendations. State system for ensuring uniformity of measurements. Water flow. The method of measurement of segmental diaphragms
MU 8.8-77: Guidelines for the examination of the reliability of measuring instruments
MUK 2.3.2.971-00: The order of sanitary-epidemiological examination of technical documents for food
NPB 158-97*: Special protective shoes for firefighters. General technical requirements and test methods
NPB 167-97*: Fire rescue rope. General technical requirements. Test methods
NPB 168-97*: Firefighter carbine. General technical requirements. Test methods
NPB 186-99: Fire equipment. Compressor unit for filling of iow-volume balloons with compress air breathing apparatus for fireman. General technical requirements. Test methods
NPB 197-2001: Fire elevators. General technical requirements. Test methods
NPB 314-2003: Firefoam elevators. General technical requirements. Test methods
NPB 59-97: Water and foam fire fighting systems. Fire foam mixers and dose device. Nomenclature of indices. general technical requirements. Test methods
NPB 61-97: Fire engineering. Foam fire fighting systems. Low expansion foam generators for subsurface fire fighting systems of the tanks. General technical requirements. Test methods
NPB 65-97: Optical and Electronic Optical detectors. General Technical Requirement. Testing Procedure
NPB 66-97: Self-contained fire detectors. General technical requirements. Test methods
OMU 42-21-27-88: Hyperbaric oxygenation devices. Operation and repair rules
ORMM-3 ASUTP: Industry-wide guidance materials on the creation and use of automated process control systems in industries (ORMM-3 process control systems)
OST 108.005.31-83: Industry-based system of product quality management in the power engineering industry. Assessment of quality level of heat-exchange equipment of nuclear power plants.
OST 12.28.333-91: Mining equipment. Products made of light alloys. Friction intrinsic safety. General technical requirements and test methods.
OST 22-1260-78: Machine cutting torches for piled-plate cutting by means of reduced pressure oxygen. Specifications.
OST 24.013.20-90: Forged steel rollers for cold rolling of metals. Specifications.
OST 24.090.39-78: Shell stacker cranes. Specifications.
OST 24.090.39-83: Shell stacker cranes. General specifications.
OST 24.191.08-81: Hook crane suspensions. Design and dimensions.
OST 26-01-147-89: Drying devices with rotating drums. General technical requirements.Printing telegraph and terminals for document electric communication. Methods of printed character parameter measurement.
OST 26-07-1023-80: Automatic pipeline fittings. General specifications.
OST 26-07-2046-82: Pipeline fittings. Application of standards of uniform system of design documentation (USDD).
OST 26-07-2069-86: Pipeline fittings for nuclear power facilities. Incoming control of materials of semi-finished products and component parts. Scope and methods.
OST 26-07-790-73: Devices for control of pipeline armature. General specifications.
OST 34 001-73: Lifting equipment. Requirements for materials
OST 34 002-73: Equipment and general-purpose machines. Requirements for materials
OST 34 005-75: Specifications. The procedure for approval, approval and state registration
OST 34 38.963-88: Coal mill. Maintainability. General requirements.
OST 34-13-959-88: Card of the technical level and product quality. Procedure of compilation and maintaining of the level card
OST 34-38-935-87: Steam Stationary Turbines. Reparability. General requirements.
OST 45.37-86: Organization of works regarding telephone repair.
OST 45.51-96: Automatic container telephone stations. Acceptance Rules
OST 45.64-96: Organization of repair of telecommunication facilities. Main provisions
OST 48-286-86: Single-stage Thickeners. Specifications.
OST 48-41-91: Engineering products of non-ferrous metallurgy. General Specifications.
OST 68-16-02: Cartographic instruments. General specifications
PB 10-14-92: Codes for installation and safe operation of lifting cranes
POT R O-97300-05-95: Rules for labor protection in food concentrate and vegetable drying industries of the food industry
PR 50-719-92: Rules for the application of the interstate standard GOST 2.601-68 "Unified system for design documentation. Operational documents"
R 50-609-30-87: Recommendations. Operation and repair of equipment. The procedure for the repair and acceptance of the repair. General requirements
RD 08-195-98: Instructions for the technical diagnosis of the state of mobile units for well repair
RD 09-167-97: Instructions for Arranging and Carrying out the Inspection in Design and Manufacture of Hazardous Production Facilities in the Chemical, Petrochemical and Oil Refining Industries
RD 153-34.0-04.185-2003: Machines and equipment for construction, technical re-equipment and repair of energy facilities. Requirements for design, materials, manufacturing, acceptance and testing
RD 26-07-268-87: Guidelines. The procedure for the development and certification of non-standard measuring instruments
RD 31.00.88-85: Recommendations for organizations and enterprises of the MMF on reducing the volume, simplifying the design and coordination of design documentation
RD 31.55.01.01-90: Spare parts for marine diesel engines of foreign construction. Steel piston heads. Technical requirements
RD 31.83.04-89: Labour safety rules in companies of the Ministry of Navy of the USSR.
