GOST 12365-84
ГОСТ 12365-84
|
|
Steels alloyed and highalloyed. Methods for the determination of zirconium
Стали легированные и высоколегированные. Методы определения циркония
Status: Effective. The limitation of the effectiveness period has been lifted: Protocol No. 4-93 of the IGU dated 10.21.93 (IUS 4-1994)
The standard establishes methods for the determination of organochlorine pesticides (hereinafter referred to as OCPs): DDT - 4,4'-dichlorodiphenyltrichloroethane and its metabolites: DDD - 4,4'-dichlorodiphenyldichloroethane and DDE - 4,4'-dichlorodiphenyldichloroethylene; HCH and its isomers: Lindane - gamma-hexachlorocyclohexane isomer, alpha - isomer of hexachlorocyclohexane, beta-isomer of hexachlorocyclohexane, hexachlorobenzene, heptachlor, aldrin and keltan TLC, high performance liquid chromatography and gas-liquid. The standard applies to water, food, feed and tobacco.
Стандарт устанавливает методы определения циркония: фотометрический прямой с реагентом ксиленовым оранжевым при массовой доле циркония от 0,10 до 1,0 % для сталей, не содержащих молибден и ниобий; фотометрический с реагентом арсеназо III при массовой доле циркония от 0,01 до 0,50 % с предварительным отделением циркония от мешающих элементов; гравиметрический фосфатный при массовой доле циркония от 0,10 до 1.0 %.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
1/19/1984
SKU: RUSS60553
National keywords: стали;
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V39 Test methods. Packaging. Marking »
National Standards for OKSTU »
CAST IRON, FERRO ALLOYS, STEEL »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 12365-66: Steels (alloyed and highly alloyed). Method for determination of zirconium content
The Document References:
GOST 10484-78: Reagents. Hydrofluoric acid. Specifications
GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications
GOST 10929-76: Reagents. Hydrogen peroxide. Specifications
GOST 11293-78: Edible gelatin. Specification
GOST 11293-89: Gelatin. Specifications
GOST 20560-81: Alloy and high-alloy steels. General requirements for methods of analysis
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3760-79: Reagents. Ammonia water. Specifications.
GOST 3761-65: Ammonium nitrate
GOST 3772-74: Reagents. Ammonium phosphate dibasic. Specifications
GOST 3773-72: Reagents. Ammonium chloride. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 4815-76: Ascorbic acid for food. Specification
GOST 5817-77: Reagents. Tartaric acid. Specifications
GOST 5857-79: N-Nitroso-N-phenyl hydroxylamine ammonium salt. Specification
GOST 7172-76: Reagents. Potassium pyrosulphate
GOST 83-79: Reagents. Sodium carbonate. Specifications
The Document is Referenced By:
GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications
GOST 10160-75: Magnetically soft precision alloys
GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets
GOST 11068-81: Electric-welded pipes from corrosion-resistant steel
GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel
GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel
GOST 12132-66: Electrowelded and seamless steel tubes for automotive and bicycle industries. Specifications
GOST 1215-79: Malleable iron castings
GOST 12766.1-90: High electrical resistant wire made of precision alloys
GOST 12766.2-90: Strip from precision high electric resistance alloys
GOST 12766.3-90: Precision gauged alloys of high electric resistance
GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance
GOST 12766.5-90: Flattened strip of high electric resistance precision alloys
GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 14162-79: Steel tubes of small dimensions (capillary)
GOST 18143-72: Corrosion resistant
GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel
GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.
GOST 2246-70: Welding steel wire. Specifications
GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications
GOST 23270-89: Tube-billets for machining
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 24182-80: Open-hearth steel rails, P75, P65 and P50 types for wide gauge railways. Specifications
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 2787-75: Recycled ferrous metals
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5058-65: Low-alloy constructional steel. Grades and general technical requirements
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-73: Bars and strips from a toolhouse steel alloy
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 800-78: Bearing tubes. Technical requirements
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 8733-87: Steel seamless cold-deformed and heat-deformed pipes. Technical specifications
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 9960-85: Point blade rails
GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures
GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure
GOST R 51045-97: Steel rails of PП50, PП65 and PП75 types for industrial tracks. General specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests
GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 56030-2014: Pipes for details of bearings. Technical specifications
GOST R 57587-2017: Products obtained by additive processes. Methods of control and testing
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PNAE G-7-010-89: Equipment and pipelines of nuclear energy facilities. Welded joints and beads. Testing rules
PNAE G-7-025-90: Steel castings for nuclear plants. Rules of control
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface
RD RTM 26-362-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of iron and steel
RD RTM 26-363-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of monel-metal alloy
RD RTM 26-364-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of basic elements in ferroalloys
RD RTM 26-365-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of welding fluxes and electrode coatings
RD RTM 26-366-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Spectral methods of steel analysis
RD RTM 38.14.006-86: Method for determining the service life of the coils of catalytic reforming furnaces that have worked out the project resource
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SP 101-34-96: Set of rules for construction of trunk pipelines (SPSMG). Code of practice for selection of pipes for the construction of trunk gas pipelines. RAO "Gazprom", 11/15/90
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
TU 14-3R-54-2001: Seamless hot deformed pipes made of steel grade 20YUCH. Technical conditions
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
Customers Who Viewed This Item Also Viewed:
|
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.