GOST 4381-87

ГОСТ 4381-87

Lever-type micrometers. General specifications

Микрометры рычажные. Общие технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Decree of the State Standard No. 1297 dated 10/05/92

The standard applies to lever micrometers with an upper measurement limit of up to 2000 mm, equipped with a reading device with a scale value of 0.002 and 0.01 mm for measuring external dimensions.

Стандарт распространяется на рычажные микрометры с верхним пределом измерений до 2000 мм, оснащенные отсчетным устройством с ценой деления 0,002 и 0,01 мм, для измерения наружных размеров.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstandart of the USSR, 2/20/1987

SKU: RUSS61524

Price: $198.00




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 3 Activities of testing laboratories » 3.2 Technical equipment of testing laboratories » 3.2.2 Measuring instruments and test equipment » 3.2.2.6 Instruments, tools and devices for linear, angular, profile and spatial measurements »

ISO classifier » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National standards » 17 METROLOGY AND MEASUREMENTS. PHYSICAL PHENOMENA » 17.040 Linear and angular measurements » 17.040.30 Measuring instruments »

National Standards for KGS (State Standards Classification) » Latest edition » P Measuring devices. Automation and computing facilities » P5 Instruments, tools and devices for linear, angular, profile and spatial measurements » P53 Instruments for measuring lengths (outer and inner dimensions) »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Lever devices »


As a Replacement Of:

GOST 4381-80: Lever-type micrometers. Specification

The Document References:

GOST 13762-86: Measuring means for linear and angular measurements. Marking, packing, transporting and storage

GOST 18833-73: Lever-gearing measuring heads. Specifications

GOST 2.601-95: Operational documents

GOST 27.301-95: Dependability in techniques. Dependability prediction. Basic principles

GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28197-90: National conformity mark. Form, sizes and technical requirements

GOST 577-68: Clock-type dial indicators graduated in unit divisions of 0,01 mm. Specifications

GOST 8.001-80: State system of ensuring the unity of measurements. Rules for conducting the state tests of measuring means

GOST 8.383-80: State system for ensuring the uniformity of measurements. State tests of means for measurements. General statements

GOST 8.411-81: State system for ensuring the uniformity of measurements. Lever micrometres. Rules and procedure of verification

GOST 9038-90: Gauge blocks. Specifications

The Document is Referenced By:

GOST 10007-80: Polytetrafluoroethylene. Specifications

GOST 10155-2016: Manganin uninsulated wire. Specification

GOST 10160-75: Magnetically soft precision alloys

GOST 1018-2015: Aluminium, copper, brass and cupronickel strips for capsules. Specifications

GOST 1018-77: Bands aluminium, copper, brass and cupronikel for capsules. Specifications

GOST 10234-77: Moderate strength flattened

GOST 10277-90: Putties. Specifications

GOST 1048-2016: Strips of aluminium bronze for springs. Specifications

GOST 1048-79: Strips of aluminium bronze for springs. Specifications

GOST 1049-2015: Manganese nickel wire. Specifications

GOST 1049-74: Manganese nickel wire

GOST 10533-86: Cold-rolled thermostatic bimetal strip

GOST 1066-2015: Brass wire. Specifications

GOST 10821-2007: Wire made of platinum and platinum-rhodium alloys for thermoelectric temperature transducers. Specifications

GOST 1173-2006: Copper foil, ribbons, sheets and plates. Specifications

GOST 1173-93: Copper strips. Specifications

GOST 12177-79: Cables, wires and cords. Methods of construction checking

GOST 12766.2-90: Strip from precision high electric resistance alloys

GOST 12920-2013: Brass wire for cold upsetting

GOST 12920-67: Brass wire for cold upsetting. Specifications

GOST 13073-2018: Zinc wire.Technikal requirements. Specifications

GOST 13726-78: Aluminium and aluminium alloys strips. Specifications

GOST 13726-97: Aluminium and aluminium alloys strips. Specifications

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 14080-78: Precision alloy strip with specified temperature coefficient of linear expansion. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14162-79: Steel tubes of small dimensions (capillary)

