GOST R 9.518-2006
ГОСТ Р 9.518-2006
|
|
Unified system of corrosion and ageing protection. Temporary corrosion protection during assembling operations. General requirements
Единая система защиты от коррозии и старения. Межоперационная противокоррозионная защита. Общие требования
Status: Effective - Introduced for the first time
This standard establishes general requirements for the protection against corrosion of metal blanks from semi-finished products, parts and assembly units during their manufacture and inter-operational storage for a period not exceeding one year
Настоящий стандарт устанавливает общие требования к защите от коррозии металлических заготовок из полуфабрикатов, деталей и сборочных единиц в процессе их изготовления и межоперационного хранения на срок не более одного года
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
10/31/2006
SKU: RUSS61795
The Product is Contained in the Following Classifiers:
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Documentation »
Welding regulations »
Welding work »
Soldering »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Main materials »
Non-ferrous metals »
Standards for pipe fittings (TPA) »
10. Production »
10.7 Coatings »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
2 Tests for external factors »
2.1 General requirements for tests on external factors »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
ISO classifier »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.01 Surface treatment and coating in general »
National standards »
25 MECHANICAL ENGINEERING »
25.220 Surface treatment and coating »
25.220.01 Surface treatment and coating in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
T General technical and organizational and methodological standards »
T9 Unified system of protection against corrosion and aging of materials and products »
T95 Paintwork and other polymer coatings »
The Document References:
Federal Law 184-FZ: About technical regulation
GOST 12.0.004-90: Organization of training for labor safety. General rules
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.1.016-79: Work area air
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 12.3.025-80: Occupational safety standards system. Metal working by cutting. Safety requirements
GOST 12.4.009-83: Fire-fighting equipment for protection of units. Basic types. Location and maintenance
GOST 12.4.020-82: Occupational safety standards safety. Means for personal protection of hands. Nomenclature of quality indices
GOST 12.4.028-76: Respirators шб-1 "lepestok"
GOST 12.4.068-79: Occupational safety standards system. Dermatologic personal safety means. Classification and general requirements
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 17.2.3.02-78: Regulations for establishing permissible emissions of noxious pollutants from industrial enterprises
GOST 17.5.1.03-86: Nature protection. Lands. Classification of overburden and enclosing rocks for biological recultivation of lands
GOST 23216-78: Electrotechnical products. Storage, transportation, temporary corrosion protection and packing. General requirements and test methods
GOST 24927-81: Electronic products. General requirements to the temporary corrosion protection and test methods
GOST 27597-88: Electronics items. Corrosion resistance evaluation method
GOST 3.1603-91: Unified system for technological documentation. Rules of making documents on technological processes (operations) of collection and delivery of technological waste
GOST 5272-68: Corrosion of Metals. Terms
GOST 6243-75: Emulsols and pastes. Test methods
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.054-75: Unified system of corrosion and ageing protection. Anticorrosive oils, greases and inhibited film-forming petroleum compounds. Accelerated test methods of protective property
GOST 9.085-78: Single corrosion and ageing protection system. Cooling lubricant. Bioresistance test methods
GOST 9.102-91: Unified system of corrosion and ageing protection. Influence of biological factors on technical objects. Terms and definitions
GOST 9.103-78: Unified system of corrosion and ageing protection. Temporary prevention of metal and products. Terms and definitions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9.311-87: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Method of corrosion damage evaluation
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9.504-85: Unified system of corrosion and ageing protection. Materials of packing on paper base. Method of testing protective capability
GOST 9.508-89: Unified system of corrosion and ageing protection. Means of temporary rust protection of metals. Method of protective ability evaluation under the action of hand sweat
GOST 9.509-89: Unified system of corrosion and ageing protection. Means of temporary corrosion protection. Methods of determining protection ability
GOST 9.510-93: Unified system of corrosion and ageing protection. Aluminium and aluminium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage
GOST 9.511-93: Unified system of corrosion and ageing protection. Magnesium alloys semifinished products. General requirements for temporary anticorrosive protection, packing, transportation and storage
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
GOST R 12.4.013-97: Occupational safety standards system. Goggles. General specifications
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 50558-93: Industrial purity. Lubricating and cooling liquids. Specifications
GOST R 9.517-2003: Unified system of corrosion and ageing protection. Temporary rust protection of products. Test methods
SanPiN 2.1.5.980-00: Water diposal at inhabitted points. Sanitary protection of water bodies. Hygienic requirements to surface waters protection
SP 2.1.7.1386-03: Determining hazard class toxic production consumption waste
The Document is Referenced By:
GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.
GOST R 58934-2020: Plants for the manufacture of reinforced concrete volume blocks of sanitary cabins and elevator shafts. Specifications
Customers Who Viewed This Item Also Viewed:
 |
Jet fuels
Language: English |
State system for ensuring the uniformity of measurements. Measurements of liquids and gases flow rate and quantity by means of orifice instruments. Part 5. Measurement procedure
Language: English |
Four-wheel bogies of freight cars for mainline railways gauge 1520 (1524) mm. Specifications
Language: English |
Petroleum products. Method for measurement of viscosity by automatic capillar viscosimeter
Language: English |
Greases. Method for determination of ultimate strength and thermostrengthening
Language: English |
Technical ethylcellosolve. Specifications
Language: English |
Railway rolling stock. Devices to prevent running gear parts from dropping to the track. Methods of controlling strength characteristics
Language: English |
Electric heating devices for heating rolling stock railways. Safety requirements and test methods
Language: English |
Ice cream. General technical requirements
Language: English |
Locomotives The method of dynamic strength tests
Language: English |
Pipe fittings. Ball valves made of brass. General specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.