imgalt

GOST 5009-82

ГОСТ 5009-82

Abrasive cloth. Specifications

Шкурка шлифовальная тканевая. Технические условия

Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)

The standard applies to fabric grinding cloth for abrasive processing of various materials without cooling or with the use of coolants based on oil, kerosene, white spirit.

Стандарт распространяется на тканевую шлифовальную шкурку, предназначенную для абразивной обработки различных материалов без охлаждения или с применением смазочно-охлаждающих жидкостей на основе масла, керосина, уайт-спирита.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Committee for Standards, 2/18/1982

SKU: RUSS61530

Price: $217.00

English keywords: abrasives;

National keywords: абразивы;

imgalt

The Product is Contained in the Following Classifiers:

ISO classifier » 25 MECHANICAL ENGINEERING » 25.100 Cutting tools » 25.100.70 Abrasives »

National standards » 25 MECHANICAL ENGINEERING » 25.100 Cutting tools » 25.100.70 Abrasives »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G2 Industrial tools and accessories » G25 Abrasive tools, diamond and abrasive materials »

National Standards for OKSTU » TOOL, TECHNOLOGICAL TOOLING, ABRASIVE MATERIALS » Flexible tool (abrasive paper) on a fabric backing »


As a Replacement Of:

GOST 5009-75: Abrasive cloth

The Document References:

GOST 10127-75: Moisture-proof base paper for abrasive materials

GOST 1051-73: Calibrated quality steel

GOST 15102-75: Universal metallic closed container of nominal gross mass 5,0 tn. Specifications

GOST 18277-90: Base-paper for emery-cloth. Specifications

GOST 2228-81: Paper for bags

GOST 27595-88: Grinding materials and abrasive tools. Packing, marking, transportation and storage

GOST 3252-80: Hide glue. Specifications

GOST 3357-72: Cotton fabrics for emery-cloths. Specifications

GOST 3647-80: Abrasives. Grain sizing. Graininess and fractions. Test methods

GOST 3813-72: Textile materials. Textile fabrics and piece-articles. Methods for determination of brearing under tension

GOST 6456-82: Abrasive paper

The Document is Referenced By:

GOST 10642-63: Sole leather. Method for determination of abrasive resistance in air-dry state

GOST 10734-64: Lubricating oils containing additives. Method for determination of detergen potential

GOST 10851-94: Friction articles manufactured from retinax

GOST 11257-65: Mineral oils. Determination of the stability of energy oils using the static method

GOST 11529-2016: Polyvinylchloride materials for floors. Control methods

GOST 11529-86: PVC materials for floors. Methods of control

GOST 11629-2017: Plastics Method for determining the coefficient of friction

GOST 11629-75: Plastics. Method of test for coefficient of friction

GOST 12.4.242-2013: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods

GOST 12172-2016: Phenol-polyvinylacetyl adhesives. Specifications

GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications

GOST 12337-84: Motor oils for diesel engines

GOST 12439-79: Abrasive belts and rollers. Dimensions

GOST 12739-85: Knitted fabrics and garments. Method for the determination of abrasion resistance

GOST 13726-78: Aluminium and aluminium alloys strips. Specifications

GOST 13726-97: Aluminium and aluminium alloys strips. Specifications

GOST 14243-78: Paintwork materials. Methods for formation of free films

GOST 16483.39-81: Wood. Method for determination of wear-proofness index

GOST 17177-87: Heat insulating construction materials and products. Methods of control

GOST 17177-94: Thermal insulating materials and products for building application. Test methods.

GOST 17323-71: Engine fuel. Determination of mercaptan and hydrogen sulphide sulphur content by pontentiometric titration

GOST 17367-71: Metals. Method of abrasion test by friction against embedded arrogant grain

GOST 18136-2017: Masla. Metod opredeleniya stabil'nosti protiv okisleniya

GOST 18136-72: Oils. Method for determination of oxidation stability in a universal apparatus

GOST 18351-73: Magnesium alloy extruded rods. Specifications

GOST 18375-73: Lubricating oil 132-08. Specifications

GOST 18482-2018: Aluminium and aluminium alloy extruded tubes. Specifications

GOST 18482-79: Aluminium and aluminium alloy extruded pipes. Specifications

GOST 19245-93: Perambulators. General specifications

GOST 19538-74: Putty ЗЗК-3у. Specifications

GOST 19657-84: Magnesium alloy pressed profiles. Specifications

GOST 19686-74: Vacuum oils. Method for assessing the quality of the ultimate residual pressure

GOST 20354-74: Oils for aircraft gas-turbine engines. Method for determination of evaporation loss in evaporating cups

GOST 20458-2022: Grease Torsiol-55. Specifications

GOST 20458-89: Grease Torsiol-55. Specifications

GOST 20502-75: Oils and additives to them. Methods for determination of corrodibility

GOST 21443-75: Liquefied hydrocarbon gases for export

GOST 21488-76: Extruded bars of aluminium and aluminium alloys

GOST 21488-97: Pressed bars of aluminium and aluminium alloys. Specifications

GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications

GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.

