GOST 103-2006
ГОСТ 103-2006
|
|
Hot-rolled steel strips. Dimensions
Прокат сортовой стальной горячекатаный полосовой. Сортамент
Status: Effective
The standard applies to high-grade steel hot-rolled strip for general use and steel strip for nuts from 4 mm to 80 mm thick incl. and a width of 10 mm to 200 mm inclusive ..
Стандарт распространяется на сортовой стальной горячекатаный полосовой прокат общего назначения и стальной полосовой прокат для гаек толщиной от 4 мм до 80 мм включ. и шириной от 10 мм до 200 мм включ..
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/18/2008
SKU: RUSS60232
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
77 Metallurgy »
Standards for pipe fittings (TPA) »
10. Production »
10.2 Billets (forgings, stampings, rolling, castings, etc.) »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.4 Iron and steel products »
ISO classifier »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National standards »
77 METALLURGY »
77.140 Iron and steel products »
77.140.60 Steel bars and wire rod »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V2 Carbon steel of ordinary quality (ordinary stock) »
V23 Sheets and Stripes »
As a Replacement Of:
GOST 103-76: Hot-rolled steel strip. Dimensions
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 103-76: Hot-rolled steel strip. Dimensions
The Document is Referenced By:
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 21.501-2011: System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
GOST 25878-2018: Steel molds for the manufacture of reinforced concrete products. Pallets Technical specifications
GOST 32409-2013: Spring anchors to railway rails. Technical specification
GOST 32943-2014: Materials and systems for the protection and repair of concrete structures. Requirements to bonded connections of structural strengthening elements
GOST 4543-2016: Metal products from structural alloy steel. Specification
GOST 5521-93: Shipbuilding rolled steel
GOST 5799-2022: Flasks for paints and varnishes. Specifications
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 801-2022: Rolled bearing steel. Technical conditions
GOST 8717-2016: Concrete and reinforced concrete steps. Specification
GOST 9570-2016: Box and pestpallets. General specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 52927-2023: Rolled products for shipbuilding from steel of normal, increased and high strength. Technical conditions
GOST R 53192-2008: Welded steel structures of freight cars. Technical requirements
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 55374-2012: Alloyed structural rolled steel for bridge building. General specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 57351-2016: Building steel structures. General specifications
GOST R 70617-2022: Details of the grounding of marine electrical equipment and cables. Specifications
MDS 12-61.2012: The project for the production of works on the device of a rail track of a tower crane with a concrete beam BRP-62.8.3
ODM 218.6.031-2018: Guidelines for improving the reliability of protective and fortifications in emergency situations and natural hazards
PKO-2010.6: Reference materials for the design work of the electrical part of the project
RMD 12-21-2013 Sankt-Peterburg: Typical temporary means of fencing, arranging and decorating construction sites
TU 102-124-77: Aluminum hinged panels for BNP type boxes
TU 102-152-77: Two-layer metal coating panels without a soft waterproofing carpet for industrial buildings (type ППДС)
TU 102-162-78: Weighers prefabricated reinforced concrete belt type UBP
TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates
TU 102-356-83: Three-layer roofing panels from steel corrugated profile and mineral wool insulation
TU 102-358-83: Three-layer steel coating panels with mineral wool insulation for block boxes
TU 102-360-85: Aluminum aluminum masts for radio relay communication type MAP
TU 102-58-75: Asbestos-cement framework panels for walls and coatings of heated industrial buildings
TU 102-587-91: Production-auxiliary box
TU 102-79: Concrete belt weighting compounds type UE for main pipelines
TU 14-2-767-88: Hot-rolled steel strip with improved quality. Technical conditions
TU 5262-010-56506912-2004: Roadside restraints for cars, side, first type, metal. Technical conditions
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.