GOST 23616-79
ГОСТ 23616-79
|
|
System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
Система обеспечения точности геометрических параметров в строительстве. Контроль точности
Status: Effective
The standard applies to the construction of buildings and structures, the manufacture of elements for them (structures, products, parts) and establishes the basic rules and methods for controlling the accuracy of geometric parameters. Rules for monitoring the accuracy of the geometric parameters of specific types of structures of buildings and structures and their elements, as well as the work to be performed, are appointed on the basis of the standard in the relevant standards or in other regulatory and technical, as well as technological documents.
Стандарт распространяется на строительство зданий и сооружений, изготовление элементов для них (конструкций, изделий, деталей) и устанавливает основные правила и методы контроля точности геометрических параметров. Правила контроля точности геометрических параметров конкретных видов конструкций зданий и сооружений и их элементов, а также выполняемых работ назначают на основе стандарта в соответствующих стандартах или в других нормативно-технических, а также технологических документах.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Construction,
4/12/1979
SKU: RUSS61406
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
2. General technical regulatory documents »
k.24 Dimensional interchangeability and compatibility »
PromExpert »
SECTION I. TECHNICAL REGULATION »
III Quality »
1 Basic requirements for quality of products and services »
ISO classifier »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
National standards »
01 GENERAL PROVISIONS. TERMINOLOGY. STANDARDIZATION. DOCUMENTATION »
01.100 Technical drawings »
01.100.30 Construction drawings »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical aspects »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.010 Construction industry »
91.010.30 Technical Aspects »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh0 General rules and regulations for construction and building materials »
Zh02 Design and calculation norms »
National Standards for OKSTU »
SYSTEMS OF GENERAL TECHNICAL AND ORGANIZATIONAL-METHODOLOGICAL STANDARDS »
Design Documentation System for Construction (SPDS) »
The Document References:
GOST 15895-77: Statistical quality control. Terms and definitions
GOST 18242-72: Statistical acceptance inspection by alternative feature inspection plans
GOST 18321-73: Statistical quality control. Item random sampling methods
GOST 20736-75: Quality control. Sampling inspection by variables for normal distribution of inspected parameters
GOST 21779-76: System for ensuring geometric accuracy in construction. Technological tolerances of geometric parameters
GOST 21779-82: System of ensuring of geometrical parameters accuracy in construction. Manufacturing and assembling tolerances
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST R 50779.10-2000: Statistical methods. Probability and general statistical terms. Terms and definitions
GOST R 50779.11-2000: Statistical methods. Statistical quality control. Terms and definitions
GOST R 50779.71-99: Statistical methods. Sampling procedures for inspection by attributes. Part 1. Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection
GOST R 50779.74-99: Statistical methods. Sampling procedures and charts for inspection by variables for percent nonconforming
The Document is Referenced By:
GOST 10629-88: Prestressed reinforced concrete sleepers for 1520 mm gauge railways. Specifications
GOST 11047-90: Wood details and articles for one-two storey dwelling and public buildings
GOST 13015.1-81: Prefabricated concrete and reinforced concrete constructions and products. Acceptance
GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage
GOST 18128-2018: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 18128-82: Timber framed asbestos cement exterior wall panels supplied with insulation. Specifications
GOST 21778-81: System of ensuring of geometrical parameters accuracy in construction. Main principles
GOST 21780-2006: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 21780-83: System of ensuring the accuracy of geometrical parameters in construction. Accuracy calculation
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 22233-2018: Aluminium alloy extruded sections for translucent envelopes. Specifications
GOST 23118-2012: Building steel structures. General specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 23615-79: System of ensuring accuracy of geometrical parameters in construction. Statistical analysis of accuracy
GOST 23747-88: Doors of aluminium alloys. Specifications
GOST 25097-82: Windows and balcony doors made of wood and aluminium
