imgalt

GOST R ISO 6157-2-2009

ГОСТ Р ИСО 6157-2-2009

Fasteners - Surface discontinuities - Part 2: Nuts

Изделия крепежные. Дефекты поверхности. Часть 2. Гайки

Status: Not effective - Canceled. Registration information 689-st dated 06/27/2016 (official website of Rosstandart); IUS 1-2017

This standard establishes the permissible limit values for various types of surface defects of nuts: - with a nominal thread diameter of 5 to 39 mm inclusive; - accuracy classes A and B; - strength classes according to ISO 898-2 and ISO 898-6, unless otherwise defined in product standards or by agreement between the manufacturer and the customer

Настоящий стандарт устанавливает допустимые предельные значения для различных типов дефектов поверхности гаек: - с номинальным диаметром резьбы от 5 до 39 мм включительно; - классов точности A и B; - классов прочности по ИСО 898-2 и ИСО 898-6, если иначе не определено в стандартах на продукцию или соглашением между изготовителем и заказчиком

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Federal Agency for Technical Regulation and Metrology, 12/10/2009

SKU: RUSS62101

Price: $264.33

English keywords: fasteners; nuts; surface defects;


imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 21 Mechanical systems and general purpose devices »

Evidence base (TR CU, Technical Regulation of the Customs Union) » 010/2011 TR CU. On safety of machinery and equipment » Regulations and standards (to ТР ТС ТС 010/2011) »

Standards for pipe fittings (TPA) » 13. Standards for basic components and parts of injection molding machines » 13.2 Fasteners »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.10 Bolts, screws, studs »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.10 Bolts, screws, studs »

ISO classifier » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.20 Nuts »

National standards » 21 MECHANICAL SYSTEMS AND GENERAL PURPOSE DEVICES » 21.060 Fasteners » 21.060.20 Nuts »

National Standards for KGS (State Standards Classification) » Latest edition » G Machines, equipment and tools » G3 Fasteners for general engineering applications » G33 Nuts »


The Document References:

Federal Law 184-FZ: About technical regulation

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions

GOST R 52628-2006: Nuts. Mechanical properties and test methods

GOST R ISO 2320-2009: Prevailing torque type steel nuts - Mechanical and performance properties

GOST R ISO 3269-2009: Fasteners. Acceptance inspection

The Document is Referenced By:

GOST 11532-2014: Nuts for rail joints. Specifications

GOST 32484.3-2013: High-strength structural bolting assemblies for preloading. System HR - Hexagon bolt and nut assemblies

GOST 32484.4-2013: High-strength structural bolting assemblies for preloading. System HV - Hexagon bolt and nut assemblies

GOST ISO 4032-2014: Hex Nuts, normal (type 1). Precision classes A and B

GOST ISO 4033-2014: Hex Nuts high (type 2). Precision classes A and B

GOST ISO 4035-2014: Nuts hexahedral, low, chamfered (type 0). Precision classes A and B

GOST ISO 4036-2014: Nuts, hexagonal, low without bevel (type 0). Accuracy class B

GOST ISO 7040-2014: Nuts Hex normal self-stopped (with non-metallic insert), type 1. Strength class 5, 8 and 10

GOST ISO 7041-2014: Nuts Hex high self-stopped (with non-metallic insert), type 2. Strength class 9 and 12

GOST ISO 7043-2014: Nuts Hex high self-stopped with flange (with non-metallic insert), type 2. Precision classes A and B

GOST ISO 7719-2014: Hex nuts, normal, self-stopping, all metal (Type 1). Strength class 5, 8 and 10

GOST ISO 7720-2014: Hex nuts, high, self-stopping, all metal (Type 2). Strength class 9

GOST ISO 8673-2014: Hexagon regular nuts (style 1) with fine pitch thread. Product grades A and B

GOST ISO 8674-2014: Nuts hexahedral high (type 2) with a fine-pitch thread. Precision classes A and B

GOST ISO 8675-2014: Nuts hexahedral low chamfered (type 0) with fine pitch thread. Precision classes A and B

GOST R 52643-2006: High-strength screws and nuts washers for metal structures. General specifications

GOST R 52645-2006: Hexagon nuts for high-strength structural bolting with large width across flats. Specifications.

GOST R 53664-2009: High-strength cheese-head and conical bolts for bridge building. Nuts and washers for them. Specifications

GOST R 53682-2009: Fired heaters for refineries. General technical requirements

GOST R 53819-2010: Vehicles. Fastenings wheels. Technical requirements and test methods

GOST R 54786-2011: Fastening parts for detachable connections of nuclear power plants. Specifications.

GOST R 58249-2018: Machines for planting, harvesting, post-harvest processing of potatoes. Technical requirements

GOST R ISO 10484-2010: Widening test on nuts

GOST R ISO 3269-2009: Fasteners. Acceptance inspection

GOST R ISO 4161-2013: Hexagon nuts with flange, style 2. Coarse thread

GOST R ISO 7042-2011: Prevailing torque type all-metal hexagon nuts, style 2. Property classes 5, 8, 10 and 12

GOST R ISO 898-2-2013: Mechanical properties of fasteners made of carbon steel and alloy steel. Part 2. Nuts with specified property classes with coarse thread and fine pitch thread

GOST R ISO 8992-2011: Fasteners. General requirements for bolts, screws, studs and nuts

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Seamless hot-deformed steel pipes. Specifications
Language: English
Price: $57.42
imgalt
Seamless hot-deformed steel pipes. Range of sizes
Language: English
Price: $77.22
imgalt
Processing equipment and process pipelines
Language: English
Price: $155.43
imgalt
Instructions on Designing of Steel Process Piping, Рnom up to 10 MPa
Language: English
Price: $320.76
imgalt
Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
Language: English
Price: $262.35
imgalt
Federal norms and rules in the field of the use of atomic energy. Valves for nuclear power plants. General technical requirements
Language: English
Price: $1,478.07
imgalt
Unified system for design documentation. Diagrams. Kinds and types. General requirements for fulfillment.
Language: English
Price: $121.77
imgalt
Chemically resistant and heat resistant ceramic wares. The method for determination of heat resistance
Language: English
Price: $34.65
imgalt
Unified system for program documentation. Types of programs and program documents
Language: English
Price: $55.44
imgalt
Petroleum products. Method of test for water-soluble acids and alkalies
Language: English
Price: $48.51
imgalt
Unified system for design documentation. Repair documents
Language: English
Price: $196.02
imgalt
Chemical production safety passport. General requirements
Language: English
Price: $90.09
imgalt
Unified system for design documentation. Exploitative documents
Language: English
Price: $296.01
imgalt
Unified system for design documentation. Types and sets of design documentation
Language: English
Price: $137.61
imgalt
Food products. Methods for detection and quantity determination of coagulase-positive staphylococci and Staphylococcus aureus
Language: English
Price: $223.74
imgalt
Process piping. Standard for the stress, vibration and seismic analysis
Language: English
Price: $879.12
imgalt
Pipeline valves for nuclear stations. General specifications
Language: English
Price: $1,908.72
imgalt
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $703.89
imgalt
Valves of pipeline technological systems of nuclear power plants, not affecting safety. General technical requirements
Language: English
Price: $523.71
imgalt
Fish products. Canned tuna and bonito in water or oil
Language: English
Price: $159.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!