RD 31.84.01-90: Uniform occupational safety rules for diving operations
RD 34.04.181: Standard Guidelines. Requirements for Organization of Maintenance and Repair of Buildings and Structures of Electric Power Generating Stations and Networks
RD 34.17.427-89: Procedural Guidelines. Nondestructive Testing at Thermal Power Stations. General Requirements
RD 34.35.412-88: Requirements for Acceptance into Operation from Installation and Adjustment of Thermal Power Station Process Control Systems
RD 34.40.506: Procedural Guidelines for Operation of Surface-Type Evaporator Units at Thermal Power Stations
RD 34.45.501-88: Model Guidelines for Operation of Generators at Electric Power Generating Stations
RD 34.45.620-96: Maintenance Requirements for Thyristor Excitation Systems
RD 39-0148311-601-85: Regulations on the system of maintenance and repair of electrical installations in oil production and drilling
RD 39-0148311-601-88: Regulations on the system of maintenance and repair of electrical installations in oil production and drilling. Part 1. General Provisions. Electrical equipment and power lines
RD 39-22-617-81: Uniform safety standards for the development of basic types of oil and gas equipment
RD 45.000.023-91: Rules for applying the provisions of state ESKD standards in the industry
RD 45.008-97: The program and test methods are typical for the purpose of approving the type of time-based telephone connection metering equipment (APUS) of local telephone communications
RD 50-134-78: Guidelines for monitoring the completeness of the presentation of occupational safety requirements in the design and technological documentation
RD 50-204-87: Procedural Guidelines. Equipment Reliability. Gathering and Processing Data on In-Service Reliability of Articles. Basic Provisions
RD 50-262-81: Guidelines. The procedure of metrological examination and certification of methods for qualifying assessment of fuels, oils, lubricants and special fluids
RD 50-634-87: Guidelines. The procedure for coordinating the use of fuels, oils, lubricants and special liquids in the technique of national economy
RD 50-640-87: Instructions. Computer aided design. The order of execution of works when creating systems
RD 50-680-88: Standardization management document. Methodical instructions. Automatic systems
RD RTM 26-07-230-79: Sectoral quality management system. Organization and regulation of the development of high-quality products, their production, applications and operation, the order and organization of the development of operational and repair documentation and provision
RD RTM 26-292-78: Industry quality management system of products. Departmental and state quality control and product testing. Organization and procedure for conducting product quality audits. Main provisions
RM 4-261-91: Process automation systems. Handbook for the implementation of design documentation
RSN 64-87: Engineering survey for construction. Technical requirements for the production of geophysical works. Electrical prospecting
RSN 66-87: Engineering survey for construction. Technical requirements for the performance of geophysical works. Seismic exploration
RTM 108.030.21-78: Calculation and design of thermal deaerators
RTM 24.080.23-72: Safety precautions. The content and construction of the section in the standards and design documents for machines and mechanisms for underground mining
RTM 25 212-86: Integrated automated control systems. Guidelines for the development of technical support. Methodology for the integration of technical equipment resources providing automated systems for various purposes. Part 10
RTM 25 212-86: Integrated automated control systems. Guidelines for the development of technical support. Methodology for the integration of technical equipment resources providing automated systems for various purposes. Part 10
RTM 25 212-86: Integrated automated control systems. Guidelines for the development of technical support. Methodology for the integration of technical equipment resources providing automated systems for various purposes. Part 10
RTM 25 212-86: Integrated automated control systems. Guidelines for the development of technical support. Methodology for the integration of technical equipment resources providing automated systems for various purposes. Part 10
RTM 25 212-86: Integrated automated control systems. Guidelines for the development of technical support. Methodology for the integration of technical equipment resources providing automated systems for various purposes. Part 10
RTM 26-79-72*: Application of standards of a unified system of design documentation (ESKD)
RTM 68-5-93: Geodetic searchers. General technical conditions
SP 42-101-2003: The general provision and construction gas distribution sistem from steel and polyethyelene pipes
TsRB-278: Rules for the Construction and Safe Operation of Cranes (Machines)
TU 24.08.1144-79: Car Decker 12U6
TU 24-00.10.019-88: Two-line manual lubricating station. Technical conditions
TU 24-09.411-82: Special electric bridge cranes
TU 24-1.1787-78: Shoe brakes with electromagnet of type TKT and TKP. Technical conditions
TU 25-1819.0021-90: Mechanical stopwatches "Glory" SDSpr-1-2-000, SDSpr-4b-2-000, SOSpr-6a-1-000
TU 26-01-949-85: The devices gummed with the mechanical mixing device of volume 1; 2; 3.2; 6.3; 10 and 16 m3
TU 26-01-957-85: Gummed capacitive devices
TU 26-02-1089-88: Type 1-AVG horizontal air coolers Technical conditions
TU 26-02-1098-89: Heat exchangers, shell and tube made of titanium. Technical conditions
TU 26-02-1102-89: Shell and tube heat exchangers of increased thermal efficiency with an expander on the housing
TU 26-05-108-88: Acetylene mobile generators of continuous action with a capacity of up to 3 m3
TU 34-38-20140-94: Valves of gas pipelines TPP. General technical conditions for major repairs
TU 34-38-20188-94: Frameworks, stairs and platforms of stationary boilers. General technical conditions for major repairs
TU 67-269-79: Self-tapping screw. Technical conditions
VSN 361-85: Installation of Process Equipment on Foundations
Customers Who Viewed This Item Also Viewed:
![imgalt](App_Themes/skin_1/images/sorrowleft.png) |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
![imgalt](App_Themes/skin_1/images/sorrowright.png) |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.