GOST 27473-87
ГОСТ 27473-87
|
|
Method for determining the comparative and the proof tracking indices of solid insulating materials under moist conditions
Материалы электроизоляционные твердые. Метод определения сравнительного и контрольного индексов трекингостойкости во влажной среде
Status: Effective - Introduced for the first time. IUS 2-1988 The limitation of effectiveness period has been lifted: Protocol No. 3-93 of the IGU dated 03/12/93 (IUS 5-6-1993)
This test method allows to determine the relative resistance of solid insulating materials to the formation of conductive bridges at voltages up to 600 V inclusive, when the material surface under voltage is exposed to the effects containing pollutants
Данный метод испытания позволяет определить относительное сопротивление твердых электроизоляционных материалов образованию токопроводящих мостиков при напряжениях до 600 В включительно, когда поверхность материала, находящаяся под напряжением, подвержена воздействию, содержащей загрязнители
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/17/1987
SKU: RUSS60641
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
29 Electrical Engineering »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.035 Insulation Materials »
29.035.01 Insulation materials in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.035 Insulation Materials »
29.035.01 Insulation materials in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
E Power and electrical equipment »
E3 Electrical materials and insulators »
E39 Test methods. Packaging. Marking »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Control methods (testing, analysis, measurements) »
National Standards for OKSTU »
ELECTRICAL EQUIPMENT AND MATERIALS »
Electrical insulating materials and products (except for micanites, micas and micas) »
The Document References:
GOST 27474-87: Test methods for evaluating resistance to tracking and erosion of electrical insulating materials used under severe ambient conditions
The Document is Referenced By:
GOST 10007-80: Polytetrafluoroethylene. Specifications
GOST 12.2.091-2002: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 12.2.091-2012: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST 12851-87: Polystyrene filaments. Specifications
GOST 12998-85: Polystyrene film. Specifications
GOST 21000-81: Non-strengthened and strengthened fluoroplast sheets laminated with foil. Specifications
GOST 24234-80: Polyethylene terephtalate film (polyester film). Specifications
GOST 26246.0-89: Foil-clad electrical insulating materials for manufacture of printed plates. Test methods
GOST 27570.01-92: Safety of electrically heated blankets, pads and similar flexible heating appliances for household use. Requirements and test methods
GOST 27905.2-88: Electrical insulation systems. Evaluation of performances evaluation, ageing mechanism, diagnostic procedures
GOST 28804-90: Moulding phenol materials. General specifications
GOST 30011.1-2012: Low-voltage switchgear and control gear. Part 1. General rules
GOST 30011.4.1-96: Low-voltage switchgear and control gear. Part 4. Contactors and motor-starters. Section 1. Electromechanical contactors and motor-starters
GOST 30011.6.1-2012: Distribution and control equipment low voltage. Part 6. Multifunctional equipment. Section 1. Switching equipment for automatic switching
GOST 30095-93: Polyester moulding materials (premixes). General specifications
GOST 30206-94: Alternating current static watt-hour meters for active energy ( accuracy classes 0,2 S and 0,5 S)
GOST 30207-94: Alternating current static watt-hour meters for active energy (accuracy classes 1 and 2)
GOST 30324.0-95: Medical electrical equipment. Part 1. General safety requirements
GOST 30326-95: Safety of information technology equipment included electrical business equipment
GOST 30345.0-95: Safety of household and similar electrical appliances. General requirements
GOST 30849.1-2002: Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements
GOST 30850.1-2002: Switches for household or similar stationary electrical facilities. Part 1 General requirements and test methods.
GOST 30850.2.1-2002: Switches for household or similar stationary electrical facilities. Parts 2-1. Additional requirements to semiconductor switches and testing methods.
