imgalt

GOST 3749-77

ГОСТ 3749-77

Checking 90° squares. Specifications

Угольники поверочные 90°. Технические условия

Status: Effective - Supersedes. The limitation of the effectiveness period has been lifted: Protocol No. 7-95 of the IGU dated 01.03.95 (IUS 11-1995)

The standard applies to 90 ° calibration squares with sizes up to 1600 mm.

Стандарт распространяется на поверочные угольники 90° размером до 1600 мм.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 6/22/1977

SKU: RUSS60868

Price: $109.00

English keywords: measuring instruments;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P54 Angle Measuring Instruments »


As a Replacement Of:

GOST 3749-65: Squares for testing, 90 degrees

The Document References:

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence

GOST 2.601-2006: Unified system for design documentation. Exploitative documents

GOST 2.601-95: Operational documents

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 2999-75: Metals and alloys. Vickers hardness teat by diamond pyramid

GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications

GOST 5950-73: Bars and strips from a toolhouse steel alloy

GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications

GOST 801-78: Bearing steel. Specifications

GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements

GOST 9396-88: Boxes wooden reusable

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

The Document is Referenced By:

GOST 10.55-71: Birch plywood. Technical requirements for export products

GOST 1005-86: Wooden plank panels for the factory-made timber frame houses

GOST 10092-75: Cupro-nickel tubes for heat-exchanging apparatus. Specifications

GOST 10180-2012: Concretes. Methods for strength determination using reference specimens

GOST 10180-90: Concretes. Methods for strength determination using reference specimens

GOST 102-75: Birch plywood for aircraft. Specifications

GOST 10354-82: Polyethylene film Specifications

GOST 10480-88: Powder metal compacting mechanical automatic machines. Parameters and dimensions. Norms of accuracy

GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications

GOST 10560-88: Hydraulic sheet bending presses. Parameters and dimensions. Norms of accuracy

GOST 10663-88: Automatic straightening and cutting machines for round steel, model steel and reinforcement. Parameters and dimensions. Accuracy norms

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10703-73: Aluminium sheets for graphic arts industry. Specifications

GOST 10739-84: Automatic sheet stamping presses with underheath drive. Parameters and dimensions. Norms of accuracy

GOST 10767-87: Automatic machines for thermoplastic and thermosofting materials. Parameters and dimensions. Norms of accuracy

GOST 10922-2012: Welded reinforcing products and inserts, welded, lap and mechanical joints for reinforced concrete structures. General specifications

GOST 10922-90: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST 10988-75: Oxygen-free copper bars for electrovacuum industry. Specifications

GOST 11047-90: Wood details and articles for one-two storey dwelling and public buildings

GOST 111-2001: Flat glass. Specifications

GOST 11127-78: Wooden drums for wire ropes. Specifications

GOST 11268-76: Structural thin sheets of special purpose alloyed high quality steel

GOST 11269-76: Universal rolled plates and wide strips made of special purpose structural high-grade Alloy steel

GOST 11539-2014: Bakelized plywood. Specifications

GOST 11539-83: Bakelite resin plywood

GOST 11573-2022: Refractory products. Method for determining the coefficient of gas permeability

GOST 11573-98: Refractory articles. Method of permeability to gas coefficient determination

GOST 11586-2005: Refractories for bottom pouring of steel. Specifications

GOST 11586-69: Refractories for bottom pouring of steel. Specifications

GOST 11647-75: Combined press-shears and combined shears. Norms of accuracy

GOST 1208-73: Pressed bronze tubes

GOST 12301-2006: Cartons of paperboard, paper and composite materials. General specifications

GOST 12301-81: Cartons made from cardboard, paper

GOST 13309-90: Note-books

GOST 13448-82: Plastic ventilation grilles. Technical conditions

GOST 13715-78: Glued boards. Specifications

GOST 13913-78: Laminated wood plastics. Specifications

GOST 13996-84: Facade ceramic tiles and carpets thereof. Specifications

GOST 1435-90: Unalloyed tool steel bars, strips and coils

GOST 1435-99: Bars, strips and reels of tool unalloyed steel. General specifications

GOST 14614-79: Plywood plus

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14959-79: Spring carbon and alloy steel bars. Specifications

