GOST 15527-2004

ГОСТ 15527-2004

Pressure treated copper zinc alloys (brasses). Grades

Сплавы медно-цинковые (латуни), обрабатываемые давлением. Марки

Status: Effective

The standard applies to copper-zinc alloys (brass), pressure treated. When designating brass, indicate the brand in accordance with this standard.

Стандарт распространяется на медно- цинковые сплавы (латуни), обрабатываемые давлением. При обозначении латуней следует указывать марку в соответствии с данным стандартом.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 10/25/2004

SKU: RUSS60561

Price: $185.00




The Product is Contained in the Following Classifiers:

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.1 Metals »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.3 Non-ferrous and precious metals »

ISO classifier » 77 METALLURGY » 77.120 Non-ferrous metals » 77.120.99 Other non-ferrous metals and their alloys »

National standards » 77 METALLURGY » 77.120 Non-ferrous metals » 77.120.99 Other non-ferrous metals and their alloys »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V5 Non-ferrous metals and their alloys. Rolled non-ferrous metals » V54 Tapes »


As a Replacement Of:

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

The Document References:

GOST 15527-70: Copper zinc pressure treated alloys (brasses). Types

GOST 1652.10-77: Copper-zinc alloys. Methods for the determination of aluminium

GOST 1652.11-77: Copper-zinc alloys. Methods for the determination of nickel

GOST 1652.12-77: Copper-zinc alloys. Methods for the determination of silicon

GOST 1652.13-77: Copper-zinc alloys. Methods for the determination of phosphorus

GOST 1652.1-77: Copper-zinc alloys. Methods for the determination of copper

GOST 1652.2-77: Copper-zinc alloys. Methods for the determination of lead

GOST 1652.3-77: Copper-zinc alloys. Methods for the determination of iron

GOST 1652.4-77: Copper-zinc alloys. Methods for the determination of manganese

GOST 1652.5-77: Copper-zinc alloys. Methods for the determination of tin

GOST 1652.6-77: Copper-zinc alloys. Methods for the determination of antimony

GOST 1652.7-77: Copper-zinc alloys. Methods for the determination of bismuth

GOST 1652.8-77: Copper-zinc alloys. Methods for the determination of arsenic

GOST 1652.9-77: Copper-zinc alloys. Methods for the determination of sulphur

GOST 24978-91: Copper-zinc alloys. Methods for determination of zinc

GOST 25086-87: Nonferrous metals and their alloys. General requirements for methods of analysis

GOST 9716.1-79: Copper-zinc alloys. Method of spectral analysis of metal standard specimens with photographic registration of spectrum

GOST 9716.2-79: Copper-zinc alloys. Method spectral analysis of metal standard specimens with photoelectric registration of spectrum

GOST 9716.3-79: Copper-zinc alloys. Method of spectral analysis of oxide specimens with photographic registration of spectrum

ST SEV 543-77: Numbers. Requirements for Notation and Rounding Off

The Document is Referenced By:

GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications

GOST 10304-80: Rivets

GOST 10505-76: Locked-coil hoisting steel wire ropes

GOST 1066-2015: Brass wire. Specifications

GOST 1077-79: Single-flame multi-purpose torches for oxy-acetylene welding, soldering and heating

GOST 11122-84: Hinge oil BНИИ НП-25. Specifications

GOST 11383-2016: Thin-walled copper and brass tubes. Specification

GOST 1147-80: Wood details and articles for one-two storey dwelling and public buildings

GOST 11614-2019: Semi-automatic flush taps. Technical specifications

GOST 11871-88: Slotted round nuts, product grade A. Specifications

GOST 12.2.052-81: Occupational safety standards system. Equipment working with gaseous oxygen. General safety requirements

GOST 12920-2013: Brass wire for cold upsetting

GOST 13932-80: Combined arbor-type circular mills for woodcutting

GOST 15062-2017: Seats for unitation. Specifications

GOST 15763-2005: Threaded and flange pipe connections for PN to 63 MPa (to 630 kgf/sq sm). General specifications