GOST 30851.1-2002: Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB'S). Part 1. General rules
GOST 30852.10-2002: Electrical apparatus for explosive gas atmospheres. Part 11. Intrinsic safety i
GOST 30852.14-2002: Electrical apparatus for explosive gas atmospheres. Part 15. Type of protection n
GOST 30852.20-2002: Mininq electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and test methods
GOST 30852.3-2002: Explosionproof electrical equipment. Part 2. Filling or purging of the pressurized enclosure «p»
GOST 30852.8-2002: Explosionproof electrical apparatus. Part 7. Type of protection e
GOST 31195.1-2012: Connecting devices for low-voltage circuits for household and similar purposes. Part 1. General requirements
GOST 31223-2012: Cable reels for household and similar purposes. General requirements and test methods
GOST 31603-2012: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST 31610.11-2012: Electric equipment for explosive atmospheres. Part 11. Equipment protection by intrinsic safety «i»
GOST 31610.11-2014: Explosive atmospheres. Part 1.1. The equipment with type of Ex-protection "intrinsically safe power circuit "i"
GOST 31610.15-2012: Electrical apparatus for explosive gas atmospheres. Part 15. Construction, test and marking of type of protection «n» electrical apparatus
GOST 31610.15-2014: Explosive atmospheres. Part 15. Equipment with type of protection
GOST 31610.7-2012: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety «e»
GOST 32126.1-2013: Boxes and enclosures for electrical accessories for household and similsr fixed electrical installations. Part 1. General requirements
GOST 33323-2015: Power convertors railway rolling stock. Characteristics and test methods
GOST 33693-2015: Plastics. Test specimens
GOST 33798.1-2016: Electric equipment for rolling stock. Part 1. General service conditions and general rules
GOST 34362.2-2017: Plastics Thermoplastic polyester based elastomers
GOST 34367.1-2017: Plastics Collection and presentation of comparable numerical data on the properties of molding materials
GOST 34376.2-2017: Plastics. Thermoplastic polyurethanes for moulding and extrusion. Part 2. Preparation of test specimens and determination of properties
GOST 34452-2018: Disconnectors for the traction network of railways and their drives. General specifications
GOST 7397.0-89: Switches for household and similar stationary electric devices
GOST IEC 60079-1-2011: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST IEC 60079-1-2013: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures «d»
GOST IEC 60079-2-2013: Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure «p»
GOST IEC 60127-6-2013: Miniature fuses. Part 6. Fuse-holders for miniature fuse-links
GOST IEC 60252-1-2011: AC motor capacitors. Part 1. General. Performance, testing and rating. Safety requirements. Guidance for installation and operation
GOST IEC 60252-2-2011: AC motor capacitors. Part 2. Motor start capacitors
GOST IEC 60255-5-2014: Electrical relays. Part 5. Insulation coordination for measuring relays and protection equipment. Requirements and tests
GOST IEC 60320-1-2021: Instrument connectors for household and similar purposes. Part 1. General requirements
GOST IEC 60670-1-2016: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 1. General requirements
GOST IEC 60691-2017: Thermal-links. Requirements and application guide
GOST IEC 60730-1-2011: Automatic electrical controls for household and similar use. Part 1. General requirements
GOST IEC 60838-1-2011: Miscellaneous lamp holders. Part 1. General requirements and tests
GOST IEC 60884-1-2013: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests
GOST IEC 60920-2012: Ballasts for tubular fluorescent lamps. General and safety requirements
GOST IEC 60922-2002: Devices for lamps. Ballasts for discharge lamps (except tubular fluorescent lamps). General and safety requirements
GOST IEC 60922-2012: Auxiliaries for lamps. Ballasts for discharge lamps (excluding tubular fluorescent lamps). General and safety requirements
GOST IEC 60926-2012: Auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
GOST IEC 60928-2012: Auxiliaries for lamps. A.C. supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
GOST IEC 60947-1-2014: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60947-1-2017: Low-voltage distribution and control equipment. Part 1. General rules
GOST IEC 60950-1-2011: Information technology equipment. Safety. Part 1. General requirements
GOST IEC 60950-1-2014: Information technology equipment. Safety. Part 1. General requirements
GOST IEC 61009-1-2014: Switches, automatic, triggered by residual current, with built-in protection against overcurrent, household and similar purposes. Part 1. General rules
GOST IEC 61050-2011: Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon - transformers). General and safety requirements
GOST IEC 61095-2015: Electromechanical contactors for household and similar purposes
GOST IEC 61184-2011: Bayonet lamp holders
GOST IEC 61347-1-2019: Control gear for lamps. Part 1. General and safety requirements
GOST IEC 61535-2015: Mounting connectors for permanent connection in stationary installations
GOST IEC 61558-1-2012: Safety of power transformers, power supplies, reactors and similar products. Part 1. General requirements and tests