GOST 15040-2016: Oxygen-free copper pipes. Specification

GOST 15040-77: Oxygen-free copper pipes

GOST 15066-78: Foundry moulding machines. Norm of accuracy

GOST 1535-2006: Copper rods. Specifications

GOST 1535-2016: Copper rods. Specifications

GOST 1535-91: Copper rods. Specifications

GOST 15474-79: Single-shaft open single-acting presses. Standards of accuracy

GOST 15475-89: Simple action closed single-crank presses. Norms of accuracy

GOST 16136-80: Thermal insulating Perlite bitumen slabs. Specifications

GOST 16424-83: Blanks for sporting and hunting shooting gun stocks. Specifications

GOST 17177.2-81: Heat insulating construction materials and products. Methods for determining the correctness of geometric shapes

GOST 17177-87: Heat insulating construction materials and products. Methods of control

GOST 17177-94: Thermal insulating materials and products for building application. Test methods.

GOST 17245-79: Soils. Method of laboratory determination of temporary resistance for single-axial compression

GOST 17280-79: Window boards, wooden. Specification

GOST 17612-89: Ceramic acid-resistant pocking rings. Specifications

GOST 18103-84: Installations for manufacturing reinforced concrete three-dimensional elements of sanitary engineering cabins and lift shafts. Specifications

GOST 18124-2012: Chrysotile cement sheets are flat. Technical conditions

GOST 18326-87: Low-alloyed zinc sheets for one-stage and multistage etching. Specifications

GOST 18394-2016: Tin plated lead and tin foil. Specifications

GOST 18394-73: Tin plated lead foil and tin foil. Specifications

GOST 18623-82: Cast ceramic tiles and carpets thereof

GOST 18886-73: Steel forms for the manufacture of reinforced concrete and concrete products. General technical requirements

GOST 19246-82: Sheets and slabs from rolled slag-cobalt. Specification

GOST 19437-2019: Cylindrical aluminum ingots. Technical specifications

GOST 19437-81: Cylindrical aluminium ingots. Specifications

GOST 19946-74: Dies for casting of non-ferrous alloys. Specifications

GOST 2060-73: Brass rods. Specifications

GOST 2060-90: Brass rods. Specifications

GOST 20850-2014: Wooden glued load bearing structures. General specifications

GOST 20966-75: Laminated wood plastic, type ДСП-Б-a. Specifications

GOST 21102-97: Paper and board. Methods for determination of sheet dimensions and non-rectangularity

GOST 21153.0-75: Rocks. Sampling and general requirements for the methods of physical testing

GOST 21153.5-88: Rocks. Method for the determination of cut strength limit

GOST 21153.8-88: Rocks. Method for determination of triaxial compressive strength

GOST 21178-2006: Glued blanks. Specifications

GOST 21228-85: Celluloid. Specifications

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21546-88: Hammer dies for die forging

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21836-88: Sight glasses for industrial units. Specifications

GOST 21992-83: Profile building glass. Specifications

GOST 22082-76: Injection mould bases, detail-blanks and details of injection moulds. Specifications

GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications

GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications

GOST 22233-83: Aluminium and aluminium alloy extruded shapes for constructional guard structures and devices

GOST 22233-93: Extruded sections of aluminium alloys for enclosure building structures. General specifications

GOST 22620-83: Stone cast pipes. Specification

GOST 22685-77: Forms for making control samples of concrete. Specification

GOST 22685-89: Moulds for making control specimens of concrete. Specifications

GOST 23053-78: Baddeleyite-corundum refractories for the glass-making. Specifications

GOST 23166-78: Wooden windows

GOST 23166-99: Windows. General specifications

GOST 23342-2012: Architectural-building goods of the natural stone. Specifications

GOST 23342-78: Architectural-building goods of the natural stone. Specifications

GOST 23342-91: Natural stone architectural details. Specifications

GOST 23668-79: Stone blocks for road surfaces. Specifications

GOST 23775-79: Carbon products. Methods of determination for compressive, bend, tensile, strengths (diametric compression)

GOST 23794-84: Single-acting four-crank closed presses. Norms of accuracy

GOST 23855-2019: Cylindrical ingots from aluminum alloy AD31. Technical conditions

GOST 23855-79: Cylindrical ingots of aluminium alloy AD31. Specifications

GOST 24045-2010: Steel sheet cold-formed sections with trapezoidal corrugations for building. Specifications

GOST 24045-2016: Steel sheet clad-formed sections with trapezoidal corrugations for building specifications

GOST 24045-94: Steel shaped sheets with trapezoid corrugations for construction

GOST 24099-2013: Decorative facing slabs on basis of natural stone. Specifications

