GOST R 53561-2009

ГОСТ Р 53561-2009

Pipelines valves. Jackets of oval, octagonal section, lens steel for valves flanges. Design, dimension and general technical requirements

Арматура трубопроводная. Прокладки овального, восьмиугольного сечения, линзовые стальные для фланцев арматуры. Конструкция, размеры и общие технические требования

Status: Effective - Introduced for the first time. IUS 4-2010

This standard establishes the design, dimensions and general technical requirements for sealing steel gaskets of oval, octagonal cross-section for flange fittings with flanges having a sealing surface of version 7 according to GOST 12815 and version J of ISO 7005-1, as well as design, dimensions and general technical requirements for lens gaskets with flanges having a sealing surface of execution 6 according to GOST 12815. This standard applies to gaskets oval, octagonal with Healing for flange connections with flanges of nominal diameter DN from 10 to 400 for nominal pressure PN from 6.3 to 20 MPa (from 63 to 200 kgf / cm2) according to GOST 12815 and ISO 7005-1, as well as to lens gaskets for flange connections with flanges of nominal diameter DN from 10 to 400 for nominal pressure PN from 6.3 to 20 MPa (from 63 to 200 kgf / cm2) according to GOST 12815

Настоящий стандарт устанавливает конструкцию, размеры и общие технические требования на уплотнительные стальные прокладки овального, восьмиугольного сечения для фланцевых соединений арматуры с фланцами, имеющими уплотнительную поверхность исполнения 7 по ГОСТ 12815 и исполнения J по ИСО 7005-1, а также конструкцию, размеры и общие технические требования на линзовые прокладки с фланцами, имеющими уплотнительную поверхность исполнения 6 по ГОСТ 12815. Настоящий стандарт распространяется на уплотнительные прокладки овального, восьмиугольного сечения для фланцевых соединений с фланцами номинального диаметра DN от 10 до 400 на номинальное давление PN от 6,3 до 20 МПа (от 63 до 200 кгс/см2) по ГОСТ 12815 и ISO 7005-1, а также на линзовые прокладки для фланцевых соединений с фланцами номинального диаметра DN от 10 до 400 на номинальное давление PN от 6,3 до 20 МПа (от 63 до 200 кгс/см2) по ГОСТ 12815

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 14

Approved: Federal Agency for Technical Regulation and Metrology, 12/15/2009

SKU: RUSS60962

Price: $57.42

English keywords: gaskets; pipe fittings;



The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 23 Hydraulic and pneumatic systems and components for general use. »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.6 Gaskets »

Standards for pipe fittings (TPA) » 9. Materials for piping valves (TPA) » 9.4 Sealing materials, adhesives, sealants »

Standards for pipe fittings (TPA) » 6. Standards of connecting sizes of piping valves (TPA) » 6.1 Flange connection »

ISO classifier » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National standards » 23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS » 23.040 Pipelines and their components » 23.040.60 Flanges, couplings and connections »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G1 General parts and units of machines » G18 Fittings and pipeline connections »


The Document References:

GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

Federal Law 184-FZ: About technical regulation

The Document is Referenced By:

GOST 33259-2015: Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements

GOST 33852-2016: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

GOST 34029-2016: Pipeline accessories. Check fittings for main oil pipelines and oil product pipelines. General specifications

GOST R 54432-2011: Flanges for valves, fittings, and pipelines for pressure from PN 1 to PN 200. Design, dimensions and general technical requirements

GOST R 55020-2012: Pipeline valves. Knife gate valves for trunk pipelines. General specifications

ST TsKBA 099-2011: Pipe fittings. Repairs. Organization of repair and general repair manual

GOST R 58616-2019: Pipe fittings. Regulating fittings for main oil pipelines and oil product pipelines. General specifications

Customers Who Viewed This Item Also Viewed:

Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Basic and safety principles for man-machine interface, marking and identification. Identification of conductors by colours and alphanumerics.
Language: English
Price: $57.42
Occupational safety standards system. Noise. General safety requirements
Language: English
Price: $150.48
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Buildings and constructions. Method for determining wind loads on the building envelope
Language: English
Price: $88.22
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $448.52
Loads and actions
Language: English
Price: $495.00
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Language: English
Price: $106.03
Erecting cranes. Removable lifting devices and containers. Operation
Language: English
Price: $651.36
Vessels and Apparatus. Norms and methods of strength calculation from wind loads, seismic influence and other external loads
Language: English
Price: $311.85
Industrial equipment. General safety requirements
Language: English
Price: $71.53
Three-phase asynchronous motors. General specifications.
Language: English
Price: $100.98
Rules for Development, Production and Application of Membranous Safety Equipment
Language: English
Price: $242.55
Asbestos fabric
Language: English
Price: $105.54
Steel butt-welded flanges for Pnom from 0,1 to 20,0 MPa (from 1 to 200 kgf/cm2). Design and dimensions
Language: English
Price: $130.68
Welded joints. Methods of mechanical properties determination
Language: English
Price: $218.79
Strength calculation norms for stationary boilers and steam and hot water pipelines.
Language: English
Price: $445.50
Guidelines for technological design of seaports. Parts I and II. Ministry of Transport, DMT. Soyuzmorniiproekt, 1993
Language: English
Price: $2,214.83
Steel castings. General specifications
Language: English
Price: $170.28
Norms of technological design of seaports. Ministry of Transport, DMT Soyuzmorniiproekt, 1997
Language: English
Price: $346.50

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message live-chat-up-arrow live-chat-down-arrow

Leave your message in the form below, and we will write back by e-mail!