GOST 15763-91: Pipeline thread connections for Py up to 63 MPa (up to 630 kgf/cm2)

GOST 1652.10-77: Copper-zinc alloys. Methods for the determination of aluminium

GOST 1652.12-77: Copper-zinc alloys. Methods for the determination of silicon

GOST 1652.13-77: Copper-zinc alloys. Methods for the determination of phosphorus

GOST 1652.1-77: Copper-zinc alloys. Methods for the determination of copper

GOST 1652.2-77: Copper-zinc alloys. Methods for the determination of lead

GOST 1652.3-77: Copper-zinc alloys. Methods for the determination of iron

GOST 1652.4-77: Copper-zinc alloys. Methods for the determination of manganese

GOST 1652.5-77: Copper-zinc alloys. Methods for the determination of tin

GOST 1652.6-77: Copper-zinc alloys. Methods for the determination of antimony

GOST 1652.7-77: Copper-zinc alloys. Methods for the determination of bismuth

GOST 1652.8-77: Copper-zinc alloys. Methods for the determination of arsenic

GOST 1652.9-77: Copper-zinc alloys. Methods for the determination of sulphur

GOST 16775-93: Plain snap gauges with cemented carbide alloy plates for diameters from 3 to 180 mm. Dimensions

GOST 1759.0-87: Bolts, screws, studs and nuts. Specifications.

GOST 18064-2016: Solid carbide boring tools with steel shank. Specifications

GOST 18123-82: Washers

GOST 19681-2016: Sanitary and technical water fittings. General specifications

GOST 19703-79: Leaded brass wire type LS 63-3 specifications

GOST 2060-2006: Brass rods. Specifications

GOST 2060-90: Brass rods. Specifications

GOST 20707-2015: Copper and brass ribbons for radiators. Specifications

GOST 20707-80: Copper and brass ribbons for radiators. Specifications

GOST 20862-81: Adjusting fixturing hexahedral supports with threaded end and hole. Design and dimensions

GOST 20863-81: Adjusting fixturing rings supports with a flat, threaded end and hole. Design and dimensions

GOST 20864-81: Adjusting fixturing ring supports with slit, threaded end and hole. Design and dimensions

GOST 20865-81: Adjusting fixturing hexahedral supports with threaded holes. Design and dimensions

GOST 20866-81: Adjusting fixturing ring support with flats and threaded holes. Design and dimensions

GOST 20867-81: Adjusting fixturing ring with a slit and threaded holes. Design and dimensions

GOST 20900-2014: Copper tubing for waveguides and brass right angle tubes. Specifications

GOST 20944-75: Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity

GOST 21646-2003: Copper and brass tubes for heat-exchange apparatus. Specifications

GOST 2171-90: Pieces, products, semi-finished products and billets of non-ferrous metals and alloys. Grade designation

GOST 21804-94: Shut-Off Devices for Cylinders With Liquefied Hydrocarbon Gases With Pressure Up To 1.6 Mpa

GOST 2187-79: Diving weights. Specifications

GOST 2205-2016: L-90 tapes and strips for plating. Specifications

GOST 2205-71: L-90 tapes and strips for plating. Specifications

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 2208-91: Brass strips for general use. Specifications

GOST 23289-2016: Waste water drain sanitary accessories. Specification

GOST 23932-90: Laboratory glassware and equipment. General specifications

GOST 24308-2018: Utensils of copper-nickel alloy, german silver and brass with chrome or nickel coating. General specifications

GOST 24308-80: Utensils of copper-nickel alloy, nickel silver and brass with chrome or nickel coating

GOST 24320-2018: Utensils and covers of copper-nickel and copper-nickel-zinc alloys with silver or gold coating. General specifications

GOST 24320-80: Tableware made of cupronickel and nickel silver coated with silver or gold