GOST 24099-80: Decorative facing slabs of crushed natural stone. Specifications

GOST 24581-81: Asbestos-cement sandwich panels with plastic foam thermal insulation. General specifications

GOST 24767-2018: Aluminium and aluminium alloys cold-formed sections for enclosing structures. Specifications

GOST 24767-81: Aluminium and aluminium alloys cold-formed sections for wall and roof structures. Specifications

GOST 24866-89: Sealed insulating glass units

GOST 24866-99: Sealed insulating glass units. Specifications

GOST 24950-2019: Curved bends and curve inserts on bends of the linear part of steel pipelines. Technical specifications

GOST 25715-83: Steel hot-rolled rectangular steel slab (slabs). Specification

GOST 25781-2018: Steel molds for the manufacture of reinforced concrete products. Technical specifications

GOST 25781-83: Steel moulds for reinforced concrete members. Specifications

GOST 25885-83: Glue laminated wood structures. Method of determination of the interlayer strength of the wood materials with wood glue joints

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications

GOST 26433.2-94: System of ensuring geometric parameters accuracy in building. Rules for measuring parameters of buildings and works

GOST 2678-87: Rolled roofing and hydroinsulatings materials. Methods of test

GOST 26823-86: A summer garden cottage. General specifications

GOST 26877-2008: Metal products. Methods of measuring form variations

GOST 26877-91: Metal products

GOST 26892-86: Wood doors. Method of testing for the resisters to impact load in the direction of opening

GOST 27180-2001: Ceramic tiles. Test methods

GOST 27180-2019: Ceramic tiles. Test methods

GOST 27180-86: Ceramic tiles. Test methods

GOST 27579-88: Rectangular formed-welded section roof trusses. Specifications

GOST 27680-88: Particle and fibre boards. Methods of shape and dimensions control

GOST 27812-2005: Glued laminated timber. Test methods for glue lines delaminating strength

GOST 28015-89: One-layer wooden floor panels. Technical requirements

GOST 28122-95: Stone-working grinding-polishing machines

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 28450-2014: Bridge wooden beams. Specifications

GOST 286-82: Clay sewer pipes

GOST 2977-82: Planed veneer. Specifications

GOST 2996-79: Aviation hardwood blanks. Technical conditions

GOST 30066-96: Electro insulating film 'Lavaril-2N'. Specifications

GOST 30340-2012: Corrugated chrysotile cement sheets. Specifications

GOST 30369-96: Stone milling machines General technical requirements and control methods

GOST 30416-2012: Soils. Laboratory testing. General requirements

GOST 30416-2020: Soils. Laboratory tests. General Provisions

GOST 30416-96: Soils. Laboratory testing. General requirements

GOST 30540-97: The equipment for manufacture of products from cellular autoclaved concrete. General specifications and control methods

GOST 30565-98: Hot-rolled steel shapes for machine-Building in chemical engineering and oil industry. General specifications

GOST 30629-2011: Materials and products facing of rocks. Test methods

GOST 30629-99: Cladding materials and products made of natural stone. Test methods

GOST 30647-99: Casting equipment. Casting machines under low pressure. General specifications.

GOST 30673-2013: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30673-99: Polyvinylchloride profiles for windows and doors. Specifications

GOST 30733-2000: Hard coat low emissivity glass. Specifications

GOST 30762-2001: Refractory products. Methods of measuring geometrical dimensions, defects of shape and surfaces

GOST 30826-2001: Laminated glass for building. Specifications

GOST 30972-2002: Glue wood billets and details for windows and doors. Specifications

GOST 31.111.41-93: Parts and assembly units of universal assembly devices for metal-cutting machines. Basic parameters. Constructive elements. Norms of accuracy

GOST 31.211.41-93: Parts and assembly units of collapsible fixtures for assembly and welding

GOST 31364-2007: Soft coating low emissivity glass. Specifications

GOST 31559-2012: Anchor supports. General pecifications

GOST 31560-2012: Metal frame yield supports. Arch support. General specifications

GOST 32018-2012: Road-construction goods of natural stone. Specifications

GOST 32289-2013: Wood particleboards, laminated with paper impregnated with thermosetting resins

GOST 32304-2013: Laminate flooring based on dry process wood fibreboards. Specifications

GOST 32311-2012: Ceramic paving brick. Specifications

GOST 32557-2013: Glass and glass products. Inspection methods for geometric parameters and appearance