GOST IEC 61643-11-2013: Low-voltage surge protective devices. Part 11. Surge protective devices connected to low-voltage power systems. Requirements and test methods
GOST IEC 61730-1-2019: Photovoltaic modules. Safety assessment. Part 1. Design requirements
GOST IEC 61810-1-2013: Electromechanical elementary relays. Part 1. General requirements
GOST IEC 61812-1-2007: Time relay for industrial use. Part 1. Technical requirements and test methods
GOST IEC 61812-1-2013: Specified time relays for industrial use. Part 1. Requirements and tests
GOST IEC 61995-1-2013: Devices for the connection of luminaires for household and similar purposes. Part 1. Particular requirements for twist-on connecting devices
GOST IEC 61995-1-2017: Devices for connecting fixtures for household and similar purposes. Part 1. General requirements
GOST IEC 62019-2016: Electrical accessories. Circuit-breakers and similar equipment for household use. Auxiliary contact units
GOST MEK 60238-2002: Screwed lamp-holder
GOST MEK 60335-1-2008: Household and similar electrical appliances. Safety. Part 1. General requirements
GOST MEK 730-1-95: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R 1.7-2008: Standardization in the Russian Federation. National standards of the Russian Federation. Rules of presentation and indication by development on the basis of application of international standards
GOST R 50030.1-2000: Low-voltage switchgear and controlgear. Part 1. General rules and test methods
GOST R 50030.1-2007: Low-voltage switchgear and controlgear. Part 1. General rules
GOST R 50030.1-92: Low-voltage switchgear and control gear. Part 1. General rules
GOST R 50030.2-2010: Low-voltage switchgear and control gear. Part 2. Circuit-breakers
GOST R 50030.2-99: Low-voltage switchgear and controlgear. Part 2. Circuit-breakers
GOST R 50030.4.1-2002: Low-voltage switchgear and controlgear. Part 4-1. Contactors and motor-starters. Electromechanical contactors and motor-starters
GOST R 50030.5.1-2005: Low-voltage switchgear and controlgear. Part 5. Control circuit devices and switching elements. Section 1. Electromechanical control circuit devices
GOST R 50030.6.1-99: Low-voltage switchgear and controlgear. Part 6. Multiple function equipment. Section one. Аutomatic transfer switching equipment
GOST R 50031-99: Circuit-breakers for equipment (CBE)
GOST R 50043.1-92: Connecting devices for low voltage circuits for household and similar purposes. Part 1. General requirements
GOST R 50267.0-92: Medical electrical equipment. Part 1. General safety requirements
GOST R 50345-2010: Electrical accessories. Circuit-breakers for overcurrent protection for household and similar installations. Part 2. Circuit-breakers for a.c. operation
GOST R 50514-93: Electrical relays. Insulation test
GOST R 50827.1-2009: Boxes and enclosures for electrical accessories for household and similar fixed electrical installations. Part 1. General requirements
GOST R 51180-98: Electrical insulating materials. Safety requirements and test methods
GOST R 51321.1-2000: Low-voltage switchgear and controlgear assemblies. Part 1. Requirements for type-tested and partially type-tested assemblies. General technical requirements and methods of tests
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51322.1-2011: Plugs and socket-outlets for household and similar purposes. Part 1. General requirements and methods of tests
GOST R 51322.1-99: Plugs and socket-outlets for household and similar purposes. Part 1. Requirements and methods of tests
GOST R 51323.1-99: Plugs, socket-outlets and couplers for industrial purposes. Part 1. General requirements
GOST R 51324.1-2005: Switches for household and similar fixed electrical installations. General requirements and tests methods
GOST R 51324.1-2012: Switches for household and similar fixed electrical installations. Part 1. General requirements
GOST R 51324.1-99: Switches for household and similar fixed electrical installations. Part 1. General specifications and methods of tests
GOST R 51324.2.1-2012: Switches for household and similar fixed electrical installations. Part 2-1. Particular requirements. Electronic switches
GOST R 51324.2.1-99: Switches for household and similar fixed electrical installations. Part 2-1. Particular requirements for electronic switches and test methods
GOST R 51324.2.2-2012: Switches for household and similar fixed electrical installations. Part 2-2. Particular requirements for remote-control switches (RCS)
GOST R 51324.2.3-2012: Switches for household and similar fixed electrical installations. Part 2-3. Particular requirements for time-delay switches (TDS)
GOST R 51325.1-99: Appliance couplers for household and similar general purposes. Requirements and methods of tests
GOST R 51325.2.3-2013: Appliance couplers for household and similar general purposes. Part 2-3. Appliance couplers with a degree protection higher then IPX0
GOST R 51327.1-2010: Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBOs). Part 1. General rules and test methods
GOST R 51328-99: Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs). General requirements and test methods
GOST R 51330.10-99: Electrical apparatus for explosive gas atmospheres. Part 11. Spark-free power line, type i
GOST R 51330.14-99: Electrical apparatus for explosive gas atmospheres. Part 15. N type protection.
