GOST R 52502-2005
ГОСТ Р 52502-2005
|
|
Venetian blinds-rollets. General specifications
Жалюзи-роллеты. Общие технические условия
Status: Not effective - Superseded. Information about the registration of 11-st from 02.22.2012; IUS 4-2013
This standard applies to newly developed and upgraded protective shutters-shutters of mechanical and electromechanical design, which include a web assembled from movably fastened profiles moving up and down along guide rails and wound on the shaft with a drive. Roller shutters are designed to be installed in window, door, garage and other openings of buildings and structures in order to prevent unauthorized access to the premises, property preservation and personal security. The standard establishes the classification of roller shutters, technical requirements, safety requirements, acceptance rules, control methods, manufacturer's warranty. This standard does not apply to security shutters according to GOST R 51222; structures: fireproof; open area fences; intended for military and (or) defense facilities, as well as for special industrial production
Настоящий стандарт распространяется на вновь разрабатываемые и модернизируемые защитные жалюзи-роллеты механической и электромеханической конструкции, составной частью которых является полотно, собранное из подвижно скрепленных между собой профилей, перемещающееся вверх - вниз по направляющим шинам и наматываемое приводом на вал. Жалюзи-роллеты предназначены для установки в оконных, дверных, гаражных и иных проемах зданий и сооружений с целью предотвращения несанкционированного доступа в помещения, сохранности имущества и обеспечения безопасности личности. В стандарте установлены классификация жалюзи-роллет, технические требования, требования безопасности, правила приемки, методы контроля, гарантии изготовителя. Настоящий стандарт не распространяется на защитные жалюзи по ГОСТ Р 51222; конструкции: противопожарные; ограждения открытых территорий; предназначенные для объектов военного и (или) оборонного значения, а также для специальных промышленных производств
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/30/2005
SKU: RUSS61647
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.310 Crime protection »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.310 Crime protection »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh34 Metal structures and parts »
The Document is Replaced With:
GOST R 52502-2012: Venetian metals blinds-rollets. Specifications
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Federal Law 184-FZ: About technical regulation
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12969-67: Plates for machines and devices. Technical requirements
GOST 12971-67: Rectangular plates for machines and devices. Dimensions
GOST 14.201-83: Provision of technological efficiency of products design. General requirements
GOST 14192-96: Cargo marking
GOST 15.309-98: System of product development and launching into manufacture. Test and acceptance of produced goods. Principal positions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 20.39.108-85: General requirements complex system. Human factors, inhabitancy and technical aesthetics requirements. Nomenclature and order of choice
GOST 23170-78: Packing for products of engineering industry. General requirements.
GOST 27.003-90: Reliability in engineering. Make-up and general rules for assigning reliability requirements
GOST 28653-90: Small-arms. Terms and definitions
GOST 30.001-83: The system of ergonomic and technical design standards. General principles
GOST 3242-79: Welded joints
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8026-92: Levelling rules. Specifications
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 1.12-2004: Standardization in the Russian Federation. Terms and definitions
GOST R 50862-2005: Safes and strong rooms. Requirements and methods of tests for resistance to burglary and fire
GOST R 51110-97: Equipment for bank protection. General technical requirements
GOST R 51112-97: Equipment for bank protection. Bullet-proof requirements and test methods
GOST R 51113-97: Equipment for bank protection. Requirements for resistance to burglary and test methods
GOST R 51221-98: Equipment for bank protection. Terms and definitions
GOST R 51222-98: Equipment for bank protection. Venetian blinds. General specifications
GOST R 52161.1-2004: Safety of household and similar electrical appliances. Part 1. General requirements
GOST R 52503-2005: Venetian blinds-rollets. Methods of testing for resistance to burglary and bullet-proofing
STB 51.2.03-2000: Equipment and facilities for banking. Burglar retardant and bullet-proof rolls. Classification. General technical requirements and test methods
The Document is Referenced By:
GOST 538-2014: Locks and building hardware. General specifications
GOST R 50776-95: Alarm systems. Part 1. General requirements. Section 4. Code of practice
GOST R 52502-2012: Venetian metals blinds-rollets. Specifications
GOST R 52503-2005: Venetian blinds-rollets. Methods of testing for resistance to burglary and bullet-proofing
GOST R 53704-2009: Complex and integrated security systems. General technical requirements
GOST R 54834-2011: Equipment for bank protection. Mobile cash operation terminals. General technical requirements
R 78.36.033-2013: Application monitoring and comparative analysis of testing various types of window units, blinds, security grilles and glazing. Classification, methods of installation and strengthening of the structure. Guidelines
RM 005-2018: Analytical review. Search for technical solutions for the remote blocking of weapons storage rooms of legal entities connected to central monitoring panels of private security units
VNP 001-01: Industry-Specific Design Standards. Buildings for Territorial Main Administrations, National Banks, and Clearing Centers of the Russian Federation Central Bank
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