GOST 32568-2013: Glass units for vehicles grazing. Specifications

GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications

GOST 3262-75: Water-supply and gas-supply steel pipes Technical conditions

GOST 32661-2014: Fibrе reinforced thermosetting plastic pipes and parts of pipelines. General specifications

GOST 32694-2014: Plates for spike fastening of railway. Specifications

GOST 32949-2014: Automobile roads of general use. Supports of stationary electric lighting. Control methods

GOST 32956-2014: Public roads. Trays for road drainage. Methods of control

GOST 32962-2014: Automobile roads of general use. Kerb units. Control methods

GOST 33081-2014: Wooden glued bearing structures. Strength classes of structures elements and methods for its determination

GOST 33082-2014: Timber structures. Methods of determining the bearing capacity of the joints

GOST 33120-2014: Glued timber structures. Methods for determining strength of glue joints

GOST 33121-2014: Glued timber structures. Methods for determining the resistance of glue joints to the temperature and humidity effects

GOST 33124-2014: Laminated veneer lumber. Specifications

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 33145-2014: Public roads. Road mirrors. Methods of control

GOST 33535-2015: Connections and crossings of railway tracks. Specifications

GOST 33772-2016: Bags of paper. General specifications

GOST 33781-2016: Consumer packaging made of cardboard, paper and combined materials. General specifications

GOST 34349-2017: Glued timber structures. Methods for determining of glue joints long-term strength

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34664-2020: Thermite-welded railroad rails. Specifications

GOST 34665-2020: Electro-welded railway rails. Specifications

GOST 379-2015: Silicate bricks, stones, blocks and partition blocks. General specifications

GOST 379-95: Silicate brick and stones. Specifications

GOST 3916.1-89: Plywood with outer layers of deciduous veneer for general use. Specifications

GOST 3916.2-89: Plywood with outer layers of coniferous veneer for general use. Specifications

GOST 4004-64: Aluminium ingots for wire. Specifications

GOST 4041-2017: Hot-rolled thick-rolled for cold stamping from non-alloyed constructional quality steel. Technical conditions

GOST 4071.1-94: Refractory products with a true porosity of less than 45%. Determination of cold compressive strength

GOST 4248-2018: Chrysotile cement non-arcing boards for electrical purposes (ACEID). Specifications

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 4598-86: Fibre boards. Specifications

GOST 4728-2010: Axle billets for railway rolling stock. Specifications

GOST 473.6-81: Chemically resistant and heat resistant ceramic wares. The method for determination of compression strength

GOST 475-78: Wooden doors. General specifications

GOST 4981-87: Wooden joists. Specifications

GOST 5044-79: Thin-walled steel drums for chemical products

GOST 5151-79: Wooden drums for electrical cables and wires. Specifications

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 530-2007: Ceramic bricks and stones. General specifications

GOST 530-2012: Ceramic brick and stone. General specifications

GOST 530-95: Ceramic bricks and stones. Technical specifications

GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications

GOST 535-88: Common quality carbon bar and shaped sections. General specifications

GOST 5362-2018: Brass ribbons. Specifications

GOST 5362-78: Brass ribbons. Specifications

GOST 5384-89: Knuckle-joint cold stamping presses. Parameters and dimensions. Dimensions and arrangement of the slots and openings for fixing the tools. Norms of accuracy

GOST 5422-73: Hot-rolled special steel sections for tractors. Technical specifications

GOST 5500-2001: Stopper refractories for steel pouring from ladle. Specifications

GOST 5627-87: Automatic wire nail machines. Parameters and dimensions. Norms of accuracy

GOST 5641-66: Prisms for testing and marking

GOST 6133-2019: Concrete wall stones. Technical conditions

GOST 6133-99: Concrete wall stone. Specifications

GOST 6141-82: Glazed ceramic tiles for lining of the walls. Specifications

GOST 6266-89: Gypsum plasterboards. Specifications

GOST 6266-97: Gypsum plasterboards

GOST 6282-88: Plate crank shears with inclined blade. Parameters and dimensions. Norms of accuracy

GOST 6414-87: Automatic five-position nut cold upsetters. Parameters and dimensions. Norms of accuracy

GOST 6428-83: Plaster slabs for partitions. Specifications

GOST 6666-81: Kerbstones. Technical requirements

GOST 6688-2016: Brass bars of rectangular section. Specifications

GOST 6688-91: Brass bars of rectangular section. Specifications

GOST 6787-80: Ceramic floor tiles. Specifications

GOST 6799-2005: Glass articles for furniture. Specifications

GOST 6809-87: Hot stamping crank presses. Basic parameters and dimensions. Norms of accuracy