GOST R 51330.20-99: Mining electrical equipment. Insulation, leakage paths and electrical gaps. Technical requirements and testing methods
GOST R 51330.3-99: Explosion protected electrical equipment. Part 2. Filling or purging of the pressurized enclosure P
GOST R 51330.8-99: Explosionproof electrical apparatus. Part 7. Type e protection.
GOST R 51350-99: Safety requirements for electrical equipment for measurement, control, and laboratory use. Part 1. General requirements
GOST R 51539-99: Cable reels for household and similar purposes. General requirements and test methods
GOST R 51731-2001: Electromechanical contactors for household and similar purposes
GOST R 51731-2010: Electromechanical contactors for household and similar purposes
GOST R 51841-2001: Programmable controllers. General technical requirements and test methods
GOST R 51992-2002: Surge protective devices connected to low-voltage power distribution systems. Part 1. Performance requirements and testing methods
GOST R 51992-2011: Low-voltage surge protective devices. Part 1. Surge protective devices connected to low-voltage power distribution systems. Technical requirements and test methods
GOST R 52065-2003: Miner's explosion protected caplights. Part 1. General requirements and test methods
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
GOST R 52319-2005: Safety requirements for electrical equipment for measurement, control and laboratory use. Part 1. General requirements
GOST R 52350.11-2005: Electric equipment for explosive atmospheres. Part 11. Equipment protection by intrinsic safety «i»
GOST R 52350.1-2005: Electrical apparatus for explosive gas atmospheres. Part 1. Flameproof enclosures 'd'
GOST R 52350.15-2005: Electrical apparatus for explosive gas atmospheres. Part 15. Construction, tests and marking of type of protection "n" electrical apparatus
GOST R 52350.2-2006: Electrical apparatus for explosive gas atmospheres. Part 2. Pressurized enclosures 'р'
GOST R 52350.7-2005: Electrical apparatus for explosive gas atmospheres. Part 7. Increased safety 'e'
GOST R 53312-2009: Devices of protective shutdown. Fire safety requirements. Test methods
GOST R 53314-2009: Electronic products. Fire safety requirements. Test methods
GOST R 53317-2009: Devices and devices of the electrical protection system against fire hazardous modes in electrical networks of residential and public buildings. Fire safety requirements. Test methods
GOST R 53319-2009: Electric heaters for domestic use. Fire safety requirements. Test methods
GOST R 54800-2011: Power convertors railway rolling stock. Characteristics and test methods
GOST R 55210-2012: Insulation coordination for equipment within low-voltage systems. Part 2-1. Application guide. Explanation of the application of the IEC 60664 series. Dimensioning examples and dielectric testing
GOST R 55882.1-2013: Electric equipment for rolling stock. Part 1. General service conditions and general rules
GOST R 55883-2013: Disconnections for railways traction network and operating mechanisms for them. General specifications
GOST R 57230-2016: Photovoltaic systems. Connectors for DC-application. Classification, requirements and test methods
GOST R IEC 127-6-99: Miniature fuses. Part 6. Fuse-holders for miniature cartridge fuse-links
GOST R IEC 335-1-94: Safety of household and similar electrical appliances. General requirements and test methods
GOST R IEC 60065-2002: Audio-, video- and similar electronic apparatus. Safety requirements
GOST R IEC 60065-2005: Audio, video and similar electronic apparatus. Safety requirements
GOST R IEC 60079-1-2008: Explosive atmospheres. Part 1. Equipment protection by flameproof enclosures 'd'
GOST R IEC 60079-15-2010: Explosive atmospheres. Part 15. Equipment protection by type of protection «n»
GOST R IEC 60079-2-2009: Explosive atmospheres. Part 2. Equipment protection by pressurized enclosure 'p'
GOST R IEC 60079-7-2012: Explosive atmospheres. Part 7. Equipment. Protection by increased safety «e»
GOST R IEC 60238-99: Edison screw lampholders
GOST R IEC 60252-1-2005: AC motor capacitors. Part 1. General. Performance, testing and rating. Safety requirements. Guide for installation and operation
GOST R IEC 60252-2-2008: AC motor capacitors. Part 2. Motor start capacitors
GOST R IEC 60400-99: Lampholders for tubular fluorescent lamps and starter holders