GOST 14311-85: Steel cord

GOST 14340.1-74: Enameled round wires. Method for measurement of wires diameters

GOST 15146-69: Thermal-treated steel tape for musical instrument reeds. Specifications

GOST 15598-70: Piano steel wire

GOST 15834-2016: Beryllium bronze wire. Specification

GOST 15834-77: Wire from beryllium bronze

GOST 15835-2013: Beryllium bronze bars. Specifications

GOST 15835-70: Beryllium bronze bars. Specifications

GOST 15885-2018: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 15885-77: Tin-zinc-lead bronze ribbons and strips. Specifications

GOST 16135-70: Steel wire for calculating devices

GOST 1628-78: Bronze rods. Specifications

GOST 16358-2019: Copper tapes for coaxial trunk cables. Technical conditions

GOST 16358-79: Copper strips for coaxial main cables. Specifications

GOST 17305-71: Wire of carbon construction steel. Specification

GOST 17305-91: Wire of carbon construction steel

GOST 1789-2013: Beryllium bronze strips and tapes. Specifications

GOST 1789-70: Beryllium bronze strips and ribbons. Specifications

GOST 1790-2016: Wire made of chromel alloy T, alumel, copes and constantan for thermoelectrodes of thermoelectric converters. Specification

GOST 1790-77: Wire made of chrome, aluminum, copper and constantan alloys for thermo electrodes of thermo-electric converters

GOST 1791-2014: Wire of nickel and copper-nickel alloys for extending wires for the thermoelectric converters. Specifications.

GOST 1791-67: Wire from nickel and copper-nickel alloys for extension leads to the thermoelectric transducers.

GOST 18143-72: Corrosion resistant

GOST 18351-73: Magnesium alloy extruded rods. Specifications

GOST 18389-2014: Wire of platinum and platinum alloys. Specifications.

GOST 18390-2014: Wire of palladium and palladium alloys. Specifications.

GOST 18834-83: Magnetic wire for recording harmonic signals

GOST 19351-2006: Wire made of iridium and rhodium. Specifications

GOST 19671-91: Tungsten wire for light sources

GOST 19703-79: Leaded brass wire type LS 63-3 specifications

GOST 20492-87: Tape recorder cassette. General specifications

GOST 21007-2014: Platinum wire for resistive temperature transducers. Specifications

GOST 21427.1-83: Electric steel thin sheets

GOST 21427.2-83: Cold-rolled isotropic electrical-sheet steel

GOST 21488-76: Extruded bars of aluminium and aluminium alloys

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 2170-2016: Strips of nickel and nickel low alloys. Specifications

GOST 2170-73: Strips of nickel and nickel low alloys. Specifications

GOST 2179-2015: Nickel and siliceous nickel wire. Specifications

GOST 2179-75: Nickel and silicon nickel wire

GOST 21996-76: Cold-rolled heat treated steel-cord belt

GOST 21997-76: Steel flattened strip of high strength

GOST 2208-2007: Brass foil, ribbons, strips, sheets and plates. Specifications

GOST 2208-91: Brass strips for general use. Specifications

GOST 22666-2016: Copper wire and kopel alloy wire for low-temperature thermoelectrical transducers. Specifications

GOST 22666-77: Copper and copel alloy wire for low-temperature thermocouples

GOST 2283-79: Cold-rolled tape made of tool steel and spring steel

GOST 2284-79: Cold-rolled carbon structural steel strip

GOST 23522-79: Cold-rolled strip for hack saws. Specifications

GOST 24552-81: Foil out of gold, silver and their alloys. Specifications

GOST 25951-83: Thermoshrinking polyethylene film. Specifications

GOST 26492-85: Titanium and titanium alloys rolled bars. Specifications

GOST 27266-87: Molybdenum wire for light sources

GOST 2786-82: Testing glasses for radii and form control of spherical optical surfaces. Specifications

GOST 28034-89: Electric insulating varnished fabrics

GOST 28777-2016: Furniture. Children's beds. Test methods

GOST 30246-94: Continuously rolled sheet steel with paint coating for Building

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 3193-2015: Platinum alloys catalytic gauzes. Specifications