GOST 6810-2002: Wallpaper. Specifications

GOST 683-75: Glass for photographic plates specification

GOST 7023-89: Horizontal forging machines with vertical joint of dies. Parameters and dimensions. Norms of accuracy

GOST 713-88: Screw presses. Рarameters and dimensions, norms of accuracy

GOST 7286-81: Wooden T-squares. Specifications

GOST 7370-2015: Railway frogs. Specifications

GOST 7639-88: Straight side double action one point presses. Basic parameters and dimensions. Norms of accuracy

GOST 7766-88: Single-acting closed two-crank presses. Parameters and dimensions. Norms of accuracy

GOST 8.003-2010: State system for ensuring the uniformity of measurements. Tool-making microscopes. Verification procedure

GOST 8.003-71: State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification

GOST 8.003-83: State system for ensuring the uniformity of measurements. Tool-making microscopes. Methods and means of verification

GOST 8200-87: Hydraulic presses for plastic. Parameters and dimensions. Norms of accuracy

GOST 8242-88: Profiled details from wood and wood materials for building. Specifications

GOST 8260-88: Sheet stamping multiposition automatic press. Parameters and dimensions. Norms of accuracy

GOST 8269.0-97: Mauntainous rock road-metal and gravel, industrial waste products for construction works. Methods of physical and mechanical tests

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 862.1-2020: Parquet products. Massive parquet. Technical conditions

GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements

GOST 862.3-2020: Parquet products. Multilayer parquet. Technical conditions

GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements

GOST 862.4-2020: Parquet products. Parquet shields. Technical conditions

GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements

GOST 8673-82: Plywood boards. Specifications.

GOST 8673-93: Plywood panels

GOST 8747-88: Asbestos-cement sheet products. Test methods

GOST 8816-2014: Switch wooden beams. Specifications

GOST 8894-2018: Glass pipes. Specifications

GOST 8894-86: Glass pipes and shaped parts thereto Technical requirements

GOST 9272-2017: Hollow glass blocks. Specifications

GOST 9408-89: Simple action open single crank presses. Parameters and dimensions. Norms of accuracy

GOST 9479-2011: Blocks of rocks for the production of facing, architectural and construction, memorial and other products. Technical conditions

GOST 9479-84: Natural stone blocks for facing products. Technical requirements

GOST 9479-98: Rock blocks used for manufacture of facing, architectural and building, memorial and other products. Specifications

GOST 9480-2012: Plates facing from a natural stone. Technical conditions

GOST 9480-89: Sawn facing slabs of stone. Specifications

GOST 9498-2019: Flat bars of aluminum and aluminum wrought alloys for hire. Technical specifications

GOST 9498-79: Flat ingots of aluminium and wrought aluminium alloys for rolling. Specifications

GOST 9753-88: Hydraulic gap presses. Parameters and dimensions. Norms of accuracy

GOST 9800-79: Beams of opaque quartz glass. Specification

GOST 9800-84: Beams of opaque fused quartz glass. Specification

GOST 9861-88: Four-station cold-formers for timber articles of rod type. Parameters and dimensions norms of accuracy

GOST 99-2016: Veneer peeled. Technical conditions

GOST 99-89: Cut veneer. Specifications

GOST 99-96: Rotary cut veneer

GOST R 51045-2014: Rails of ways technological railways transport. General specifications

GOST R 51685-2013: Railway rails. General specifications.

GOST R 51748-2001: Metal frame yield supports. Arch support. General specifications

GOST R 52042-2003: Anchor supports. General specifications

GOST R 52078-2003: Wood particle boards, laminated with paper impregnated with thermosetting resins

GOST R 52172-2003: Glass units for vehicles glazing. Specifications

GOST R 52602-2006: Anticorrosive polymeric-asmol coating-tape "LIAM". Specifications

GOST R 52707-2007: Refractories for steel pouring. Refractory products for slide gates of casting ladles. Specifications

GOST R 53065.1-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 1. Test without packings

GOST R 53065.2-2008: Refractory products with less than 45 % true porosity. Method for determination of compressive strength at room temperature. Part 2. Test with packings

GOST R 53201-2008: Fibre-glass plastic pipes and fittings. Specifications

GOST R 53201-2023: Composite polymer pipes and fittings with threaded joints for pressure and non-pressure pipelines. Technical conditions

