GOST R 53671-2009
ГОСТ Р 53671-2009
|
|
Pipeline valves. Swing and lift check valves. General specifications
Арматура трубопроводная. Затворы и клапаны обратные. Общие технические условия
Status: Not effective - Canceled. Information on the registration of 451st from 05/30/2016 (the official site of Rosstandart), see IUS 11-2016
This standard applies to check valves, check valves and valves that are non-return-shut and non-return-controlled for a nominal pressure of not more than PN 250, designed to operate on liquid and gaseous media. The standard does not apply to products from non-metallic materials. The standard can be used for certification
Настоящий стандарт распространяется на затворы обратные, клапаны обратные и клапаны невозвратно-запорные и невозвратно-управляемые на номинальное давление не более PN 250, предназначенные для работы на жидких и газообразных средах. Стандарт не распространяется на изделия из неметаллических материалов. Стандарт может быть использован для сертификации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/15/2009
SKU: RUSS60267
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
032/2013 TR CU. On safety of overpressure equipment »
Regulations and standards (to 032/2013 TR CU) »
Standards for pipe fittings (TPA) »
11. Piping valves (TPA) tests »
11.2 Basic test procedures »
Standards for pipe fittings (TPA) »
2. Standards for general specifications »
2.3 Reverse fittings »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipe fittings »
23.060.01 Pipe fittings in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.060 Pipeline valves »
23.060.01 Pipe fittings in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G18 Fittings and pipeline connections »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 10198-91: Wooden boxes for weights of mass over 200 up to 20000 kg. General specifications
GOST 10549-80: Screw thread runout. Washout threads, total thread runouts, undercuts and chamfers
GOST 112-78: Meteorological glass thermometers
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12112-78: Brown coals. Method for determination of petrographic composition
GOST 12815-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). Types. Connecting dimensions and dimensions of sealing surfaces
GOST 12816-80: Flanges for valves, fittings and pipelines for Pnom from 0,1 to 20 MPa (from 1 to 200 kgf/sq sm). General technical requirements
GOST 12817-80: Cast grey iron flanges for Pnom from 0,1 to 1,6 MPa (from 1 to 16 kgf/sq sm). Design and dimensions
GOST 12818-80: Cast malleable iron flanges for Pnom from 1,6 to 4,0 MPa (from 16 to 40 kgf/cm2). Design and dimensions
GOST 12819-80: Cast steel flanges for Pnom from 1,6 to 20,0 MPa (from 16 to 200 kgf/sq sm). Design and dimensions
GOST 12820-80: Steel plane welded flanges for Pnom from 0,1 to 2,5 MPa (from 1 to 25 kgf/cm2). Design and dimensions
GOST 12821-80: Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
GOST 13837-79: General purpose dynamometers
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16504-81: The state system of testing products. Product test and quality inspection. General terms and definitions
GOST 166-89: Vernier callipers. Specifications
GOST 17433-80: Industrial purity. Compressed air. Grades of contamination
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18322-78: Equipment maintenance and repair system. Terms and definitions
GOST 19112-78: Articles of paper and board. Technology. Terms and definitions
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 21752-76: Man-machine system Control hand wheels and steering wheels General ergonomic requirements
GOST 22445-88: Check valves. Basic parameters
GOST 24054-80: Engineering and instrument production items. Leak detection methods. General requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 24297-87: Input inspection of products. General provisions.
GOST 24642-81: Basic norms of interchangeability. Tolerances of form and position. Basic terms and definitions
GOST 24643-81: Basic norms of interchangeability. Tolerances of form and position of surfaces. Numerical values
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 26304-84: Industrial pipeline valves supplied
GOST 26349-84: Tube connections and fittings. Nominal pressures. Series
GOST 27.002-89: Industrial product dependability. General principles. Terms and definitions
GOST 27477-87: Non-return check valves. Basic parameters
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2822-78: Threaded ends of marine valves and fittings. Types, main characteristics and dimensions and technical requirements
GOST 29329-92: Balance for static weightings
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 30893.1-2002: Basic norms of interchangeability. General tolerances. Limit deviations for linear and angular dimensions without tolerance indications
GOST 30893.2-2002: Basic norms of interchangeability. General tolerances. Tolerances of form and position for features without individual tolerance indications
GOST 3242-79: Welded joints
GOST 3326-86: Stop valves, check lift and swing valves. Overall dimensions
GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5890-78: Pipe connection with screwed ends. Specifications
GOST 6359-75: Meteorological barographs of aneroid type. Specifications
GOST 6507-90: Micrometers. Specifications
GOST 6527-68: Female ends with pipe cylindrical thread. Dimensions
GOST 7062-90: Carbon and alloyed steel forgings fabricated by press forging. Allowances and tolerances
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7829-70: Carbon and alloyed steel forgings fabricated by hammer forging. Allowances and tolerances
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9012-59: Metals. Method of Brinell hardness measurement
GOST 9013-59: Metals. Method of measuring Rockwell hardness
GOST 9150-2002: Basic norms of interchangeability. Metric screw threads. Profile
GOST 9399-81: Threaded steel flanges for Pn 20-100 MPa (200-1000 kgf/sq sm). Specifications.
GOST 9544-2005: Pipeline gate valves. Classes and rates of gates sealibility
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 15.201-2000: System of product development and launching into manufacture. Products of industrial and technical designation. Procedure of product development and launching into manufacture
GOST R 52720-2007: Pipeline valves. Terms and definitions
GOST R 52760-2007: Pipeline valves. Requirements for the marking and distinctive painting
GOST R 53228-2008: Non-automatic weighing instruments. Part 1. Metrological and technical requirements. Tests
GOST R 53402-2009: Pipeline valves. Methods of control and testing
GOST R 53464-2009: Metal and alloy castings. Dimensions and mass tolerances and machining allowances
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 8.568-97: State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
GOST R ISO 8573-1-2005: Compressed air. Part 1. Contaminants and purity classes
MU 2.1.5.1183-03: Sanitary and Epidemiological Surveillance over the Water Use in Industrial Water Supply Systems
PB 03-585-03: Process Pipelines Design and Safe Operation Rules
PNAE G-7-008-89: Regulations for design and safe operation of equipment and piping of atomic power plants
PR 50.2.006-94: Procedure for calibration of measurement equipment
SanPiN 2.1.4.1074-01: Drinking water. Hygienic regulations of the water quality of centralized drinking water supply system. Quality control
ST TsKBA 028-2007: Pipe fittings. Periodic testing. General requirements
ST TsKBA 041-2008: Pipe fittings. Input control of materials, semi-finished products and components
The Document is Referenced By:
GOST 12.2.063-2015: Pipeline valves. General safety requirements
GOST 33257-2015: Pipeline valves. Methods of control and testing
GOST R 53672-2009: Pipeline valves. General safety requirements
GOST R 55018-2012: Pipeline valves for objects of energetics. General specifications
GOST R 56001-2014: Pipeline valves for objects of gas industry. General specifications
ST TsKBA 007-2004: Pipe fittings. Organizing and conducting an industrial safety review of pipeline valves operated at hazardous production facilities
TU 3742-011-34390194-2003: Check valves DN 100-1400 PN 8, 0 MPa; PN 12, 5 MPa; PN 16, 0 MPa. Technical conditions
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
