GOST R 51691-2008
ГОСТ Р 51691-2008
|
|
Paint materials. Enamels. General specifications
Материалы лакокрасочные. Эмали. Общие технические условия
Status: Effective
The standard applies to paints and varnishes of the enamel type used to paint various surfaces, and establishes general requirements for them. The standard does not apply to enamels used for finishing furniture made from wood and wood materials, enamels used in construction, conservation enamels (group 3 according to GOST 9825) and special-purpose enamels (group 5 according to GOST 9825).
Стандарт распространяется на лакокрасочные материалы вида эмали, применяемые для окрашивания различных поверхностей, и устанавливает общие требования к ним. Стандарт не распространяется на эмали, применяемые для отделки мебели, изготовленной из древесины и древесных материалов, эмали, применяемые в строительстве, консервационные эмали (группа 3 по ГОСТ 9825) и эмали специального назначения (группа 5 по ГОСТ 9825).
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/25/2008
SKU: RUSS61626
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
87 Paint and varnish industry »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.3 Products of paint and varnish industry »
ISO classifier »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National standards »
87 PAINT AND VARNISHING INDUSTRY »
87.040 Paints and varnishes »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L2 Organic Chemical Products »
L24 Varnish and enamel »
As a Replacement Of:
GOST R 51691-2000: Paint materials. Enamels. General specifications
The Document References:
Federal Law 184-FZ: About technical regulation
GN 2.1.6.1338-03: Maximum allowable concentrations (MACs) of pollutants in the air of residential areas
GN 2.1.6.2309-07: Tentative safe exposure levels (TSELs) of pollutants in the air of residential areas
GN 2.2.5.1313-03: Maximum allowable concentrations (MACs) of harmful substances in occupational air
GN 2.2.5.2308-07: Chemical factors of production environment. Tentative safe exposure levels (TSEL) for harmful substances in the air of the working zone
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.016-79: Work area air
GOST 12.1.044-89: Fire and explosion hazard of substances and materials. Nomenclature of indices and methods of their determination
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.005-75: Painting works
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 13526-79: Electrical insulating varnishes and enamels. Methods of tests
GOST 15140-78: Paintwork materials. Methods for determination of adhesion
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 19007-73: Paintwork materials. Method for determination of drying time and degree
GOST 20214-74: Electrical conductive plastics. Test method for determination of specific volume electrical resistance at d.c. voltage
GOST 20811-75: Paintwork materials. Methods for coating abrasion test
GOST 21903-76: Paint materials. Methods of relative light-fastness determination
GOST 25271-93: Plastics. Resins in the liquid state or as emulsions or dispersions. Determination of apparent viscosity by the Brookfield method
GOST 27037-86: Paint materials. Method of determination of stability to temperature changes
GOST 27271-87: Paints and varnishes. Method for control of working life
GOST 28246-2006: Paint materials. Terms and definitions
GOST 28513-90: Paints and varnishes. Method for determination of density
GOST 29309-92: Coating of lacquers and paints. Determination of strength under the tension
GOST 29319-92: Paints and varnishes. Visual comparison of the colour of paints
GOST 4765-73: Pain and lacquer materials. Method of determination impact resistance
GOST 5233-89: Paint materials. Method for determination of coating hardness pendulum instrument
GOST 6806-73: Paint and lacquer materials. Method for determination of film elasticity in bending
GOST 8420-74: Paint and lacquer materials. Method for determination of relative viscosity
GOST 8784-75: Paint materials. Methods for determination of hiding power
GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing
GOST 896-69: Paints and varnishes. Photoelectrical method for determination of gloss of coatings
GOST 9.072-77: Unified system of corrosion and ageing protection. Paint coating. Terms and definitions
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9.403-80: Unified system of corrosion and ageing protection. Paint coatings. Test methods for resistance to liquid static effect
GOST 9.407-84: Unified system of corrosion and ageing protection. Paint coatings. Method of appearance rating.
GOST 9825-73: Paint materials. Terms, definitions and designations
GOST 9980.1-86: Paint materials. Rules of acceptance
GOST 9980.2-86: Paint materials. Test sampling
GOST 9980.3-86: Paint materials. Packing
GOST 9980.4-2002: Paint materials. Marking
GOST 9980.5-86: Paint materials. Transportation and storage
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 50500-93: Paints and varnishes. Bend test (conical mandrel)
GOST R 51691-2000: Paint materials. Enamels. General specifications
GOST R 52166-2003: Paints and varnishes. Determination of hardness by pendulum damping test
GOST R 52362-2005: Safety of paint materials. Terms and definitions
GOST R 52487-2005: Paint materials. Determination of non-volatile-matter mass fraction
GOST R 52663-2006: Paint materials. Method for determination of gloss of non-metallic paint films at 20°, 60° and 85°
GOST R 52740-2007: Paint materials. Method for determination of film strength while bending around cylindrical mandrel
GOST R 52753-2007: Paint materials. Method for determination of fineness of grind
GOST R 53007-2008: Paint materials. Rapid deformation (impact resistance) test method
PB 09-540-03: General codes on explosion protection for explosive and fire hazardous chemical, petrochemical plants and oil refineries
PB 09-567-03: Safety Requirements for Production Facilities for Paints and Related Materials
SanPiN 2.1.6.1032-01: Hygienic requirements to quality assurance of atmospheric air in inhabited areas
SanPiN 2.1.7.1322-03: Hygienic requirements regarding dumping and decontamination of industrial and consumable waste
SP 2.2.2.1327-03: Hygienic regulations for organization of technological processes, production equipment and working instrument
SP 991-72: Sanitary regulations when painting using manual sprayers
The Document is Referenced By:
Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation
Customers Who Viewed This Item Also Viewed:
 |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.