GOST 32482-2013: Gold-rolled grain-oriented electrical steel sheet and strip for transformer. Specifications

GOST 33118-2014: Combined materials on basis of aluminium foil. Specifications

GOST 33212-2014: Non-grain oriented electrical steel strip. Specifications

GOST 3560-73: Sealing tepe

GOST 3822-79: Bimetallic steel-copper wire

GOST 3875-83: Steel card wire

GOST 4442-2014: Bands and strips of lead brass. Specifications

GOST 4442-72: Strips and bands of lead brass. Specifications

GOST 4752-2012: Cylinder copper wire. Specifications

GOST 4752-79: Copper cylinder wire

GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance

GOST 482-77: Zink oxide oil paste. Specifications

GOST 4976-83: Furniture lacquers НЦ-218, НЦ-222, НЦ-243 and НЦ-223. Specifications

GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5063-2016: Ribbons of cupro-nikel alloys. Specifications

GOST 5187-2003: Nickel silver, german silver and monel tapes. Specifications

GOST 5189-2018: Constantan strips. Specifications

GOST 5189-75: Constantan strips. Specifications

GOST 5220-2018: Germen silver wire. Specifications

GOST 5220-78: Nickel silver wire

GOST 5221-2008: Tin-zink bronze wire. Specifications

GOST 5221-77: Tin-zinc bronze wire

GOST 5222-2016: Silicon-manganese bronze wire. Specifications

GOST 5307-2015: Constantan uninsulated wire. Specifications

GOST 5437-85: Reed wire

GOST 5663-79: Carbon steel wire for cold upsetting

GOST 64-77: Enamels ГФ-230 BЭ. Specifications

GOST 6613-86: Square meshed woven wire gauzes

GOST 7372-79: Steel wire for ropes

GOST 745-2003: Aluminium foil for packing. Specifications

GOST 7871-75: Aluminum and aluminium alloy welding wire

GOST 8.044-80: State system for ensuring the uniformity of measurements. Diamond indenters of the hardness testing machines for metal and alloys. Verification methods and means

GOST 8.411-81: State system for ensuring the uniformity of measurements. Lever micrometres. Rules and procedure of verification

GOST 8.426-81: State system for ensuring the uniformity of measurements. Sphere rebound hardness testing machines. Methods and means of verification

GOST 8036-2013: Strips of brass Л90. Specifications

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 9.083-78: Unified system of corrosion and ageing protection. Paint coatings. Accelerated test methods for durability in liquid corrosive mediums

GOST 9.405-83: Unified system of corrosion and ageing protection. Paint coatings. Method for determination of hot drying conditions

GOST 9284-75: Slides for micropreparations. Specifications

GOST 931-90: Brass sheets and strips. Specifications

GOST 9389-75: Carbon steel spring wire

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 52018-2003: Shaft sinking hoppets. Specifications

GOST R 52145-2003: Combined materials on basis of aluminium foil. Specifications

GOST R 52217-2004: Sinking rope attachments. Specifications

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53405-2009: Copper cylinder wire. Specifications

GOST R 53439-2009: Brass wire for cold upsetting. Specifications

GOST R 53499-2009: Tombac strips. Specifications

GOST R 53803-2010: Copper rod for electrical purposes. Specifications

GOST R 53934-2010: Grain-oriented electrical steel strip. Specifications

GOST R 54150-2010: Wire from БрКМц3-1 bronze. Specifications

GOST R 54151-2010: Platinum alloys catalytic gauzes. Specifications

GOST R 54480-2011: Non-grain oriented electrical steel strip. Specifications

GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions

GOST R 8.597-2003: State system of insuring the uniformity of measurements. Coaxial loads. Method of verification

GOST R ISO 230-1-2010: Machine tools tests. Part 1. Measurement techniques of geometrics parameters

MI 1604-87: Guidelines. GSE. The measures of length are end-plane-parallel. General requirements for calibration procedures

MI 1863-88: Guidelines. State system for ensuring uniformity of measurements. The heads are measuring spring-optical. Opticators Method of verification

