GOST 22.2.04-2012

ГОСТ 22.2.04-2012

State system for ensuring the uniformity of measurements. Management and procedure of internal metrological surveillance of the enterprises with hazardous industrial objects

Безопасность в чрезвычайных ситуациях. Техногенные аварии и катастрофы. Метрологическое обеспечение контроля состояния сложных технических систем. Основные положения и правила

Status: Valid - Supersedes

The standard establishes the main provisions and rules of metrological support for monitoring the status of complex technical systems (hereinafter - JTS) in the event of man-made accidents and disasters, as well as in the conditions preceding these emergency situations, and in eliminating their consequences. The standard applies to ITS in which there may be a source of emergency or an emergency situation when exposed to an external source. The provisions and rules set forth in the standard are recommended to be used in the development of design, engineering and technological documentation on the JTS in terms of measurement procedures and measuring instruments that are part of the JTS or used to evaluate and ensure the safety of the JTS in the process of manufacturing, testing, transportation, construction , storage, commissioning, operation, disposal, liquidation, to protect STS in case of man-made disasters, as well as in the organization of the metrological support of the decree GOVERNMENTAL measuring instruments and their use.

Стандарт устанавливает основные положения и правила метрологического обеспечения контроля состояния сложных технических систем (далее - СТС) в условиях возникновения техногенных аварий и катастроф, а также в условиях, предшествующих этим чрезвычайным ситуациям, и при устранении их последствий. Стандарт распространяется на СТС, в которых могут возникнуть источник чрезвычайной ситуации или чрезвычайная ситуация при воздействии внешнего источника. Положения и правила, изложенные в стандарте, рекомендуется использовать при разработке проектной, конструкторской и технологической документации на СТС в части методик выполнения измерений и средств измерений, входящих в состав СТС или применяемых для оценивания и обеспечения безопасности СТС в процессе изготовления, испытаний, транспортирования, строительства, хранения, пусконаладочных работ, эксплуатации, утилизации, ликвидации, для защиты СТС при техногенных катастрофах, а также при организации метрологического обеспечения указанных средств измерений и их эксплуатации.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 11/22/2013

SKU: RUSS61395

Price: $192.06




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 13 Environmental protection, protection of people from environmental exposure. Security »

Construction (Max) » Standards » Other state standards used in construction » 17 Metrology and measurements. Physical phenomena »

PromExpert » SECTION III. LABOR PROTECTION AND SAFETY » V Social Security » 2 Safety requirements » 2.7 Security in civil defense and emergency protection »

PromExpert » SECTION II. METROLOGICAL » I Organizational and technical bases of metrological support » 1 Organization and management of metrological support » 1.1 Basic provisions of metrological support »

ISO classifier » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.020 Environmental protection » 13.020.01 Environment and environmental protection in general »

National standards » 13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY » 13.020 Environmental protection » 13.020.01 Environment and environmental protection in general »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.020 Metrology and measurements in general »


As a Replacement Of:

GOST 22.2.04-97: Safety in emergencies. Technogenic crashes and catastrophes. Metrological assurance of control of the complicated technical systems state. General statements and rules

The Document References:

GOST 8.010-2013: State system for ensuring the uniformity of measurements. Procedures of measurements. Main principles

GOST 8.010-90: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 54500.3-2011: Uncertainty of measurement. Part 3. Guide to the expression of uncertainty in measurement

GOST R 8.563-2009: State system for ensuring the uniformity of measurements. Procedures of measurements

GOST R 8.596-2002: State system for ensuring the uniformity of measurement. Metrological assurance for measuring system. Main principles.

MI 187-86: Guidelines. State system for ensuring uniformity of measurements. Reliability and requirements for calibration methods of measuring instruments

MI 188-86: Guidelines. State system for ensuring uniformity of measurements. Means of measurement. Establishing the values of the parameters of calibration methods

MI 1967-89: Recommendation. State system for ensuring uniformity of measurements. The choice of methods and measuring instruments in the development of measurement techniques. General provisions

MI 2174-91: Recommendation. State system for ensuring uniformity of measurements. Certification of algorithms and data processing programs for measurements. Main provisions

MI 2517-99: Recommendation. State system for ensuring uniformity of measurements. Metrological certification of software for measuring parameters of physical objects and fields using computer programs for generating digital test signals

RMG 43-2001: State system for ensuring the uniformity of measurements. The use of

The Document is Referenced By:

ODM 218.2.091-2017: Geotechnical monitoring of engineering protection of highways

GOST R 58494-2019: Mining equipment. Multifunctional coal mine safety systems. Remote control system for hazardous production facilities

GOST R 58604-2019: Unified energy system and isolated energy systems. Thermal power plants. Automated process control systems. Terms of creation. Norms and Requirements

ODM 218.5.015-2019: Guidelines for measuring the deformation of the roadbed of roads using the principles of inclinometry

Customers Who Viewed This Item Also Viewed:

Electromagnetic compatibility of technical equipment. Immunity of equipment for general lighting purposes to electromagnetic disturbance. Requirements and test methods
Language: English
Price: $218.25
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Еlectromagnetic compatibility of technical equipment. Harmonic current emissions (equipment input current <= 16 A per phase). Limits and test methods
Language: English
Price: $410.31
Еlectromagnetic compatibility of technical equipment. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated current <= 16 A and not subject to conditional connection. Limits and test methods
Language: English
Price: $359.87
Pipeline valves. General safety requirements
Language: English
Price: $213.84
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
Language: English
Price: $714.89
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Aviation turbine fuels. Determination of lubricity by the ball-on-cylinder lubricity evaluator (BOCLE)
Language: English
Price: $309.43
Aviation turbine fuel. Determination of acidity
Language: English
Price: $218.25
Petroleum products. Determination of color by Saybolt chromometer
Language: English
Price: $218.25
Passenger cars on locomotive traction. Requirements for structural strength and dynamic qualities
Language: English
Price: $595.58
Aviation fuels. Calculating net calorific value
Language: English
Price: $179.45
Aviation fuels. Calculating net calorific value
Language: English
Price: $192.06
Conformity assessment system for the use of nuclear energy. Personnel in the non-destructive and destructive testing of metal. Requirements and qualification procedure Дата введения в действие 15.03.2018
Language: English
Price: $207.90
Security of Financial (banking) Operations. Information Protection of Financial Organizations. Basic Set of Organizational and Technical Measures
Language: English
Price: $843.90
Construction in seismic regions of Ukraine
Language: English
Price: $5,909.85
Aviation turbine fuels and kerosine. Determination of smoke point
Language: English
Price: $270.63
Distillate fuels. Determination of free water and particulate contamination by visual inspection method
Language: English
Price: $165.87
Unified system of corrosion and ageing protection. Paint coatings. Groups of operation conditions
Language: English
Price: $158.40

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!