GOST 31424-2010
ГОСТ 31424-2010
|
|
Non-metallic construction materials from sifting of crusting solid stone in aggregate manufacturing. Specifications
Материалы строительные нерудные от отсевов дробления плотных горных пород при производстве щебня. Технические условия
Status: Effective - Introduced for the first time
This standard applies to non-metallic building materials from crushing screenings obtained in the production of crushed rock from dense rock, gravel and boulders. Materials from crushing screenings are used in accordance with existing regulatory or technical documents as aggregates and fillers for concrete, mortar, dry mortar, for the production of roofing, ceramic materials, for preparing mixtures for the construction of foundations and road surfaces and airfields. Materials from crushing screenings and crushing screenings can be used in various types of construction work, including land reclamation, planning and land improvement.
Настоящий стандарт распространяется на строительные нерудные материалы из отсевов дробления, получаемые при производстве щебня из плотных скальных горных пород, гравия и валунов. Материалы из отсевов дробления применяют в соответствии с действующими нормативными или техническими документами в качестве заполнителей и наполнителей для бетонов, строительных растворов, сухих строительных смесей, для производства кровельных, керамических материалов, приготовления смесей при устройстве оснований и покрытий автомобильных дорог и аэродромов. Материалы из отсевов дробления и отсевы дробления могут быть использованы в различных видах строительных работ, в том числе для рекультивации земель, планировочных работ и благоустройства территорий
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
2/16/2011
SKU: RUSS60672
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
6. Regulatory documents for building materials and products »
K.63 Crushed stone, gravel and sand for construction work »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.1 Testing and control of products of mining and non-metallic industry »
4.1.2 Non-metallic minerals, materials and products »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.100 Building Materials »
91.100.15 Mineral materials and products »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh1 Construction materials »
Zh17 Inorganic and organic fillers »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 10923-93: Ruberoid. Specifications
GOST 14791-79: Sealing non-hardening
GOST 16557-2005: Mineral powder for asphalt concrete and organo-mineral mixtures. Specifications.
GOST 16557-78: Mineral powder for asphaltic-mixtures. Technical requirements
GOST 2226-2013: Bags made of paper and composite materials. General specifications
GOST 2226-88: Paper bags
GOST 23558-94: Crushed stone-gravel-sandy mixtures, and soils treated by inorganic binders for road and airfield construction. Specifications
GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications
GOST 24099-80: Decorative facing slabs of crushed natural stone. Specifications
GOST 25485-89: Cellular concretes. Specifications
GOST 25607-2009: Crushed stone-sandy mixtures for road and airfield surfacing and bases. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 26633-91: Heavy-weight and sand concretes. Specifications
GOST 28013-98: Mortars. General specifications
GOST 30108-94: Building materials and elements. Determination of specific activity of natural radioactive nuclei
GOST 30491-2012: Organomineral mixtures and soils stabilized by organic binders for road and airfield construction. Specifications
GOST 30491-97: Organic mineral mixtures and soils stabilized by organic dinders for road and airfield construction Specifications
GOST 31015-2002: Bituminous stone mastic mixtures and stone mastic asphalt. Specifications
GOST 31357-2007: Dry bulding cement binder mixes. General specifications
GOST 31358-2007: Dry building flooring cement binder mixes. Specifications
GOST 31359-2007: Cellular autoclave curing concretes. Specifications
GOST 8267-93: Crushed stone and gravel of solid rocks for construction works. Specifications
GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests
GOST 8269.1-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works Methods clicmical analysis
GOST 8735-88: Sand for construction work. Testing methods
GOST 8736-2014: Sand for construction works. Specifications
GOST 8736-93: Sand for construction works. Specifications
GOST 9128-2009: Asphaltic concrete mixtures for roads and aerodromes and asphaltic concrete. Specifications
GOST R 52129-2003: Mineral powders for asphaltic concrete and organomineral mixtures. Specifications
GOST R 53361-2009: Bags made of paper and composite materials. General specifications
The Document is Referenced By:
GOST 17608-2017: The concrete paving slabs. Specifications
GOST 25214-2021: Dense silicate concrete. Technical specifications
GOST 26633-2012: Heavy-weight and sand concretes. Specifications
GOST 26633-2015: Heavy-weight and sand concretes. Specifications
GOST 32021-2012: Hard rock aggregates and fillers for production dre building mixes. Specifications
GOST 32942-2022: Prestressed reinforced concrete beams for switches. General specifications
GOST 33320-2015: Ferro-concrete cross ties for railways. General specifications
GOST 33389-2015: Public roads. Deicing materials. Test methods
GOST 8736-2014: Sand for construction works. Specifications
GOST 9128-2013: Asphaltic concrete and polymer asphaltic concrete mixtures, asphaltic concrete and polymer asphaltic concrete for roads and aerodromes. Specifications
GOST R 55052-2012: Reclaimed asphalt. Specifications
GOST R 58411-2019: Flexible concrete slabs. Technical specifications
GOST R 70222-2022: Heavy concretes. Technical conditions
ODM 218.2.042-2014: Guidelines. Warm asphalt mixes. Recommendations for use
ODM 218.2.079-2016: Recommendations about design macrorough pavings
ODM 218.3.054-2015: Device of a surface treatment and thin layers of wear with application of different types of fibers
ODM 218.3.058-2015: Guidelines for the use of synthetic fiber for dispersed reinforcement of hot asphalt concrete
ODM 218.3.096-2017: Guidelines for the volumetric design of asphalt mixtures according to the Marshall Methodology
ODM 218.3.102-2017: Guidelines for the construction of asphalt pavement under adverse weather conditions
ODM 218.3.112-2019: Guidelines for the development and approval of technological regulations for production at the enterprises of the road sector
ODM 218.4.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.8.009-2017: Methodological recommendations on dust removal technology for roads with transitional type of coating using bitumen emulsion
ODM 218.9.079-2016: Recommendations about design macrorough pavings
PNST 191-2017: Sulfur asphaltic concrete mixtures and sulfur asphaltic concrete. Specifications
PNST 192-2017: A mixture of crushed stone-mastic sulfur asphalt and stone-mastic sulfur asphalt. Specifications
PNST 266-2018: Cast sulfur asphalt mixture and cast sulfur asphalt. Specifications
RMD 32-18-2012 Sankt-Peterburg: Recommendations for the use of paving in the paving of residential and public business areas
RMD 32-18-2016 St. Petersburg: Recommendations for the use of paving in the construction of pavements for residential and public and business buildings
SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products
SP 243.1326000.2015: Design and construction of low-volume roads
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.