imgalt

GOST 28013-89

ГОСТ 28013-89

Mortars. General specifications

Растворы строительные. Общие технические условия

Status: Not effective - Superseded. IUS 5-1999

The standard applies to mortars used for masonry, installation of building structures, facing and plastering in various operating conditions. The standard does not apply to heat-resistant, chemically resistant and straining solutions. The standard establishes the technical requirements for mortars and materials for their preparation, as well as the rules for acceptance and control of the quality indicators of the solution and the rules for transportation.

Стандарт распространяется на растворы строительные, применяемые для каменных кладок, монтажа строительных конструкций, облицовочных и штукатурных работ в различных эксплуатационных условиях. Стандарт не распространяется на растворы жаростойкие, химически стойкие и напрягающие. Стандарт устанавливает технические требования к растворам строительным и материалам для их приготовления, а также правила приемки и контроля показателей качества раствора и правила транспортирования.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: USSR State Building Committee, 1/13/1989

SKU: RUSS61978

Price: $633.26



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » k.62 Concretes and mortars »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.10 Cement. Gypsum. Lime. Building mixture »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh13 Concretes and mortars »

National Standards for OKSTU » CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS » Lime, gypsum and other local binders »


The Document is Replaced With:

GOST 28013-98: Mortars. General specifications

The Document References:

GOST 10178-85: Portland cement and portland blastfurnace slag cement. Specifications

GOST 10223-97: Weighing batchers of periodic operation

GOST 10690-73: Technical potassium carbonate (potash). Technical conditions

GOST 10834-76: Hydrophobizing liquid 136-41. Specifications

GOST 125-79: Gypsum binders. Specifications

GOST 12966-85: Aluminum sulfate technical purified. Technical conditions

GOST 15825-80: Coloured Portland cement. Specifications

GOST 18172-80: Yellow iron oxide pigment

GOST 19906-74: Sodium nitrite technical. Technical conditions

GOST 2081-92: Carbamide

GOST 23732-79: Water for concretes and mortars. Specifications

GOST 24211-91: Concrete additives. General technical requirements

GOST 25328-82: Masonry cement. Specifications.

GOST 25818-91: Thermal plant fly-ashes for concretes. Specifications

GOST 26644-85: Slag crushed stone and slag sand fly-ash for concrete. Specifications

GOST 28498-90: Liquid-in-glass thermometers

GOST 3476-74: Slags domain and electrothermophosphoric granulated for the production of cements

GOST 4.233-86: Product-quality index system. Building. Mortars. Index nomenclature

GOST 450-77: Calcium chloride technical. Technical conditions

GOST 5802-86: Mortars. Test methods.

GOST 6318-77: Sodium sulfate technical. Technical conditions

GOST 8.469-82: State system for ensuring the uniformity of measurements. Scale weighers of continuous action. Methods and means of verification

GOST 8135-74: Iron minimum. Specifications

GOST 8736-93: Sand for construction works. Specifications

GOST 9179-77: Lime for building purposes. Specifications

GOST 9757-90: Artificial porous gravel, crushed stone and sand artificially produced expanded/foamed gravel, crushed rock and sand]. Specifications

MI 1540-91: State system for ensuring uniformity of measurements. Dispensers weight discrete action. Method of verification

OST 13-287-85: Technical modified lignosulfonates (ЛТСМ). Specifications.

TU 6-00-5763450-129-91: Technical ferric chloride

TU 6-01-1001-75: Sulfonol powder

TU 6-01-1026-75: Catapin bactericide

TU 6-02-995-80: Modifiers. Mark 113-63 (B.FES-50) and 113-65 (B.FES-80)

TU 6-05-1857-78: Methyl cellulose, water soluble

TU 6-18-194-76: Calcium chloride inhibited by calcium nitrite nitrate (HHHC)

The Document is Referenced By:

GOST 25592-91: Mixes of fly-ash and slag of thermal plants for concretes. Specifications

GOST 28013-98: Mortars. General specifications

GOST 30459-2008: Admixtures for concretes and mortars. Determination and estimate of the efficiency

GOST 31358-2007: Dry building flooring cement binder mixes. Specifications

GOST R 56178-2014: Modifiers of organic-mineral origin of MB type for concretes, mortars and dry mixes. Specifications

MDS 12-5.2000: Gosgortekhnadzor of Russia Employee's Manual for Quality Control of Construction and Installation Work

RDS 10-201-94: Execution Procedures for Preparation of Drafts of Standards in Minstroy of Russia

RDS 82-201-96: Rules for the development of material consumption norms in construction

SP 23-101-2000: Design of thermal performance of buildings

SP 23-101-2004: Design of thermal protection of buildings

TR 118-01: Technical recommendations. Materials and production technologies for cleaning the facades of buildings and engineering structures

TR 85-98: Technical recommendations on input quality control of materials used for facade finishing

TR 94.06-99: Standard Procedure for Operational Quality Control of Construction, Installation, and Military Construction Work During Construction of Buildings and Structures. 06: Finishing Work

TR 95.11-99: Standard Procedure for Construction and Installation Practices for Erection of Buildings and Structures. 11: Exterior Painting

TU 5851-008-01388383-2002: Reinforced concrete beams with frame fittings for the superstructure of road bridges and overpasses with a length of 12, 15 and 18 m. Specifications

VSN 33-95: Guidelines for Use of Chemical Admixtures in Cement Grouts for Erection of Residential and Public Occupancies in Winter

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!