GOST 25098-2016: Reinforced concrete panels for partitions in industrial and agricultural buildings. Specifications
GOST 26138-84: Elements of built-in furniture and entresol for residential buildings. Specifications
GOST 26433.0-85: System of ensuring geometrical parameters accuracy in construction. Rules of measurement. General
GOST 26823-86: A summer garden cottage. General specifications
GOST 28015-89: One-layer wooden floor panels. Technical requirements
GOST 33126-2014: Expanded clay concrete blocs. Specifications
GOST 33146-2014: Automobile roads of general use. Pipes for road culvert. Control methods
GOST 34378-2018: Translucent enclosing structures. Windows and doors. Installation work execution, check and demands for results of works
GOST 6133-2019: Concrete wall stones. Technical conditions
GOST 6133-84: Concrete wall stone. Specifications
GOST 6133-99: Concrete wall stone. Specifications
GOST 6665-82: Concrete and reinforced concrete stones. Specification
GOST 6785-80: Reinforced concrete window boards. Specifications
GOST 8242-88: Profiled details from wood and wood materials for building. Specifications
GOST 862.1-2020: Parquet products. Massive parquet. Technical conditions
GOST 862.1-85: Floor parquet production. Block parquet. Technical requirements
GOST 862.2-85: Floor parquet products. Mosaic parquet. Specifications
GOST 862.3-2020: Parquet products. Multilayer parquet. Technical conditions
GOST 862.3-86: Floor parquet products. Parquet boards. Technical requirements
GOST 862.4-2020: Parquet products. Parquet shields. Technical conditions
GOST 862.4-87: Floor parquet products. Parquet panels. Technical requirements
GOST R 51872-2002: Executive geodetic documentation in construction. Performance rules
GOST R 55260.1.1-2013: Hydro power plants. Part 1-1. Hydraulic structures of hydropower stations. General safety requirements
GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications
GOST R 56613-2015: Production of non-combustible and rotting modified wood. Specifications
GOST R 70448-2022: Translucent enclosing structures in low-rise residential buildings. Rules and control of installation works
MDS 11-19.2009: Interim recommendations for organization of technology geodetic quality construction of multifunctional high-rise buildings
MDS 11-20.2009: Methodics of precision noncontact executive survey of hinged facade systems with air gaps in the construction of tall buildings
MDS 11-21.2009: Method of determination of exact location and depth, as well as ruptures of underground utilities (power, signal cables, pipelines, gas, water, etc.) to prevent their damage during excavation
MDS 12-1.98: Recommended Practice for Development of Quality Systems in Construction and Installation Organizations (Based on ISO 9000 Standards)
MDS 12-23.2006: Temporary recommendations on the technology and organization of construction of multifunctional high-rise buildings and building complexes in Moscow
MDS 13-24.2010: Recommendations on the rules of geotechnical support of high-rise construction and adjacent space
ODM 218.2.012-2011: Classification of structural elements of artificial road structures
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
ODM 218.4.001-2008: Guidelines for the organization of inspection and testing of bridge structures on highways
Order 2079: List of documents in the field of standardization, the application of which on a voluntary basis to ensure compliance with the requirements of the Federal Law of December 30, 2009 № 384-FZ "Technical Regulations on the Safety of Buildings and Structures
PNST 338-2018: General automobile roads. Subgrade. Methods for determining geometric and physical parameters
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations
SNiP 32-04-97: Railway and highway tunnels
SP 122.13330.2012: Railway and highway tunnels
SP 126.13330.2012: Survey operations in construction
SP 126.13330.2017: Geodetic works in building
SP 412.1325800.2018: The construction of foundations of high-rise buildings and structures. Work Rules
SP 435.1325800.2018: Monolithic concrete and reinforced concrete structures. Rules for the production and acceptance of work
SP 83.13330.2016: Industrial furnaces and brick chimneys
STB 1081-97: Ferro-concrete sleepers, prestressed for 1520 mm gauge railways. Technical conditions
STB 2158-2011: Construction. Device bridges and pipes. The nomenclature of controlled quality indicators. Quality control of work
TR 206-09: Technical recommendations on the design and production of works on the installation of walling pits in the cramped conditions of the existing urban development in Moscow
TSN 13-311-01: Inspection and assessment of the technical condition of buildings and structures
TU 5361-002-39430024-07: Hardwood boards
VSN 361-85: Installation of Process Equipment on Foundations
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