MI 1904-88: Threaded cylindrical gauges. Methods of control

MI 2077-90: Micrometers with inserts

MI 2131-90: Goniometers with nonius

MI 2190-92: State system for ensuring uniformity of measurements. Shtangenreysmasy. Method of verification

MI 2192-92: State system for ensuring uniformity of measurements. Indicators of the watch type with a division value of 0.01 mm. Method of verification

MI 424-84: State system for ensuring uniformity of measurements. Shtangenreissmass arrow model BV-6226. Methods and means of verification

MI 481-84: Guidelines. Dial Indicator with Damping Device. Model ICh 10MD. Methods and means of verification

MI 928-85: GSE. Exemplary rings of the 3rd category. Methodology of metrological certification

MU 0397-00.002: Non-Destructive Testing Methodology for VE-50 and VP-50 Swivels

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

OST 13-86-80: Metrological support of furniture production. General requirements for calibration data base and instruments. Gauges monitoring.

OST 24.090.39-83: Shell stacker cranes. General specifications.

R 3112199-0254-92: Time sheet of technological equipment for ATP of various capacities of TC and BTW

RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.21.543-88: Model Guidelines for Operation of Hydraulic Structures for Process Water Supply Systems of Thermal Power Stations

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 50-159-79: Guidelines for Calibrating Pulse Holographic Installations of the UIG-1M Type

RD 50-222-80: Guidelines. Verification of measuring holographic installations of type UIG-2 (UIG-2M and UIG-2G-1)

RD 50-366-82: Methodological instructions. Falling sphere Geppler viscometer. Methods and means of verification.

RD 50-98-86: Methodological instructions. Selecting universal means of dimensional measurement up to 500 mm (application as per GOST 8.051-81).

RD BGEI 37-01: Metrological support. The list of instruments and equipment of the calibration laboratory for cartographic work

Resolution 137/9-50: Typical consolidated norms of time for the repair of plumbing and sewerage equipment

TU 14-4-507-99: Woven with square micron mesh

TU 2311-042-21743165-2005: Varnish "Yarly" V-PL-1120. Technical conditions

TU 2312-075-21743165-2005: Enamel "YARLI" V-MA-1232. Technical conditions

TU 34-38-20197-94: Valves for steam and water DN 10, 20, 40, 50, 65 mm Chekhov factory of power engineering. Technical conditions for major repairs

TU 34-38-20395-95: Fans VDN-32B, VDN-28, VDN-26, VDN-24, VDN-22, VDN-20, VDN-18. Technical conditions for major repairs

TU 4833-002-08558606-95: Metal shielding of the PML type

TU 6-10-1052-75: Enamel VL-515 red-brown

TU 6-10-1117-85: Primer EP-057 Protector

Customers Who Viewed This Item Also Viewed:

Occupational safety standards system Electric welding works. Safety requirements
Language: English
Price: $53.00
Steel and alloys. Methods for detection and determination of grain size
Language: English
Price: $155.00
Involute toothed (splined) joints
Language: English
Price: $91.08
Gas-consuming thermal units. Industrial gas burners. Limiting concentration rates of NOx in combustion products
Language: English
Price: $71.00
Horns and signal whistles. General specifications
Language: English
Price: $64.00
Steel. Microstructure standards
Language: English
Price: $58.00
Steel. Metallographic methods for the determination of non-metallic inclusions
Language: English
Price: $228.00
Textiles and articles. Method for the determination of air permeability
Language: English
Price: $286.00
Containers for blood and its components. Requirements for chemical and biological safety and methods of testing
Language: English
Price: $222.00
Construction and rolling stock clearance diagrams
Language: English
Price: $2,129.00
Automobile roads of general use. Traffic load models, application of the load models
Language: English
Price: $117.00
Medical devices. Biological evaluation of medical devices. Part 12. Sample preparation and reference materials
Language: English
Price: $332.00
Medical devices. Safety requirements. Methods of sanitation-chemical and toxicological tests
Language: English
Price: $198.00
Feedstuffs, compound feeds, feed raw materials. Determination of mass fraction of choline chloride by capillary electrophoresis
Language: English
Price: $225.00
Distilled water. Specifications
Language: English
Price: $198.00

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!