GOST R 53223-2016: Chrysotile cement slabs for wall facing. Specifications

GOST R 53629-2009: Sheet piles of steel cold-formed sections. Specifications

GOST R 54170-2010: Clear flat glass. Specifications

GOST R 54171-2010: Laminated glass. Specifications

GOST R 54175-2010: Sealed insulating glass units. Specifications

GOST R 54177-2010: Hart coat low emissivity glass. Specifications

GOST R 54179-2010: Hard coating solar protection or decorative glass. Specifications

GOST R 54560-2011: Fiberglass reinforced thermosetting plastic pipes and parts of pipelines. Specifications

GOST R 54577-2011: Modified wood. Specifications

GOST R 54912-2012: Modified wood for bear of slide. Specifications

GOST R 55075-2012: Sections of pipelines derived from composite materials intended for installation and rehabilitation of public water and wastewater systems. Specifications

GOST R 55078-2012: Fiberglass reinforced thermosetting plastic pipes. Glass reinforced thermosetting plastics cylinder shells of chimney and flue-pipes. Specifications

GOST R 55497-2013: Check railway rails. Specifications

GOST R 55820-2013: Switch and crossing rails. Specifications

GOST R 56064-2014: Safety of attractions. Capital repair of attractions. Procedure

GOST R 56207-2014: Slabs and tiles of engineered stone on the basis of natural quartz. Specifications

GOST R 56277-2014: Polymer composite pipes and fittings for intrafield pipelines. Specifications

GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications

GOST R 56706-2015: Glued cross laminated timber boards. Specifications

GOST R 56706-2022: Cross-laminated wood boards. General technical conditions

GOST R 56712-2015: Panel multilayer polycarbonate. Specifications

GOST R 57790-2017: Timber bearing structures. Methods of strength and deformability testing

GOST R 57997-2017: Welded reinforcing products and inserts, welded joints of reinforcement and inserts for reinforced concrete structures. General specifications

GOST R 58053-2018: Lifts. Installation, starting-up and adjustment works of dispatch control systems. Rules of the organization and manufacture of works, performance control and requirement for results of works

GOST R 58199-2018: Mining equipment. Anchor bolt of composite materials. General specifications

GOST R 58272-2018: Dry building masonry mixes. Technical conditions

GOST R 58385-2019: Cold-rolled steel profiles for construction. Technical specifications

GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications

GOST R 58401.12-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Method for determining the dynamic modulus of elasticity using the installation of dynamic loading (SPT)

GOST R 58401.14-2019: General automobile roads. Mixes asphalt concrete road and asphalt concrete. Sample preparation method for determining the dynamic module

GOST R 58527-2019: Wall materials. Methods for determining compressive and bending strengths

GOST R 58558-2019: Wooden structures. Glued rods Test methods for determining standard values ​​of mechanical characteristics

GOST R 58699-2019: Wood-aluminum window blocks. Technical conditions

GOST R 58700-2019: Wooden windows and balcony doors for low-rise residential buildings. Types, Design and Dimensions

GOST R 58756-2019: Polymer multilayer domes. Technical specifications

GOST R 58774-2019: The external walls are frame-sheathed self-supporting and non-bearing with a frame made of cold-rolled steel galvanized profiles. General specifications

GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications

GOST R 59687-2022: Metal panels with foam insulation. General technical specifications

GOST R 59689-2022: Three-layer chrysotile cement panels with foam insulation. General technical conditions

GOST R 59784-2022: Cross-laminated wood boards. Methods for determination of strength and elastic characteristics

GOST R 70189-2022: Image of a sign language interpreter on monitors during Internet and TV broadcasts. Display rules

GOST R 70192-2022: Dry frame cladding frame ceilings. Steel cold-formed galvanized steel frame flooring system. General technical requirements

GOST R 70202-2022: Joints of elements of wooden structures on glue rods. Methods for determining the standard values of resistance and pliability based on test results

GOST R 70228-2022: Wood building boards with oriented chips. Methods for determination of strength and elastic characteristics

GOST R 70306-2022: Centrifuged reinforced concrete columns of circular section for industrial buildings and engineering structures. Technical specifications

GOST R 70363-2022: Public roads. Concretes for construction of base layers and pavements. Test methods

GOST R 8.874-2014: State system for ensuring the uniformity of measurements. Autocollimators. Verification Procedure

GOST R 8.899-2015: State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Verification of measurement procedure

GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MI 133-77: State system for ensuring uniformity of measurements. Methods of calibration of PPS type sight tubes

MI 1673-87: State system for ensuring uniformity of measurements. Stakes and supports for gage heads. Methods of control

MI 1729-87: State system for ensuring uniformity of measurements. Calibration lines. Method of verification

MI 1782-87: GSI. Calibration procedure

MI 1799-87: Guidelines. Squares testing 90 degrees. Control method

MI 1825-88: Guidelines. GSE. Measuring projectors. Method of verification

MI 2007-89: State system for ensuring uniformity of measurements. Testing and marking plates. Method of verification

MI 2029-89: Calibration and marking prisms with one prismatic recess and grip. Methods of control

MI 2031-89: Calibration and marking iron prisms. Methods of control

MI 2106-90: Setting rings for measuring the diameters of the holes

MI 2191-92: Recommendation. State system for ensuring uniformity of measurements. Sinus rulers. Verification Method

MI 2203-92: Recommendation. State system for ensuring uniformity of measurements. Test methods for measuring pressure. Datasheets

MI 236-81: State system for ensuring uniformity of measurements. Methodical instructions. Universal measuring microscopes UIM-21, UIM-23, UIM-29. Methods and means of verification

MI 2585-2000: State system for ensuring uniformity of measurements. Diaphragm measuring piping. Primary calibration technique

MI 262-82: State system for ensuring uniformity of measurements. Methodical instructions. Measuring projection device IZV-23. Methods and means of verification

MI 263-82: Guidelines. Device measuring two-coordinate DIP-1. Methods and means of verification

MI 2638-2001: State system for ensuring uniformity of measurements. Chamber and tubeless diaphragms installed in flanged connections of measuring pipelines. Dimensional control methods for the primary and periodic calibration of measuring systems with restricting devices

MI 284-82: State system for ensuring uniformity of measurements. Methodical instructions. Horizontal comparator IZA-8. Methods and means of verification

MI 316-83: State system for ensuring uniformity of measurements. Methodical instructions. Length vertical IZV-5. Methods and means of verification

MI 516-84: Methodical instructions. Caliper of the traveling PShV type. Verification Method

MI 82-76: State system for ensuring uniformity of measurements. The method of calibration of the exemplary rings of the 4th category for the caliper with the cost of division of 0.001 and 0.002 mm

MI 836-85: State system for ensuring uniformity of measurements. Methodical instructions. Length vertical IZV-29. Method of verification

MI 936-85: Guidelines. State system for ensuring uniformity of measurements. Measures the length of the stroke model of the 3rd category (meters-comparators). Method of verification

MP 114-233-2018: GSI. Special flat angle measures

MP 203-9-2020: Squares testing 90 degrees of the Calibron trademark. Verification method

MU 9001.00.001: Diagnostic technique for Romanian fountain fittings that have worked out their standard service life

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

OST 102-45-85: Parts of pipelines seamless welded at PN up to 10.0 MPa (100 kgf / cm2). General specification

OST 108.030.133-84: Pipe elements of steam boiler heat surfaces under pressure less than 4 MPA, water boilers and heat-recovery boilers. Technical requirements, acceptance and control methods.

OST 108.030.40-79: Pipe elements of hear surfaces, connecting pipes with boiler, land-type steam boiler headers. General specifications.

OST 13-1-78: Fence wood. Specifications

OST 21-22-84: "Silakpor" sound absorbing plates. Specification.

OST 24.090.39-83: Shell stacker cranes. General specifications.

PNST 125-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for preparation of cylindrical specimens for determining dynamic modulus

PNST 133-2016: Automobile roads of general use. Hot asphalt mixtures and asphalt. Method for determination of the dynamic modulus

PNST 60-2015: Polymer soextrusion film modified nanocomposites. General specifications

PR 32 TsSh 001-2001: Rules for metrology. Methodical instructions. Metrological support of control patterns for linear parameters of sorting slide retarders

PR 32.131-98: Rules for Metrology. Typical training program for calibrators measuring instruments of geometric quantities in railway transport

RD 10-117-95: Requirements for Installation and Safe Operation of Rail Tracks of Gantry Cranes

RD 15-14-2008: Guidelines for the examination of the industrial safety of single-bucket excavators

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers

RD 34.10.130-96: Instructions for visual and measuring control.

RD 34.30.605: Process instruction for replacement of steam turbine blades

RD 34.35.618: Explosionproof Indicating Electrical Contact Pressure Gauges Type VE-16rb. Guide to Overhaul

RD 50:48:0075.01.05: Recommendations on organization and safe operation of ground gantry rails.

