GOST 19862-87
ГОСТ 19862-87
|
|
Pneumatic drives. Methods of measuring parameters
Пневмоприводы. Методы измерений параметров
Status: Valid - Only in the Russian Federation
This standard applies to pneumatic tires for cars, light trucks, trucks, trailers for them, buses, trolleybuses and establishes a method for determining the forces and rolling resistance coefficients in the laboratory at the drum stands with the measurement of the path and run out time
Настоящий стандарт распространяется на пневмоприводы и пневмоустройства с номинальным давлением до 1,6 МПа и устанавливает методы и средства измерений параметров, значения которых изменяются со скоростью не более 10% номинального в секунду, применяемые при контрольных испытаниях. Стандарт не распространяется на пневмоприводы и устройства тормозных систем транспортных средств, а также на ручные машины
Choose Language:
Format: Electronic (pdf/doc)
Approved: USSR State Committee for Standards,
11/3/1987
SKU: RUSS61911
The Product is Contained in the Following Classifiers:
Standards for pipe fittings (TPA) »
12. Standards for components for piping valves (TPA) »
12.1 Driving Devices »
12.1.3 Drives »
12.1.3.2 Pneumatic actuators »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.100 Volumetric hydraulic actuators and pneumatic actuators »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.100 Volumetric hydraulic actuators and pneumatic actuators »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.100 Volumetric hydraulic actuators and pneumatic actuators »
23.100.01 Volumetric hydraulic actuators and pneumatic actuators in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.100 Volumetric hydraulic actuators and pneumatic actuators »
23.100.01 Volumetric hydraulic actuators and pneumatic actuators in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G1 General parts and units of machines »
G17 Hydraulic, pneumatic and lubricating devices for general use »
National Standards for OKSTU »
PRODUCTS FOR GENERAL ENGINEERING APPLICATIONS »
Pneumatic drives and pneumatic automation »
As a Replacement Of:
GOST 19862-74: Pneumatic drives. Methods of measuring parameters
The Document References:
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.005-76: Occupational safety standards system. Working zone air. General hygiene requirements
GOST 12.1.026-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in a free-field over reflecting plane. Engineering method
GOST 12.1.027-80: Occupational safety standards system. Noise. Determination of noise characteristics of noise sources in reverberation room. Engineering method
GOST 12.1.028-80: System of the standards for safety of work
GOST 12.1.034-81: Occupational safety standards system. Vibration. General requirements for measurements
GOST 12.2.003-74: Occupational safety standards system. Industrial equipment. General safety requirements
GOST 12.2.012-75: Occupational safety standards system. Devices to ensure the safety of works. General requirements
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.3.002-75: Occupational safety standards system. Manufacturing processes. General safety requirements
GOST 17168-82: Octave and one-third-of-octave electronic filters
GOST 17187-81: Noise meters
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18140-84: SSI differential pressure gauges. General specifications.
GOST 21339-82: Tachometers
GOST 215-73: Mercury glass laboratory thermometers. Specification
GOST 22527-77: Secondary electric clocks. General specifications
GOST 23676-79: Balance for static weighing capacity limits. Metrological parameters
GOST 23711-79: Balance for static weightings. General technical requirements
GOST 23941-79: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 24104-80: General purpose and reference laboratory balances. General specifications
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 2648-78: SSI. Traction meters, pressure gauges and tension gauges. General specifications
GOST 5072-79: Mechanical stop-watches. Specification
GOST 6111-52: Conical pipe thread. Profile, basic dimensions and tolerances
GOST 6616-74: Converters thermoelectric SHG. General specifications
GOST 6651-84: Thermal converters of GSP resistance. General specifications
GOST 7164-78: SSI self-balancing servoinstruments. General specifications
GOST 8.002-86: State system for ensuring the uniformity of measurements. State supervision and department control of measuring instruments. Basic regulations
GOST 8.051-81: State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 8.401-80: State system for ensuring the uniformity of measurements. Accuracy classes of measuring instruments. General requirements
GOST 8.513-84: State system for ensuring the uniformity of measurements. Verification of measuring instruments. Organization and procedure
GOST 8.549-86: The state system of ensuring the uniformity of measurements. Permissible errors of measurement of linear dimensions to 500 mm with non-specified tolerances
GOST 8624-80: Manometric thermometers GSP. General specifications
GOST 9177-74: Thermometers of glass, liquid (correct). General specifications
The Document is Referenced By:
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 25531-82: Lubricators. Specifications
GOST 26053-84: Industrial robots. Acceptance rules. Methods of test
GOST 26059-89: Industrial robots. Pneumatic motors of actuating mechanisms. Types, basic parameters and mounting dimensions
GOST 26699-98: Underground drilling rigs. General specifications and test methods
GOST 26917-2000: Underground loading machines. General technical requirements and test methods
GOST 30526-97: Pneumatic fluid power. Compressed air dryers. General technical requirements and test methods
GOST 30539-97: Pneumatic fluid power. Quick-action couplings for nominal pressures 1,0; 1,6 and 2,5 MPa. Connecting dimensions, technical requirements and test methods
GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods
GOST R 52218-2004: Shaft sinking winches. General technical requirements and test methods
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R 55159-2012: The mountain-mine equipment. Underground loading machines. General technical requirements and test methods
GOST R 55162-2012: Mining equipment. Pneumatic hammers. Safety requirements and test methods
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Metals. Methods of tension test
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
Natural gas for industrial and municipal purposes. Technical conditions
Language: English |
Global navigation satellite system. Emergency response system in case of accidents. Test methods for emergency services call device/system for compliance with the requirements for the quality of loudspeaker communication in the vehicle cab.
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
