imgalt

GOST R 9.316-2006

ГОСТ Р 9.316-2006

Unified system of corrosion and ageing protection. Thermodiffusion of zinc coatings. General requirements and control methods

Единая система защиты от коррозии и старения. Покрытия термодиффузионные цинковые. Общие требования и методы контроля

Status: Effective

This standard applies to protective zinc coatings applied by thermal diffusion treatment in powder mixtures designed to ensure the corrosion resistance of products, parts and other metal products from steel, including increased strength, as well as from cast iron and copper alloys, and establishes general requirements for coatings and quality control methods. The coating is not recommended for use on products that, when operated, reach a temperature of 370 degrees. C and above or in contact with other parts reaching these temperatures.

Настоящий стандарт распространяется на защитные цинковые покрытия, наносимые методом термодиффузионной обработки в порошковых смесях, предназначенные для обеспечения коррозионной стойкости изделий, деталей и другой металлопродукции из стали, в том числе повышенной прочности, а также из чугуна и медных сплавов, и устанавливает общие требования к покрытиям и методы контроля их качества. Покрытие не рекомендуется применять на изделиях, которые при работе достигают температуры 370 град. С и выше или контактируют с другими деталями, достигающими этих температур

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 9/21/2006

SKU: RUSS60828

Price: $139.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 25 Mechanical Engineering »

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Welding regulations » Welding work »

Welding regulations » Main materials »

Welding regulations » Welding materials »

Welding regulations » Admission Testing »

Welding regulations » Documentation »

Welding regulations » Mechanical Testing »

Welding regulations » Heat treatment »

Welding regulations » Defects »

Welding regulations » Welding work » Dusting »

Welding regulations » Main materials » Steel, cast iron »

Welding regulations » Welding materials » Wire »

Welding regulations » Welding materials » Gases »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 007/2011 TR CU. On safety of products intended for children and adolescents » Regulations and standards (to TR CU 007/2011) »

Standards for pipe fittings (TPA) » 10. Production » 10.7 Coatings »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.2 Testing of manufacturing products »

ISO classifier » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.40 Metal coatings »

National standards » 25 MECHANICAL ENGINEERING » 25.220 Surface treatment and coating » 25.220.40 Metal coatings »

ISO classifier » 77 METALLURGY » 77.060 Corrosion of metals »

National standards » 77 METALLURGY » 77.060 Corrosion of metals »


As a Replacement Of:

GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods

The Document References:

Federal Law 184-FZ: About technical regulation

GOST 12.3.008-75: Production of metallic and non-metallic inorganic coatings

GOST 12601-76: Zinc powder. Specifications

GOST 1497-84: Metals. Methods of tension test

GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits

GOST 1759.4-87: Bolts, screws and studs. Mechanical properties and test methods

GOST 22356-77: High strength bolts and nuts аnd washes. General specifications

GOST 9.008-82: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Terms and definitions

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations

GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property

GOST 9.105-80: Unified system of corrosion and ageing protection. Paints coatings. Classification and basic parameters of painting methods

GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements

GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods

GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production

GOST 9.306-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Symbols

GOST 9.307-89: Unified system of corrosion and ageing protection. Hot-dip zinc coatings. general requirements and methods of checking

GOST 9.308-85: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Procedures for accelerated corrosion tests

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.

GOST 9.908-85: Unified system of corrosion and ageing protection. Metals and alloys. Methods for determination of corrosion and corrosion resistance indices

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 51163-98: Thermodiffusion zinc coatings on fasteners and other small products. General requirements and control methods

The Document is Referenced By:

Decision 31: On the list of international and regional (interstate) standards, and in their absence - national (state) standards, through the application of which on a voluntary basis compliance with the requirements of the technical regulations of the Customs Union "On safety of products designed for children and adolescents" (TR CU 007/2011), and the list of international and regional (interstate) standards, and in their absence - national (state) standards, containing rules and methods of research (tests) and the

Decision 31: On amendments to the technical regulation of the Customs Union "On safety of railway transport infrastructure" (TR CU 003/2011)

GOST 21797-2014: Two-turn spring washers for railway track. Specifications

GOST 32209-2013: Reinforced for overhead contact line supports оf railways. Specifications

GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies

GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies

GOST 32484.5-2013: High-strength structural bolting assemblies for preloading. Plain washers

GOST 32623-2014: Automatic tensioning devices of overhead contact line of railway. General specifications

GOST 33797-2016: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34452-2018: Disconnectors for the traction network of railways and their drives. General specifications

GOST R 51177-2017: Overhead line hardware. General technical requirements

GOST R 51559-2022: Power oil transformers of 110 and 220 kV voltage classes and autotransformers of 27,5 kV voltage class for AC traction railway power supply systems. General specifications

GOST R 52034-2008: Ceramic support insulators for voltage over 1000 V. General specifications

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52644-2006: Hexagon bolts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.

GOST R 52646-2006: Washers for high-strength bolts metal structures. Specifications.

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 54271-2010: Anchors for overhead and contact line supports of rail ways. Specifications

GOST R 54272-2010: Reinforced concrete foundations for overhead contact line supports of railways. Specifications

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 55186-2012: Cross beams of rigid portals for overhead contact line of railway transport. General specifications

GOST R 55189-2012: Line suspension polymeric rod insulators. General specifications

GOST R 55602-2013: Switching devices for railway traction network and power substations earthling. General specifications

GOST R 55648-2013: Insulators for contact net of railways. General specifications

GOST R 55883-2013: Disconnections for railways traction network and operating mechanisms for them. General specifications

GOST R 57992-2017: Trunk pipeline transport of oil and oil products. Cast iron ballast units. General specifications

GOST R 57993-2017: Trunk pipeline transport of oil and oil products. Concrete ballast units. General specifications

GOST R 58018-2017: Interim composite polymeric supports for overhead power lines voltage 35-220 kV. General specifications

GOST R 58021-2017: Composite polymeric supports for overhead power lines of voltage 6-20 kV. General specifications

GOST R 58115-2018: Converter transformers for voltages from 6 to 110 kV for railway traction substations. General specifications

GOST R 58351-2019: General automobile roads. Frontal road fences, holding lateral combined and holding pedestrian. General technical requirements. Testing and control methods. Application rules

GOST R 58618-2019: The main pipeline transport of oil and oil products. Tank equipment. Breathing and safety valves. General specifications

GOST R 59621-2022: Public roads. Bridge structures. Design of metal corrugated elements

GOST R 70203-2022: Aluminum roofs for tanks. Specifications

GOST R 70320-2022: Charging and charging converters and uninterruptible power supply devices for railway traction substations, transformer substations and linear devices of railway traction power supply system. General specifications

GOST R 8.929-2016: State system for ensuring the uniformity of measurements. Measuring complexes for railway contact networkРІР‚в„ўs parameters measuring. Technical requirements

Letter 2941-OG/03: About the presence of a typo in GOST R 59291-2021

PNST 320-2018: Bearing structures of railway signaling devices. General technical requirements

SP 226.1326000.2014: Power supply of not traction consumers. Rules for design, construction and renovation

SP 28.13330.2012: Corrosion protection of buildings structures. Updated living edition of SNiP 2.03.11-85

SP 72.13330.2016: Protection of buildings, facilities and structures against corrosion

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!