RD 50:48:0075.03.05: Recommendations for the design and safe operation of elevated crane tracks

RD 50-434-83: Guidelines. Autocollimators. Methods and means of verification

RD-15-15-2008: Guidelines on the procedure for conducting industrial safety expertise of mine electric locomotives

RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI

RST RSFSR 391-86: The pencils. General technical conditions

RST RSFSR 392-86: Pencil pencil. General technical conditions

RTM 36.44.15.3-87: Recommended Practice for Fabrication of Polyethylene and Polypropylene Pipe Fittings Used for Installation of Process Piping

RTM 393-94: Technical Guides for welding and quality control of the joints of reinforcement and embedded items of concrete elements

SNiP 5.02.02-86: Standards of construction tools requirements

SP 12-103-2002: Tracks for ground rail cranes. Design, installation and operation

SP 470.1325800.2019: Steel structures. Work Rules

SP 53-101-98: Manufacturing and quality control of steel structures for construction

ST RK 1447-2005: Pre-stressed reinforced concrete sleepers for railway with gage 1520 mm. General specification

ST RK 2432-2013: Railway rails differentially strengthened and not-heat-strengthened. General specification

ST SSFZhT TsT-TsV-TsL 084-2000: Rolling stock of railways. Springs cylindrical screw carriages. Typical test method.

STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work

TR 94.04-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 04: Construction of Brick Buildings

TU 102-339-83: Asbestos-cement three-layer partition walls on a wooden frame with mineral wool plates

TU 102-357-83: Three-layer steel wall panels with mineral wool insulation for block boxes and blocks

TU 102-367-84: Three-layer steel partition walls with mineral wool

TU 112000-001-12586100-2009: Steel curved profiles for light steel structures. Technical conditions

TU 1303-002-08620133-01-TU-LU: Electrowelded pipes made of carbon and low alloy steels for steam and hot water pipelines

TU 14-3-1760-91: Seamless Steel Pipes, Hot Deformed, Higher Precision

TU 14-3-1972-97: Seamless hot-deformed oil and gas pipes of increased corrosion resistance and cold resistance. Technical conditions

TU 21-31-69-89: Gypsum fiber sheets. Technical conditions

TU 34 10.10055-97: Vertical cylindrical steel tanks. Technical conditions

TU 34-38-20219-94: Economizers smooth tube steam stationary boilers. Technical conditions for major repairs

TU 34-38-20220-94: Smooth tube steam stationary boilers with natural circulation screens. Technical conditions for major repairs

TU 34-38-20222-94: Steam superheaters of stationary steam boilers. Technical conditions for major repairs

TU 35-1385-81: Span metal railway buildings with riding on top 18.2 - 33.6 m

TU 35-1757-87: Buildings spanning railway bridges with riding on top on the ballast of box section Lp = 33.6 m; 45.0 m. Specifications

TU 5216-002-03910056-2008: Barrier metal fencing. Technical conditions

TU 5262-001-23083253-96: Expanded steel sheets. Technical conditions

TU 5361-002-39430024-07: Hardwood boards

TU 5369-004-54965805-05: Wooden glued blanks and details for interior decoration

TU 5859-002-59565714-2012: Concrete protective flexible universal slabs

TU 5913-001-58455567-2004: Low-Emission Glass with Soft Coating

TU 67-18-172-94: Roofing and wall three-layer frame panels with steel linings and mineral wool insulation. Technical conditions

TU 67-564-83: Swing gate type of GRP. Technical conditions

TU 95.349-2000: Longitudinal electric-welded pipes from steel grades 08X18H10T, 12X18H10T for atomic electric and thermal stations. Technical specifications

VSN 003-88: Design and Installation Guidelines to Plastic Piping

VSN 210-80: Instruction on installation of lifts

VSN 214-82: Collected volume of instructions on rust-proofing

VSN 35-86: Guidelines for Installation of Plastic Piping at USSR Gosagroprom Facilities

VSN 373-85: Organization of Tool Departments for Installation and Specialized Construction Contractors

VSN 440-83: Installation Guidelines to Plastic Process Piping

VSN 470-89: Specified Quantity Allowances for Hand Tools, Erection Appurtenances, and Mechanisms Used in Installation Practices and Military Construction

VSN 57-88(r): Ordinance on Technical Inspection of Residential Buildings

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!