GOST 24360-2016: Shell and mills with inserted carbide teeth. Specifications

GOST 25377-2015: Needles for injections for repeated use. Specifications

GOST 25377-82: Syringe needles for repeated use

GOST 2622-2016: Manometric tubes made of bronze БрОФ4-0,25 and brass Л63. Specifications

GOST 2624-2016: Copper and brass capillary tubes. Specification

GOST 2624-77: Copper and brass capillary tubes

GOST 2712-75: Grease АМС. Specifications

GOST 28873-90: Alloys on the basis of heavy non-ferrous metals treated under pressure. Unified grades

GOST 2936-2016: Planc-oval scamless radiator tubes. Specifications

GOST 2936-75: Plane-oval seamless radiator tubes

GOST 30815-2019: Automatic thermostats of heating devices for water heating systems in buildings. General specifications

GOST 31311-2005: Heating devices. General specifications

GOST 31366-2008: Brass rods for free machining purposes. Specifications

GOST 32583-2013: Stainless steel table and kitchen cutlery. General specifications

GOST 32590-2013: Fittings of copper and copper alloys with ends for capillary soldering or capillary brazing to copper tubes. Specifications

GOST 33136-2014: Automobile roads of general use. Viscous petroleum road bitumens. Method for determination of depth of penetrometer needle penetratio

GOST 33142-2014: Public roads. Bitumen of petroleum viscous for road building. Method for determination of the softening point. The method "ring and ball"

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 33341-2015: All-season antifreeze compositions and liquid coolants for heat-exchange systems. Specifications

GOST 34294-2017: Cryogenic pipeline valves. General specifications

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34609-2019: Ball valves and taps with cone closing element with manual control for gas installations in buildings

GOST 34697-2020: End and release valves. General specifications

GOST 34708-2021: Pipe fittings. Sealing materials based on thermally expanded graphite. General specifications

GOST 356-80: Valves and details for piping. Pressures conditional, test and operational. Lines.

GOST 397-79: Split pins

GOST 400-80: Glass thermometers for testing of petroleum products. Specifications

GOST 4285-79: Blow-off connection for 19 mm diameter air hoses. Specifications

GOST 4442-2014: Bands and strips of lead brass. Specifications

GOST 494-2014: Brass tubes. Specifications

GOST 494-90: Pipes of brass

GOST 529-2015: Radiator tubes. Specifications

GOST 5808-77: Half-side and side-and-face milling cutters with inserted carbide blades. Techical specifications

GOST 617-2006: General-purpose copper and brass tubes of round section. Specifications

GOST 617-90: Copper tubes. Specifications

GOST 6396-78: Carbide-tipped keyway milling cutters. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 6688-2016: Brass bars of rectangular section. Specifications

GOST 6688-91: Brass bars of rectangular section. Specifications

GOST 7199-77: Rubber-metallic ship bearings. Specifications

GOST 8036-2013: Strips of brass Л90. Specifications

GOST 931-90: Brass sheets and strips. Specifications

GOST EN 28839-2015: Mechanical properties of fasteners – bolts, screws, studs and nuts made of non-ferrous metals

GOST R 51687-2000: Stainless steel table and kitchen cutlery. General specifications

GOST R 52209-2004: Hose assemblies for gas burners and gas appliances. General technical requirements and test methods

GOST R 52597-2006: Brass rods for free machining purposes. Specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52922-2008: Fittings from copper and copper alloys for capillary soldering to copper tubes. Specifications

GOST R 53278-2009: Fire equipment. Fire valves. General technical requirements. Test methods

GOST R 53325-2012: Fire techniques. Means of fire automatics. General technical requirements and test methods

GOST R 53439-2009: Brass wire for cold upsetting. Specifications

GOST R 53499-2009: Tombac strips. Specifications

GOST R 53617-2009: Carbon brushes for electrical machines. Construction. Types and dimensions

