GOST 24709-81
ГОСТ 24709-81
|
|
Enamels ЭП-140. Specifications
Эмали ЭП-140. Технические условия
Status: Effective. The limitation of the effectiveness period has been lifted: Decree of the State Standard No. 1577 of 09.30.91
The standard applies to EP-140 enamels, which are a suspension of pigments and fillers in an epoxy resin solution in an organic solvent mixture with the addition of a hardener.
Стандарт распространяется на эмали ЭП-140, представляющие собой суспензию пигментов и наполнителей в растворе эпоксидной смолы в смесиорганических растворителей с добавлением отвердителя.
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
4/27/1981
SKU: RUSS61417
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
9. Materials for piping valves (TPA) »
9.6 Coating Materials »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L24 Varnish and enamel »
National Standards for OKSTU »
PAINT MATERIALS, SEMI-PRODUCTS, FILM, PHOTO AND MAGNETIC MATERIALS AND HOUSEHOLD CHEMICALS »
Condensation resin enamels, primers and putties »
The Document is Replaced With:
GOST 24709-2022: Enamels EP-140. Specifications
The Document References:
GOST 1012-72: Aviation petrol
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.3.005-75: Painting works
GOST 12.4.011-89: Occupational safety standards system. Means of protection. General requirements and classification
GOST 13345-85: Tin-plate and black plate
GOST 14192-77: Marking of cargoes
GOST 16523-89: Rolled sheets from carbon quality and ordinary steel for general purposes
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17537-72: Paint materials. Methods for the determination of the content of volatile and non-volatile matters, hard and film-forming materials
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 19433-88: Dangerous goods. Classification and marking
GOST 21743-76: Aviation oils
GOST 27271-87: Paints and varnishes. Method for control of working life
GOST 2768-84: Acetone technical. Specifications
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 5494-71: Pegmentary aluminium powder
GOST 5799-78: Flasks for paints and varnishes. Specifications
GOST 6128-81: Metal cans for chemical products
GOST 6589-74: Paintwork materials. Method for determination of grind degree by grindmeter 'Klin'
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 7827-74: Solvents of grades P-4, P-4A, P-5, P-5A, P-12 for paint materials. Specifications
GOST 8313-88: Technical ethylcellosolve. Specifications
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9410-78: Petroleum xylol. Specifications
GOST 982-80: Transformer oils
GOST 9949-76: Coal xylene. Specifications
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-86: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
TU 38.401-67-108-92: Gasoline-solvent for the rubber industry. Technical conditions
The Document is Referenced By:
GOST 22133-86: Paint and varnish coatings of metal-cutting, press-forging, foundry and wood-working equipment
GOST 23852-79: Coatings of lacquers and paints. General requirements for choice by decorative properties
GOST 24709-2022: Enamels EP-140. Specifications
GOST 9.074-77: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with moderate climate. General technical requirements and methods of accelerated testing
GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors
GOST 9.401-89: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with tropical climate. General requirements and methods of accelerated testing
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.404-81: Unified corrosion and ageing protection system. Coatings for paintwork intended for use in areas with cold climate. General requirements and methods of accelerated testing
GOST R 54893-2012: Passenger cars on locomotive traction and motor-cars. Lacquer and antidischarge coating reguirements.
GOST R 55779-2013: Cases of cumulative punches. Technical conditions
GOST R 56963-2016: Locomotives. Lacquer and antidischarge coating requirements and methods of their control
GOST R 59214-2020: Finishing materials for timber building structures. General specifications
Letter 10142/07-AS: On the application of standards
OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.
R 50-127-92: Recommendations. The designs are the basic carriers of radio-electronic means. Restrictive list of types of coatings
RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
SNiP 2.03.11-85: Corrosion protection of buildings structures
TR 129-02: Technical recommendations for the construction of heat and water supply networks of steel pipes with polyurethane foam insulation in underground channel and ground gaskets
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.