GOST 22776-77: Products, made of the abrasive paper

GOST 23.212-82: Products wear resistance assurance. The method of testing materials for wear under shock under law temperature conditions

GOST 23175-78: Lubricating oils. Method for determination of motor properties and thermal-oxidative stability

GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods

GOST 23652-79: Transmission oils

GOST 23797-79: Oil for aircraft gas turbine engines. Method for the determination of thermo oxidizing stability in oil volume

GOST 25.601-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for tensile properties on plane specimens at normal, elevated and law temperatures

GOST 25.602-80: Design calculation and strength testing. Methods of mechanical testing of polymeric composite materials. Test for compression properties at normal, elevated and low temperatures

GOST 25149-82: The liquid N7. Specifications

GOST 26149-84: Sheet floor covering on the base of chemical fibres. Specifications

GOST 27181-86: Abrasive cloth and paper for hardworking materials.

GOST 27265-87: Titanium and titanium-alloy filling wire

GOST 27891-88: Polymer protective coatings for insulation, localization, deactivation and accumulation. Method for determination of stripping quality

GOST 28089-2012: Wall masonry constructions. Test methods for bond strength of facing tiles with the base

GOST 28089-89: Wall masonry constructions. Test method for bond strength of facing tiles with the base

GOST 28379-89: Putties ЭП-0010 and ЭП-0020. Specifications

GOST 29104.17-91: Industrial fabrics. Method for determination of surface abrasion resistance

GOST 29104.8-91: Industrial fabrics. Method for determination of strength and strength under ball forcing

GOST 2917-76: Oils and additives. Method of test for corrosion influence on metals

GOST 30513-97: Abrasive and diamond tools. Test methods for safety

GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST 31537-2012: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST 32618.1-2014: Plastics. Thermomechanical analysis (TMA). Part 1. General principles

GOST 5170-73: Repair kits for pneumatic tyres. Specifications

GOST 5734-76: Greases method for the determination of oxidation stability

GOST 6321-92: Engine fuels. Method for copper strip test

GOST 8617-2018: Pressed sections of aluminium and aluminium alloys. Specifications

GOST 8617-81: Pressed sections out of aluminium and aluminium alloys. Specifications

GOST 8674-58: Petroleum products. Determination of fractional composition by evaporation method

GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property

GOST 9.504-85: Unified system of corrosion and ageing protection. Materials of packing on paper base. Method of testing protective capability

GOST 9.508-89: Unified system of corrosion and ageing protection. Means of temporary rust protection of metals. Method of protective ability evaluation under the action of hand sweat

GOST 9.509-89: Unified system of corrosion and ageing protection. Means of temporary corrosion protection. Methods of determining protection ability

GOST 9.913-90: Unified system of corrosion and ageing protection. Aluminium, magnesium and alloys. Methods of accelerated corrosion test

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 981-75: Mineral oils. Method for determination of oxidation stability

GOST 9972-74: Petroleum turbine oils with additives

GOST R 12.4.239-2007: Occupational safety standards system. Additional protective footwear for works with radioactive and chemically toxic substances. General technical requirements and test methods

GOST R 51049-97: Fire engineering. Fire pressure hoses. General technical requirements. Test methods

GOST R 51104-97: Exported liquefied hydrocarbon gases from Russian region. Specifications

GOST R 52021-2015: Epoxy resins and related materials. Methods for determination of chlorine mass fraction

GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods

GOST R 53191-2008: Wheelset assembly for locomotives and motor-powered units using shrink fit method. Typical technological process

GOST R 53264-2009: Fire equipment. Special clothing for fire-fighter. General technical requirements. Test methods

GOST R 53264-2019: Fire fighting equipment. Firefighter's clothes are special protective. General technical requirements. Test methods

GOST R 53410-2009: Grinding wheels for portable grinders. Specifications

GOST R 53542-2009: Aviation engines and their components. Brazing of high-alloy steels in vacuum. General requirements for technological process

GOST R 54892-2012: Installation of air separation plants and other cryogenic equipment. General provisions

