GOST 12034-77
ГОСТ 12034-77
|
|
Enamels MЛ-165, MЛ-165ПM and MC-160. Specifications
Эмали марок МЛ-165, МЛ-165ПМ и МС-160. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 592 of 06.29.92
The standard applies to patterned (hammer) semi-gloss and semi-gloss enamels of the ML-165, ML-165PM and MS-160 grades, which, depending on the brand, are a suspension of pigments or pigments with a filler in a mixture of alkyd and melamine-formaldehyde resins or in an alkyd resin mix with the addition of silicone fat
Стандарт распространяется на рисунчатые (молотковые) полуглянцевые и полуматовые эмали марок МЛ-165, МЛ-165ПМ и МС-160, представляющие собой в зависимости от марки суспензию пигментов или пигментов с наполнителем в смеси растворов алкидных и меламиноформальдегидных смол или в алкидностирольном лаке с добавлением силиконового жира.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
9/19/1977
SKU: RUSS61334
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L24 Varnish and enamel »
The Document is Replaced With:
GOST 12034-2020: Enamels of the ML-165, ML-165PM and MS-160 brands. Specifications
As a Replacement Of:
GOST 12034-66: Hammer enamels of varied colors
The Document References:
GOST 12.1.007-76: Noxious substances. Classification and general safety requirements
GOST 12707-77: Wash primers. Specifications
GOST 13345-85: Tin-plate and black plate
GOST 14192-77: Marking of cargoes
GOST 14192-96: Cargo marking
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 16523-97: Rolled sheets from quality and ordinary carbon steel for general purposes. Specifications
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19433-88: Dangerous goods. Classification and marking
GOST 25718-83: Primers AK-069 and AK-070. Specifications
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 6613-86: Square meshed woven wire gauzes
GOST 6709-72: Distilled water. Specifications
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 6992-68: Lacquers and paints. Method for determination of weather-resistance of coatings
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9410-78: Petroleum xylol. Specifications
GOST 9754-76: Enamels MЛ-12 type. Specifications
GOST 9949-76: Coal xylene. Specifications
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.4-86: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
The Document is Referenced By:
GOST 16775-93: Plain snap gauges with cemented carbide alloy plates for diameters from 3 to 180 mm. Dimensions
GOST 17412-72: Electrical articles for the cold climate regions. Technical requirements, acceptance and test methods
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 22896-77: Paint coatings for electric locomotives of 1520 mm gauge main line railways. Specifications
GOST 22947-78: Paint coatings for diesel locomotives of 1520 mm gauge main line railways. Specifications
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 26215-84: Hand-held wood-saws
GOST 26665-91: Metal bodied planes. Technical specifications
GOST 28613-90: Paint coatings of bicycles, motor cycles, scooters, motor bicycles. General requirements and methods of control
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-79: Unified system of protection against corrosion. Coatings for paintwork intended for use in areas with tropical climate. General technical requirements and methods of accelerated testing
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing
GOST 9416-83: Building levels. Technical requirements
GOST R 58514-2019: Building levels. Technical conditions
IM 14-1-2004: Automation tools. Instruments for measuring and regulating the level. Directory
IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory
Letter 15153/05-DG: About the application of the standards
OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.
Protocol 03-14-PR: Meeting of the Working Group on making decisions on the possibility of using national and interstate standards developed on the basis of (instead of) previously valid, to ensure the activities of the Federal Accreditation Service (Rosakkreditatsiya) on accreditation and competence verification of accredited persons of April 29, 2022 N 03-14-pr
R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings
RD 302-07-16-91: General purpose pipeline valves. Paint coatings. General technical conditions
RD 34.35.606: General Guide to Overhaul of Thermal Automation and Measuring Equipment
RD 36-62-00: Hoisting equipment. General technical requirements.
RK 34-38-025-87: Guide to Overhaul of Indicating Pressure Gauges for Precise Measurements Type MTI
ST TsKBA 079-2010: General purpose pipeline valves. Paint coatings. General technical conditions
TU 2-034-439-88: Prisms testing and marking with one prismatic recess and overlay type P1
TU 34-38-20184-94: Stationary steam boilers. Intra drum separating devices. Technical conditions for major repairs
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.