GOST 23747-88
ГОСТ 23747-88
|
|
Doors of aluminium alloys. Specifications
Двери из алюминиевых сплавов. Общие технические условия
Status: Not effective - Superseded. Registration information 2037-st dated 12.12.2014 (official website of Rosstandart) (IUS 7-2015)
The standard applies to doors made of aluminum alloys of the climatic version of UHL of any category of placement, except the fifth, according to GOST 15150, of any group of operating conditions for products with a UHL paint-and-lacquer coating according to GOST 9.104. The doors are designed for installation in external and internal vertical building envelopes. The standard does not apply to doors in which aluminum alloys are not the main structural material, as well as to doors for special purposes (with increased requirements for fire safety, smoke protection, sound and heat insulation and tightness).
Стандарт распространяется на двери из алюминиевых сплавов климатического исполнения УХЛ любой категории размещения, кроме пятой, по ГОСТ 15150, любой группы условий эксплуатации для изделий с лакокрасочным покрытием УХЛ по ГОСТ 9.104. Двери предназначены для установки в наружных и внутренних вертикальных строительных ограждающих конструкциях. Стандарт не распространяется на двери, в которых алюминиевые сплавы не являются основным конструкционным материалом, а также на двери специального назначения (с повышенными требованиями к пожаробезопасности, дымозащите, звуко- и теплоизоляции и герметичности).
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Council of Ministers of the USSR for Construction,
6/15/1988
SKU: RUSS62119
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
k.56 Windows, doors, gates and their appliances »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.060 Construction elements »
91.060.50 Doors and windows »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh34 Metal structures and parts »
The Document is Replaced With:
GOST 23747-2014: Door blocks of aluminium profiles. Specifications
GOST 23747-2015: Door blocks of aluminium profiles. Specifications
As a Replacement Of:
GOST 23747-79: Doors of aluminium alloys. Specifications
The Document References:
GOST 10354-82: Polyethylene film Specifications
GOST 1050-88: Carbon structural quality steel gauged bars with special surface finish. General specifications
GOST 12085-88: Concentrated natural chalk. Specifications
GOST 12172-74: Phenol-polivinylacetyl adhesives. Specifications
GOST 13489-79: Sealants, marks У-30M and УТ-31. Specifications
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15907-70: Varnishes ПФ-170 and ПФ-171. Specifications
GOST 16338-85: Low-pressure polyethylene. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17308-88: Twines. Specifications
GOST 19729-74: Ground talc for manufacture of rubber products and plastics. Specifications
GOST 21631-76: Sheets of aluminium and aluminium alloys. Specifications
GOST 22233-2001: Aluminium alloy extruded sections for translucent envelopes. General specifications
GOST 23616-79: System of ensuring of geometrical accuracy of parameters in construction. Control of accuracy
GOST 23832-79: Varnishes AK-113 and AK-113Ф. Specifications
GOST 26254-84: Buildings and structures. Methods of determination of thermal resistance of enclosing structures
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 31167-2003: Buildings and structures. Methods for determination of air permeability of building envelope in field conditions
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 538-2001: Locks and building hardware. General specifications
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8273-75: Packing paper
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.031-74: Unified system of corrosion and ageing protection. Anode-oxide coatings for semifinished products made out of aluminium and alloys. General requirements and methods of control
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.104-79: Unified system corrosion of corrosion and ageing protection. Paint coatings. Croups of operation conditions
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9.303-84: Unified system of corrosion and ageing protection. Metallic and non-metallic inorganic coatings. General requirements for selection
GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.
GOST 9378-93: Roughness comparison specimens
GOST 9569-79: Paraffin paper
SNiP 2.01.07-85: Loads and impacts
SNiP 2.03.11-85: Corrosion protection of buildings structures
The Document is Referenced By:
TU 5270-001-44991977-97: Aluminum Alloy Windows and Doors
TU 5271-001-48810984-00: Window structures made of aluminum alloys for fencing balconies and loggias
|
Customers Who Viewed This Item Also Viewed:
 |
Preservative oil K-17
Language: English |
Jet fuels
Language: English |
Chill moulds. Ventilation channels. Dimensions
Language: English |
Additive АКОР-1. Specifications
Language: English |
Laminated glued wood. Methods for determination of ultimate and modulus of elasticity in static bending
Language: English |
Ceramic brick and stone. General specifications
Language: English |
Microbiology of food and animal feeding stuffs. Methods for detection and enumeration of sulphite-reducing bacteria growing under anaerobic conditions
Language: English |
Maximum admissible amounts of chemical substances, emitting from the packaging materials into food products
Language: English |
System of design documents for construction. Rules for execution of the working documentation of architectural and construction solutions
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.