GOST R 54152-2010: Tapes and strips from Л90 brass for plating. Specifications

GOST R 54158-2010: Thin-walled tubes from copper and copper alloys. Specifications

GOST R 54564-2011: Non-ferrous metals and alloys scarp and waste. General specifications

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55472-2013: Gas distribution systems. Requirements for gas distribution networks. Part 0. General

GOST R 55472-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 0. General

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 55601-2013: Heat exchanger apparatuses and air cooling apparatuses. Tube expanding in tube-sheets. General technical requirements

GOST R 56177-2014: Controlled door closing devices (door closers). Specifications

GOST R 58872-2020: Marine cable lugs with flat clamping part for conductors up to 16 mm2. Technical requirements

GOST R ISO 8839-2009: Mechanical properties of fasteners - bolts, screws, studs and nuts made of non-ferrous metals

ODM 218.7.002-2008: Guidelines for determining the needle penetration depth for viscous oil road bitumen

ODM 218.7.004-2008: Recommendations for the method of determining the softening temperature of viscous oil road bitumen on the ring and ball

OST 26-01-82-77: Welding in chemical mechanical engineering. Main provisions and technology.

OST 26-17-01-83: Heat exchangers and standard air cooling devices. Technical requirements to a bead forming with torque limiting.

OST 4 G0.033.200: Solders and fluxes for soldering, solder pastes. Brands, composition, properties and scope (edition 1-78)

PB 03-576-03: Regulations of design and safe operation of pressure vessels

PNST 3-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of needle penetration

PNST 375-2019: Gas cylinders. Technical Requirements and Testing of Automatic Gas Shut-Off Valves for LPG Cylinders

PNST 4-2012: Automobile roads of general use. Viscous petroleum road bitumens. Determination of the softening point. Ring and Ball method

RD 26-07-274-89: Pipe fittings. Rings brass for gray iron gate valves on Ru to 1.0 MPa (10 kgf

RMD 23-16-2012 Sankt-Peterburg: Recommendations for energy efficiency in residential and public buildings

SP 23-101-2004: Design of thermal protection of buildings

ST RK 2468-2014: Hydraulic oil AUP. Specifications.

ST TsKBA 002-2003: Pipe fittings. Latches. The method of force calculation

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

ST TsKBA 005.3-2004: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 005.3-2009: Pipe fittings. Metals used in the valve industry. Part 3. Foreign materials and their domestic counterparts

ST TsKBA 012-2005: Pipe fittings. Studs, bolts, nuts and washers for pipe fittings. Technical requirements

ST TsKBA 027-2006: Pipe fittings. Heat treatment of parts from non-ferrous alloys based on copper and nickel. Typical process

ST TsKBA 037-2006: Pipe fittings. Packing glands. Construction, main dimensions and technical requirements

ST TsKBA 060-2008: Pipe fittings. Running threaded pairs. Main dimensions, technical requirements

ST TsKBA 068-2008: Pipe fittings. Shut-off valves with metal-to-metal seal. Technical requirements

ST TsKBA 075-2009: Pipe fittings. Preparation of graphite grease

ST TsKBA 076-2009: Pipe fittings. Distinctive signs. Types, sizes and specifications

TU 26-02-1105-89: Shell and tube heat exchangers with fixed tube sheets and shell and tube with a temperature compensator on the shell with a shell diameter of 159, 273, 325, 426 mm increased thermal efficiency. Technical conditions

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 3612-024-00220302-02: Shell and tube heat exchangers with fixed tube sheets and shell and tube with temperature compensator on the shell

Customers Who Viewed This Item Also Viewed:

Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Blanks for marine shafts and rudder stocks. Specifications
Language: English
Price: $216.00
Tempered glass. Specifications.
Language: English
Price: $149.00
Glass with low emissivity hard coating. Specifications.
Language: English
Price: $212.00
Glass laminated. Specifications.
Language: English
Price: $231.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!