GOST R IEC 60598-1-2003: Luminaires. Part 1. General requirements and test methods
GOST R IEC 60598-1-2011: Luminaires. Part 1. General requirements and test methods
GOST R IEC 60598-1-99: Luminaires. Part 1. General requirements and tests
GOST R IEC 60601-1-2010: Medical electrical equipment. Part 1. General requirements for basic safety and essential performance (IEC 60601-1:1988, IEC 60601-2-17(2004))
GOST R IEC 60664.1-2012: Insulation coordination for equipment within low-voltage systems. Part 1. Principles, requirements and tests
GOST R IEC 60730-1-2002: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R IEC 60838-1-2008: Miscellaneous lampholders. Part 1. General requirements and test methods
GOST R IEC 60893-2-2023: Materials for electrical insulation. Industrial rigid laminated sheet materials based on thermosetting resins for electrical applications. Part 2. Test methods
GOST R IEC 60922-98: Auxiliaries for lamps-ballasts for discharge lamps (excluding tubular fluorescent lamps) - general and safety requirements
GOST R IEC 60950-1-2005: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-1-2009: Information technology equipment. Safety. Part 1. General requirements
GOST R IEC 60950-2002: Safety of information technology equipment
GOST R IEC 60974-1-2004: Arc welding power sources. Safety requirements
GOST R IEC 61050-99: Transformers for tubular discharge lamps having a no-load output voltage exceeding 1000 V (generally called neon-transformers). General and safety requirements
GOST R IEC 61058.1-2000: Switches for electrical appliances. Part 1. General requirements and test methods
GOST R IEC 61184-99: Bayonet lampholders
GOST R IEC 61189-1-2012: Test methods for electrical materials, interconnection structures and assemblies. Part 1. General test methods and methodology
GOST R IEC 61249-2-4-2012: Materials for printed boards and other interconnecting structures. Part 2-4. Reinforced base materials, clad and unclad. Polyester non-woven/woven fibreglass laminated sheet of defined flammability (vertical burning test), copper-clad
GOST R IEC 61534.1-2014: Powertrack systems. Part 1. General requirements
GOST R IEC 62196-1-2013: Plugs, socket-outlets, vehicle connectors and vehicle inlets. Conductive charging of electric vehicles. Part 1. General requirements
GOST R IEC 730-1-94: Automatic electrical controls for household and similar use. General requirements and test methods
GOST R IEC 893-3-2-2002: Industrial rigid laminated sheets. Requirements for rigid laminated sheets based on epoxide resins. Specifications
GOST R IEC 920-97: Ballasts for tubular fluorescent lamps. General and safety requirements
GOST R IEC 926-98: Auxiliaries for lamps. Starting devices (other than glow starters). General and safety requirements
GOST R IEC 928-98: Auxiliaries for lamps. A.c.-supplied electronic ballasts for tubular fluorescent lamps. General and safety requirements
NPB 235-97: Electroheating devices for household application. Requirements of fire safety and test methods
NPB 243-97*: Residual current devices. Fire safety requirements. Test methods
NPB 247-97: Elektronical products. Requirements fire safety. Test metods
NPB 249-97: Luminaries. Requirements of fire safety. Test methods
ST RK IEC 60077-1-2007: Rolling stock of railways; electrical equipment for rolling stock. Part 1. General requirements. Introduced for the first time
STB IEC 60065-2004: Audio, video and similar electronic equipment. Safety requirements
STB IEC 60252-1-2007: Capacitors for AC motors. Part 1. General provisions, performance, testing and rating. Safety requirements. Installation and Operating Manual
STB IEC 60252-2-2007: Capacitors for alternating current motors. Part 2.Launching motor capacitors
STB IEC 60950-1-2003: Information technologies equipment. Safety. Part 1. General requirements
STB IEC 61558-1-2007: Safety of power transformers, power sources, electric reactors and similar appliances. Part 1. General requirements and test methods
STB IEC 61812-1-2004: Time relay for industrial use. Part 1. Technical requirements and tests
|
Customers Who Viewed This Item Also Viewed:
 |
Liquids for aircrafts systems. Method for determination thermo oxidizing stability and corrosion activity
Language: English |
Plastics structured-wall pipes and their fittings for sewerage systems outside the buildings. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
