imgalt

GOST R 52034-2008

ГОСТ Р 52034-2008

Ceramic support insulators for voltage over 1000 V. General specifications

Изоляторы керамические опорные на напряжение свыше 1000 В. Общие технические условия

Status: Effective

This standard applies to ceramic reinforced supporting insulators for indoor and outdoor installation, designed to isolate and fix current-carrying parts in electrical devices, switchgears of power stations and substations, switchgear sets, alternating current conductors with voltage over 1000 V and frequencies up to 100 Hz, located at a height of up to 1000 m above sea level. This standard applies to both single-element supporting insulators and composite structures of rod-type insulators. This standard does not apply to pin type insulators.

Настоящий стандарт распространяется на керамические армированные опорные изоляторы наружной и внутренней установки, предназначенные для изоляции и крепления токоведущих частей в электрических аппаратах, распределительных устройствах электрических станций и подстанций, комплектных распределительных устройствах, токопроводах переменного тока напряжением свыше 1000 В частоты до 100 Гц, расположенных на высоте до 1000 м над уровнем моря. Настоящий стандарт распространяется как на одноэлементные опорные изоляторы, так и на составные конструкции из изоляторов стержневого типа. Настоящий стандарт не распространяется на изоляторы штыревого типа

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/18/2008

SKU: RUSS60264

Price: $240.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 29 Electrical Engineering »

ISO classifier » 29 ELECTRICAL ENGINEERING » 29.080 Insulation » 29.080.10 Insulators »

National standards » 29 ELECTRICAL ENGINEERING » 29.080 Insulation » 29.080.10 Insulators »

National Standards for KGS (State Standards Classification) » Latest edition » E Power and electrical equipment » E3 Electrical materials and insulators » E35 Insulators »


The Document is Replaced With:

GOST R 52034-2023: Ceramic and glass support insulators for voltage over 1000 V. General technical conditions

As a Replacement Of:

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications

GOST 1033-79: Fatty cup grease. Specifications

GOST 10390-86: Electrical equipment for voltages 3 kV and higher. Test methods of electric strength of external insulation in conditions of contamination

GOST 1131-76: Strained aluminium alloys in pigs. Technical requirements

GOST 12.2.007.3-75: Occupational safety standard system. Electrotechnical devices for voltage more than 1 000 v

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14192-96: Cargo marking

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 1516.2-97: Electrical equipment and installations for a.c. voltage 3 kV and higher. General methods of dielectric tests

GOST 1516.3-96: Electrical equipment for a.c. voltages from 1 to 750 kV. Requirements for dielectric strength of insulation

GOST 15543.1-89: Electrical articles. General requirements for environmental climatic aspects stability

GOST 1583-93: Aluminium casting alloys. Specifications

GOST 15846-2002: Production for transportation to the areas of Far North and similar regions. Packing, marking, transportation and storage

GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods

GOST 18321-73: Statistical quality control. Item random sampling methods

GOST 18620-86: Electrotechnical articles

GOST 20.57.406-81: Electrical equipment, devices for electronic technology and quantum electronics

GOST 20419-83: Ceramic electrotechnical materials

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 26093-84: Ceramic insulators. Test methods

GOST 26358-84: Pig iron castings

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 2697-83: Roofing asphalt felt. Specifications

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 481-80: Compressed asbestos fibre sheets and gaskets from it. Specifications

GOST 5244-79: Wood chips

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5862-79: Ceramic insulators and covers for voltage over 1000 V. General specifications

GOST 6267-74: Grease ЦИАТИМ-201. Specifications

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST 977-88: Steel castings. General specifications

GOST 9920-89: A.c. electrical installations for voltage from 3 to 750 kV. Creepage distance of external insulation

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52034-2003: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 9.316-2006: Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

The Document is Referenced By:

GOST R 55716-2013: High-voltage switchgear. General specifications

GOST R 58786-2019: Electrical equipment for nuclear power plants. General technical requirements

GOST R 59032.4-2020: Electricity transmission by direct current of high voltage. AC side harmonic filter specification and design guide. Part 4. Equipment

PNST 164-2016: Electric equipment for nuclear power plants. General technical requirements

SP 85.13330.2016: Overhead contact lines of electrified transport

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Clear sheet glass. Specifications
Language: English
Price: $250.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!