GOST R 55436-2013: Gas distribution systems. Coatings with extruded polyethylene on steel pipes. General technical requirements

GOST R 56282-2014: Aluminum alloy extruded large solid sections. Specifications

GOST R 70286-2022: Trunk pipeline transport of oil and petroleum products. Composite composition and sealant for composite-coupling repair. General specifications

I 1.09-10: Instructions for connecting insulated conductors of wires and cables

Instruction CV/3429: Instructions for inspection, survey, repair and formation of wagon wheelsets

Manual for SNiP 3.05.01-85: Manual for the production and acceptance of work when installing ventilation and air conditioning systems

MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations

NPB 152-96: Fire hose. General technical requirements. Test Methods

NPB 161-97*: Special protective clothing for firefighters against increased heat. General technical requirements. Test methods

ODM 218.2.047-2014: Method for assessing the durability of geosynthetic materials used in road construction

ODM 218.5.006-2010: Recommendations on testing methods for geosynthetic materials, depending on their field of application in the road sector

OST 1 90113-86: Pressed sections of aluminium alloys. Specifications.

OST 1 92096-83: Cold worked seamless pipes of aluminium alloys. Specifications.

OST 26-3-87: Welding in chemical mechanical engineering. Main provisions.

OST 37.002.1153-86: Typical technological process sealing isolation and braiding at the ends of electrical wires. Main provisions.

OST 92-1586-89: Marking paints. General requirements for selection, preparation and laying.

OST 92-9440-81: Conducting lacquer coating. Technical requirements and typical technological processes.

PI 1.2.315-89: Production of glazing parts from organic glasses

RD 112 RSFSR-023-89: Guidelines. GSE. Capacity technological pipelines. Measurement Technique

RD 153-34.0-45.510-98: Model Guidelines for Operation and Repair of Slip Rings and Brushes of Turbine Generators with Power of 63 MW and Above

RD 153-34.1-43.204-2001: Petroleum-Based and Fireresistant Turbine Oils. Quantitative Method for the Determination of Anticorrosion Properties

RD 31.52.04-90: Polymer adhesive compositions. Application in ship repair. Technological requirements

RD 34.10.102-91: Specified Quantity Allowances for Means of Mechanization, Special Accessories, and Tools for Overhaul of Main Energy Equipment of Thermal Power Stations

RD 34.10.103: Industry-Specific Specified Quantity Allowance for Tools, Equipment, Materials, and Aids for Repair and Rehabilitation of Gas Cleaning Equipment of Thermal Electric Powers

RD 34.10.351: Specified Quantity Allowances for Materials for Repair of Turbine Generators

RD 34.10.354-88: Transformers Consumption of materials for repair

RD 34.20.322-89: Procedural Guidelines for Inspection of Smokestacks with Metal Gas Discharge Flues

RD 34.21.623-96: Procedural Guidelines for Inspection of Metal Structures of Fuel Supply Trestles

RD 34.45.614: Guide to Overhaul of Turbine Generators TVF-120-2 and TVF-100-2

RD 34.46.605: Transformers at Voltage of 110-1150 kV, with Power of 80 MVxA and Above

RD 34.47.602-75: Guidelines for the overhaul of the VMD-35 oil circuit breaker

RD 34.47.603-79: Guidelines for the overhaul of high-voltage three-pole circuit breakers VMPE-10

RD 34.47.612-86: Guidelines for the overhaul of VT-35-630-10VI and VTD-35-630-10VI oil circuit breakers

RD 34.47.613-74: Guidelines for the overhaul of the oil circuit breaker VMP-10P

RD 51-553-94: Instructions for technical certification of gas accumulators GSS-1-1-10,0-25U-001 during the operation of gas filling stations of gas compressor stations (AGNKS)

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

RM 4-249-91: Process automation systems. Device grounding networks. Allowance for the BCH 205-84/MMSS USSR

TU 2513-001-00152081-93: Glues 51-K-10V. Technical specifications

TU 38.1011299-2006: IPM 10 aviation oil

TU 6-02-I-015-89: Silicone adhesive sealant Elastosil 137-182 heat-conducting

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English
Price: $1,060.25
imgalt
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English
Price: $198.62
imgalt
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English
Price: $41.00
imgalt
Diesel fuel EURO. Specifications
Language: English
Price: $233.00
imgalt
Inch thread with a profile angle of 55 degrees
Language: English
Price: $121.00
imgalt
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English
Price: $178.00
imgalt
Norms of structural design of nuclear power plants with reactors of different types
Language: English
Price: $12.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!