GOST 10674-82
ГОСТ 10674-82
|
|
Tank cars of 1520 mm gauge main-line railways. General specifications
Вагоны-цистерны магистральных железных дорог колеи 1520 мм. Общие технические условия
Status: Not effective - Canceled in the Russian Federation. Registration information 282-st dated 10/31/2000
The standard applies to tank wagons for the transport of liquid and gaseous products, molten substances and bulk materials, the physico-chemical properties of which allow them to be transported in the specified tanks.
Стандарт распространяется на вагоны-цистерныдля перевозки жидких и газообразных продуктов, расплавленных веществ и сыпучих материалов, физико-химические свойства которых позволяют перевозить их в указанных цистернах.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
3/17/1982
SKU: RUSS60350
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
45 Railway technology »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.14 Testing and monitoring of vehicles and equipment »
4.14.3 Railway and tram locomotives, rail rolling stock »
ISO classifier »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.20 Trailer »
National standards »
45 RAILWAY ENGINEERING »
45.060 Rolling stock of railways »
45.060.20 Trailer »
National Standards for KGS (State Standards Classification) »
Latest edition »
D Vehicles and packaging »
D5 Rail transport »
D52 Railway cars »
National Standards for OKSTU »
HEAVY, POWER AND TRANSPORTATION ENGINEERING PRODUCTS »
Mainline freight wagons »
The Document is Replaced With:
GOST 10674-97: Tank Car of 1520 mm gauge mainline railways. General technical conditions
As a Replacement Of:
GOST 10674-75: Tank rail wagons of trunk gauge railways 1520 (1524) mm. Technical requirements
The Document References:
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 14782-86: Nondestructive testing. Welded joints. Ultrasonic methods
GOST 15.001-88: System of product development and launching into manufacture. Products of industrial and technical designation
GOST 1510-84: Petroleum and petroleum products. Marking, packing, transportation and storage
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 1759.1-82: Bolts, screws, studs and nuts. Tolerance, monitoring methods of dimensions and deviations of shape and surface orientation
GOST 1759.3-83: Nuts. Surface defects and methods of control
GOST 19281-73: Low alloyed sorted and shaped steel
GOST 19282-73: Low-alloyed plate strip universal steel. Specifications
GOST 21130-75: Electrical articles. Grounding terminals and grounding signs
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
GOST 22780-93: Car axles for 1520 (1524) mm gauge main-line railways. Types, parameters and dimensions
GOST 25932-83: Portable radioisotope soil and concrete moisture and density gauges. General specifications
GOST 2593-82: Coupling air brake hoses for railway rolling stock. Specifications
GOST 26358-84: Pig iron castings
GOST 3191-93: Railway cars of 1520 mm track gauge. Parts of wood and wooden materials. General specifications
GOST 3242-79: Welded joints
GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions
GOST 3475-81: Automatic coupler equipment of railway rolling stock for railway track gauge 1520 (1524) mm. Assembling dimensions
GOST 380-71: Common quality carbon steel. Grades
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 4835-80: Car wheelsets of railways mainline, gauge 1520 (1524) mm. Specifications
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 610-72: Oils for axle journals. Specifications
GOST 6713-91: Low-alloyed structural rolled stock for bridge building. Specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 7505-89: Steel stamping forgings. Tolerances, allowances and forging laps
GOST 7512-82: Nondestructive testing. Welded joints. Radiography method
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8734-75: Seamless steel tubes cold deformed. Range
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9238-83: Construction and rolling stock clearance diagrams for the USSR railways of 1520 (1524) mm gauge.
GOST 9246-79: Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
GOST 977-88: Steel castings. General specifications
The Document is Referenced By:
GOST 10104-75: Technical 2, 4-dinitrotoluene. Specifications
GOST 10113-62: Cameline-seed oil (technical)
GOST 10205-73: Technical 2-aminotoluene. Specifications
GOST 10457-73: Auxiliary compounds for textiles. Glycasine. Specifications
GOST 10678-76: Thermal orthophosphoric acid. Specifications
GOST 10730-82: Auxiliary compounds for textiles. Preparation OC-20. Specifications
GOST 1128-75: Refined cotton-seed oil
GOST 1129-93: Sunflower oil
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 1304-76: Fish and marine mammals fats for industrial use. Specifications
GOST 13799-2016: Canned fruit, vegetable and mushroom produce. Packing, marking, transportation and storage
GOST 14231-88: Urea-formaldehyde resins. Specifications
GOST 1500-78: Witrous vitriol. Specification
GOST 18992-80: Polyvinyl acetate homopolymeric coarse breakup dispersion. Specifications
GOST 19652-89: Synthetic primary fatty alcohols, C7-C9 fractions. Specifications
GOST 24211-2003: Additives for concretes and mortars. General specifications
GOST 24211-2008: Admixtures for concretes and mortars. General specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 25226-96: Crushed stone and sand perlite for the production of expanded perlite. Technical conditions
GOST 25821-83: Fluid PGV. Specifications
GOST 26371-84: Ethyl silicate-40. Specifications
GOST 27952-88: Unsaturated polyester resins. Specifications
GOST 28471-90: Microbiological products. Packing, marking, transportation and storage
GOST 30306-95: Fruit stone and almond nut oil
GOST 30561-2013: Sugar beet molasses. Specifications
GOST 30561-2017: Beet molasses. Technical conditions
GOST 5728-76: Three-cresyl phosphate for industrial use. Specifications
GOST 5791-81: Technical linseed oil. Specifications
GOST 6732.3-89: Organic dyes, intermediates for dyes, auxiliary compounds for textiles. Packing
GOST 6757-96: Technical castor oil. Specifications
GOST 6823-2000: Crude natural glycerine. General specifications
GOST 6823-2017: Natural glycerin raw. General technical conditions
GOST 6823-77: Crude glycerine. Specifications
GOST 7197-73: Technical 4-nitrotoluol. Specifications
GOST 7630-96: Fish, marine mammals, marine invertebrates, algae and products of their processing. Labelling and packing
GOST 7825-76: Soy-bean oil. Specification
GOST 7825-96: Soybean oil
GOST 7981-68: Peanut oil
GOST 8728-88: Plasticizers. Specifications
GOST 8807-94: Mustard oil
GOST 8808-2000: Maize oil. Specifications
GOST 8808-91: Corn oil
GOST 8980-75: Auxiliary compounds for textiles. Stearox-6. Specifications
GOST 8988-2002: Rapeseed oil. Specifications
GOST 8988-77: Rapeseed oil
GOST 8989-73: Hempseed oil
GOST 8990-59: Sesame oil
GOST 901-78: Bakelite lacquers. Specifications
GOST 9393-82: Fish and marine mammals veterinary oil
GOST R 57249-2016: Enzyme preparations. Packing, marking, transportation and storage
OST 24.050.34-84: Wagon steel structures design and production. Specifications.
PMG 65-2003: State system for ensuring the uniformity of measurements. Rail tankers. General requirements for methods of verification by a volumetric method
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
TR 107-00: Technical recommendations on the use of water-repellent compositions
Customers Who Viewed This Item Also Viewed:
 |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English |
Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.