GOST 25165-82
ГОСТ 25165-82
|
|
Connections of SSI instruments and devices with external pneumatic lines. Types, basic parameters and dimensions. Technical requirements
Соединения приборов и устройств ГСП с внешними пневматическими линиями. Типы, основные параметры и размеры. Технические требования
Status: Effective. The limitation of effectiveness has been lifted: Protocol No. 2-92 of the IGU dated 05.10.92 (IUS 2-1993)
The standard applies to the connection of instruments and devices of the State System of Industrial Instruments and Automation Equipment (GSP) with external pipelines designed for the transmission of pneumatic signals and power energy. The standard establishes the types, basic parameters and sizes of sockets and connections, as well as their technical requirements. The standard does not apply to connections of elements and pneumatic automation units mounted inside the device or cabinet and not directly connected to external command and supply lines, as well as to connections with external pipelines with conditional passages less than 4 mm.
Стандарт распространяется на соединения приборов и устройств Государственной системы промышленных приборов и средств автоматизации (ГСП) с внешними трубопроводами, предназначенными для передачи пневматических сигналов и энергии питания. Стандарт устанавливает типы, основные параметры и размеры гнезд и соединений, а также технические требования к ним. Стандарт не распространяется на соединения элементов и блоков пневмоавтоматики, монтируемых внутри корпуса прибора или шкафа и не имеющих непосредственной стыковки с внешними командными и питающими линиями связи, а также на соединения с внешними трубопроводами с условными проходами менее 4 мм.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of the USSR,
3/10/1982
SKU: RUSS61890
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
3 Activities of testing laboratories »
3.2 Technical equipment of testing laboratories »
3.2.2 Measuring instruments and test equipment »
3.2.2.1 Basic requirements for instruments and test equipment »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.040 Pipelines and their components »
23.040.60 Flanges, couplings and connections »
National Standards for KGS (State Standards Classification) »
Latest edition »
P Measuring devices. Automation and computing facilities »
P0 General rules and regulations for instrument-making industry »
P04 Details and components of general application in instrument making »
National Standards for OKSTU »
GENERAL PURPOSE INSTRUMENTS AND AUTOMATION »
General rules and regulations »
The Document References:
GOST 1051-73: Calibrated quality steel
GOST 12997-84: SSI Products. General specifications
GOST 1414-75: Construction steel with enhanced and high machinability
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 17617-72: Tapes from flexible polyvinyl chloride
GOST 18475-82: Cold-worked aluminum and aluminum alloy pipes
GOST 19034-82: Tubes of polyvinylchloride plastic. Specifications
GOST 21858-78: Threaded pipeline connections. End unions. Construction
GOST 23353-78: Threaded pipeline connections. Cartive nut. Construction
GOST 23354-78: Threaded pipeline connections. Cut ring. Construction
GOST 23358-78: Fittings made on the thread. Sealing packings. Dimensions. Technical requirements
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 5496-78: Rubber technical tubes. Specifications
GOST 6111-52: Conical pipe thread. Profile, basic dimensions and tolerances
GOST 617-90: Copper tubes. Specifications
GOST 9567-75: Precision steel tubes. Range
The Document is Referenced By:
GOST 12997-84: SSI Products. General specifications
GOST 13053-76: Ssi pneumatic instruments and devices
GOST 13093-81: Gas analyzers. Dimensions for threaded joints and hose couplings
GOST 13373-67: Actuating pneumatic diaphragm-spring straight motion mechanisms SSI. Types. Basic parameters and dimensions
GOST 13717-84: Pressure-operated indicating electrical-contact instruments
GOST 14753-82: Indicating and recording pneumatic monitoring instruments of ssi
GOST 16920-93: Manometric thermometers and temperature transducers
GOST 18140-84: SSI differential pressure gauges. General specifications.
GOST 22520-85: Pressure, pressure difference and vacuum transmitters with electrical analog output signals gsp
GOST 22521-85: Pressure, vacuum and pressure difference transmitters with pneumatic analogue output signal of gsp (state system of industrial devices and automation systems)
GOST 23382-78: Piezosorption hygrometers. General specifications
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST 25164-82: Connections of SSI instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 25164-96: Connections of instruments and devices with external hydraulic and gas lines. Types, basic parameters and dimensions. Technical requirements
GOST 26055-84: Manipulators for construction and erection works
GOST 28723-90: Velocity, electromagnetic and vortex flow meters
GOST 28725-90: Instruments for measuring the level of liquids and loose materials
GOST 9986-78: SSI. Electropneumatic analogue transducers. General specifications
GOST 9988-84: Pneumatic regulator devices of SSI. General specifications
GOST R 50759-95: Gas analyses for control of industrial and transport emissions. General specifications
GOST R 50760-95: Gas and aerosol analysers for air pollution monitoring. General specifications
GOST R 52931-2008: Instruments for process monitoring and control. General specifications
GOST R 8.758-2011: State system for ensuring the uniformity of measurements. Coulometric hygrometers. General specifications
IM 14-4-2004: Automation. Instruments for measuring and controlling flow and quantity. Directory
SNiP 3.05.07-85: Automated systems
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
