GOST R 12.4.201-99
ГОСТ Р 12.4.201-99
Occupational safety standards system. Materials for personal protection equipment with rubber-or plastics-coated fabrics. Accelerated-ageing test method
Система стандартов безопасности труда. Материалы для средств индивидуальной защиты с резиновым или пластмассовым покрытием. Метод искусственного старения
Status: Not effective - Canceled. Registration information 1798-st dated November 26, 2014 (official site of Rosstandart)
The standard establishes methods for assessing the resistance of coated fabrics to artificial aging. The standard applies to polymeric materials, which are textile materials with rubber or plastic coating (artificial leather and rubberized fabrics), intended for the manufacture of personal protective equipment, and establishes the basic requirements for methods of testing for accelerated aging under conditions of exposure to elevated temperature and humidity.
Стандарт устанавливает методы оценки сопротивления тканей с покрытием к искусственному старению. Стандарт распространяется на полимерные материалы, представляющие собой текстильный материал с резиновым или пластмассовым покрытием (искусственные кожи и прорезиненные ткани), предназначенные для изготовления средств индивидуальной защиты, и устанавливает основные требования к методам испытания на ускоренное старение в условиях воздействия повышенной температуры и влажности.
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
The Product is Contained in the Following Classifiers:
Evidence base (TR CU, Technical Regulation of the Customs Union) »
019/2011 TR CU. On safety of personal protective equipment »
Regulations and standards (to ТР ТС 019/2011) »
SECTION III. LABOR PROTECTION AND SAFETY »
II Industrial sanitation and occupational health »
8 Personal protective equipment »
8.1 Insulating suits »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.5 Testing and control of light industry products »
4.5.1 Textile Industry Products »
ISO classifier »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.40 Coated Fabrics »
National standards »
59 TEXTILE AND LEATHER PRODUCTION »
59.080 Textile products »
59.080.40 Coated Fabrics »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L6 Rubber and asbestos products »
L69 Test methods. Packaging. Marking »
National Standards for OKSTU »
RUBBER AND ASBESTOS PRODUCTS »
Rubberized fabrics »
The Document References:
GOST 12.4.102-80: Safety standards system. Materials for special foot-wear uppers. Determination of liquid aggressive material permeability
GOST 12.4.129-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petrolеum and petrolеum products penetration
GOST 12.4.130-83: System of safety standards. Materials for special foot-wear uppers. Method for determination of petroleum and petroleum products resistance
GOST 12.4.146-84: Occupational safety standards system. Polymer coated materials for special clothes and hand protection means. Method for determination of acid and alkali resistance
GOST 12.4.147-84: Occupational safety standards system. Artificial leather for hand protection means. Method for determination of acid and alkali permeability
GOST 12.4.148-84: Occupational safety standards system. Materials for special foot-wear uppers. Method for determination of organic solvents resistance
GOST 12.4.149-84: Occupational safety standards system. Materials for special foot-wear uppers. Method for determination of organic solvent permeability
GOST 17074-71: Artificial leather. Method for the determination of tear strength
GOST 17316-71: Artificial leather. Measuring method of tearing load and elongation of break
GOST 19616-74: Weaving and knitted fabrics. A method for evaluating the specific surface resistance
GOST 22944-78: Artificial leather and film materials. Method for the determination of water penetrability
GOST 27708-88: Decontaminable protective polymeric materials and coatings. Method for testing the ease of decontamination
GOST 28936-91: Artificial leather. Method for determination of resistance to rubbing
GOST 30303-95: Fabrics coated with rubber or plastics. Determination of breaking strength and elongation at break
GOST 30304-95: Fabrics coated with rubber or plastics. Determination of tear resistance
GOST 413-91: Rubber or plastics-coated fabrics. Determination of resistance to penetration by water
GOST 8975-75: Artificial leather. Test methods for rubbing and adhesion strength of coating
GOST 8977-74: Artificial leather and films. Methods for determination of flexibility, hardness and elasticity
GOST 8978-75: Artificial leather and films. Methods of determination of stability of repeated flexing
GOST 8979-75: Artificial leather and films. Determination methods of resistance to heat and light stability
GOST 9.707-81: Unified system of corrosion and ageing protection. Polymeric materials. Methods of accelerated climatic ageing test
Customers Who Viewed This Item Also Viewed:
Waste paper and board. Specifications
Food products. Methods for detection and quantity determination of coliformes
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Containers for blood and its components. Requirements for chemical and biological safety and methods of testing
Guidelines for gas chromatographic measurement of the content of cyclohexanone and cyclohexanol in the swabs on the skin
Reinforcing rolled products for reinforced concrete constructions. Specifications
Medical devices. Safety requirements. Methods of sanitation-chemical and toxicological tests
Gas chromatographic determination of hexane, heptane, acetaldehyde, acetone, methyl acetate, ethyl acetate, methanol, isopropanol, acrylonitrile, n-propanol, n-propyl acetate, butyl acetate, isobutanol, n-butanol, benzene, toluene, ethyl benzene, m-o, and
Processing equipment and process pipelines
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Technical regulations of Customs Union. About safety equipment for use in explosive environments
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.