GOST IEC 61557-3-2013
ГОСТ IEC 61557-3-2013
|
|
Low voltage distribution systems up to 1000 V a. c. and 1500 V d. c. Electrical safety. Equipment for testing, measuring or monitoring of protective measures. Part 3. Loop impedance
Сети электрические распределительные низковольтные напряжением до 1000 В переменного тока и 1500 В постоянного тока. Электробезопасность. Аппаратура для испытания, измерения или контроля средств защиты. Часть 3. Полное сопротивление контура
Status: Effective - Introduced for the first time. IUS 12-2014
This standard establishes requirements for equipment designed to measure the circuit impedance between a phase conductor and a protective conductor or a phase conductor and a neutral, or between two phase conductors by determining the voltage drop across the load connected to the circuit under test (hereinafter referred to as instrumentation). This standard is used in conjunction with IEC 61557-1: 2007
Настоящий стандарт устанавливает требования к аппаратуре, предназначенной для измерения полного сопротивления контура между фазным проводником и защитным проводником или фазным проводником и нейтралью, или между двумя фазными проводниками путем определения падения напряжения на нагрузке, подключаемой к испытуемой цепи (далее - измерительная аппаратура). Настоящий стандарт применяют совместно с IEC 61557-1:2007
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
3/11/2014
SKU: RUSS60979
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
17 Metrology and measurements. Physical phenomena »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
004/2011 TR CU. About safety of low voltage equipment »
Regulations and standards (to TR CU 004/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.10 Operation of electrical installations, electrical equipment and power tools »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.4 Instruments for electrical and magnetic measurements »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.1 Basic requirements for instruments and test equipment »
ISO classifier »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
National standards »
17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA »
17.220 Electricity. Magnetism. Electrical and magnetic measurements »
17.220.20 Measurement of electrical and magnetic quantities »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
29.080.01 Electrical insulation in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.080 Insulation »
29.080.01 Electrical insulation in general »
ISO classifier »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.01 Power and distribution networks in general »
National standards »
29 ELECTRICAL ENGINEERING »
29.240 Power transmission networks and distribution networks »
29.240.01 Power and distribution networks in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P0 General rules and regulations for instrument-making industry »
P01 Technical documentation and general technical requirements. »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
The Document is Referenced By:
GOST IEC 61557-10-2015: Electrical safety in low-voltage distribution systems up to 1000 V AC and 1500 V DC. Equipment for testing, measuring or monitoring protective devices. Part 10. Integrated measuring equipment for testing, measuring or monitoring protective devices
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.