imgalt

GOST 23143-83

ГОСТ 23143-83

Enamels ЭП-773. Specifications

Эмали ЭП-773. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 2256 dated 12.28.91

The standard applies to enamel EP-773, which is a suspension of pigments and fillers in a solution of epoxy resin E-41 in a mixture of organic solvents with the addition of a hardener and intended for dyeing non-primed or primed EP-0010 primer-metal surfaces exposed to hot surfaces alkaline solutions. EP-773 enamels are applied by pneumatic spraying.

Стандарт распространяется на эмали ЭП-773, представляющие собой суспензию пигментов и наполнителей в растворе эпоксидной смолы Э-41 в смеси органических растворителей с добавлением отвердителя и предназначенные для окрашивания незагрунтованных или загрунтованных грунт-шпатлевками ЭП-0010 или ЭП-0020 металлическихповерхностей, подвергающихся действию горячих растворов щелочей. Эмали ЭП-773 наносят методом пневматического распыления.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 7/26/1983

SKU: RUSS60172

Price: $234.00

English keywords: lucky; paints; paints and varnishes;


imgalt

The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.6 Coating Materials »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.9 Testing and control of chemical and industrial products » 4.9.3 Products of paint and varnish industry »

ISO classifier » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National standards » 87 PAINT AND VARNISHING INDUSTRY » 87.040 Paints and varnishes »

National Standards for KGS (State Standards Classification) » Latest edition » L Chemical products and rubber-asbestos products » L2 Organic Chemical Products » L24 Varnish and enamel »

National Standards for OKSTU » PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS » Condensation resin enamels, primers and putties »


The Document is Replaced With:

GOST 23143-2023: Enamels EP-773. Technical conditions

As a Replacement Of:

GOST 23143-78: Enamels ЭП-773. Specifications

The Document References:

GOST 12.1.004-91: Fire safety. General requirements

GOST 12.1.005-88: General sanitary requirements for working zone air

GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination

GOST 12.3.005-75: Painting works

GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification

GOST 12.4.021-75: Ventilation systems. General requirements

GOST 13345-85: Tin-plate and black plate

GOST 14192-77: Marking of cargoes

GOST 15140-78: Paintwork materials. Methods for determination of adhesion

GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes

GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises

GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials

GOST 18188-72: Solvents of grades 645, 646, 647, 648 for paint materials. Specifications

GOST 19007-73: Paintwork materials. Method for determination of drying time and degree

GOST 19433-88: Dangerous goods. Classification and marking

GOST 2590-88: Round steel bars. Dimensions

GOST 27271-87: Paints and varnishes. Method for control of working life

GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance

GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument

GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'

GOST 6613-86: Square meshed woven wire gauzes

GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending

GOST 7417-75: Calibrated round steel

GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity

GOST 8784-75: Paint materials. Methods for determination of hiding power

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect

GOST 9980.1-86: Paint materials. Rules of acceptance

GOST 9980.2-86: Paint materials. Test sampling

GOST 9980.3-86: Paint materials. Packing

GOST 9980.4-86: Paint materials. Marking

GOST 9980.5-86: Paint materials. Transportation and storage

TU 21-0284461-058-90: Glass plates for special purposes

The Document is Referenced By:

GOST 12549-2003: Passenger cars of 1520 mm gauge main-line railways. Painting. Specifications

GOST 12549-80: Passenger cars of mainline railways track 1520(1524) mm gauge. Painting. Technical requirements

GOST 13354-91: Gated wooden patterns. Specifications

GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment

GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications

GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications

GOST 23846-79: Refrigerator cores for main railways of 1520 (1524) mm gauge. Paint coatings. Specifications

GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties

GOST 31365-2008: Paint coatings electrolocomotives and diesellocomotives of 1520 mm gauge mainline railways. Specifications

GOST 6572-91: Paint Coatings Of Tractors And Agricultural Machinery General Specifications

GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing

GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.

GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control

OST 26.260.18-2004: Process modules for oil and gas industry. General technical specifications

R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings

RD 24.202.03-90: Weatherproof lacquer coating for oil and gas processing equipment. Technical requirements.

RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

SNiP 2.03.11-85: Corrosion protection of buildings structures

ST TsKBA 021-2004: Painting and conservation of pipeline valves and drive devices for it supplied for nuclear power plants. Typical technological instructions for cleanliness, dyeing and conservation

ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Tight and slack wooden barrels
Language: English
Price: $349.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Software for measuring instruments. Procedure for of certification. General provisions
Language: English
Price: $356.86
imgalt
Vegetable oils. General technical requirements
Language: English
Price: $461.10
imgalt
Current transformers. General specifications
Language: English
Price: $715.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!