GOST 31625-2012

ГОСТ 31625-2012

Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

Лента и проволока из специальных сплавов для соединительных и вживляемых элементов изделий для сердечно-сосудистой хирургии. Общие технические условия

Status: Effective - Introduced for the first time. IUS 9-2013

This standard applies to cold-rolled strip with a thickness of 0.10-2.0 mm and cold-drawn wire with a diameter of 0.1-6.0 mm from special alloys of grades 40KHNM and 48KHVN, intended for the manufacture of connecting elements (brackets for stapling blood vessels, artificial valve frameworks ) cardiovascular system, as well as other implantable elements used in surgery (brackets for the imposition of mechanical seams on organs and tissues, implant, etc.)

Настоящий стандарт распространяется на ленту холоднокатаную толщиной 0,10-2,0 мм и проволоку холоднотянутую диаметром 0,1-6,0 мм из специальных сплавов марок 40КХНМ и 48КХВН, предназначенные для изготовления соединительных элементов (скобок для сшивания кровеносных сосудов, каркасов искусственных клапанов) сердечно-сосудистой системы, а также других вживляемых элементов, используемых в хирургии (скобок для наложения механических швов на органы и ткани, имплантат и др.)

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Federal Agency for Technical Regulation and Metrology, 11/1/2012

SKU: RUSS62169

Price: $212.00




The Product is Contained in the Following Classifiers:

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.13 Testing and control of products of engineering industry » 4.13.2 Machines and equipment for special purposes » 4.13.2.11 Equipment and instruments for medical industry »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 11 HEALTH » 11.040 Medical equipment » 11.040.40 Implants for surgery, prosthetics and orthoptics »

National standards » 11 HEALTH » 11.040 Medical equipment » 11.040.40 Implants for surgery, prosthetics and orthoptics »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »


The Document References:

GOST 10354-82: Polyethylene film Specifications

GOST 10396-84: Crepe cable paper

GOST 10446-80: Wire. Tensile test method

GOST 11358-89: Dial-type thickness gauges and dial-type wall thickness gauges graduated in 0,01 and 0,1 mm. Specifications

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 12344-2003: Alloyed and high-alloyed steels. Methods for determination of carbon

GOST 12345-2001: Alloyed and high-alloyed steels. Methods of sulphur determination

GOST 12346-78: Alloyed and high-alloyed steels. Methods of silicon determination

GOST 12347-77: Alloyed and high-alloyed steels. Methods for determination of phosphorus

GOST 12348-78: Alloyed and high-alloyed steels. Methods of manganese determination

GOST 12349-83: Alloyed and high-alloyed steels. Methods for determination of tungsten

GOST 12350-78: Alloyed and high-alloyed steels. Methods of chromium determination

GOST 12352-81: Steels alloyed and highalloyed. Methods for the determination of nickel

GOST 12353-78: Alloyed and high-alloyed steels. Methods of cobalt determination

GOST 12354-81: Steels alloyed and highalloyed. Methods for the determination of molybdenum

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14118-85: Wire made of precision alloys, designed for elastic elements

GOST 14192-96: Cargo marking

GOST 14253-83: Unwoven stitched wiping rags. Specifications

GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications

GOST 166-89: Vernier callipers. Specifications

GOST 1778-70: Steel. Metallographic methods for the determination of non-metallic inclusions

GOST 19300-86: Instruments for measurement of surface roughness by the profile method. Contact profilographs and profilometers. Types and main parameters

GOST 20799-88: Industrial oils Specifications

GOST 21650-76: Means of fastening tared and break bulk cargoes in the loads units. General requirements

GOST 24597-81: Unitized tared and piece goods cargoes. Main parameters and dimensions

GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements

GOST 2771-81: Cold-drawn round wire. Gauge

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 29095-91: Nickel-based precision, corrosion-resistant, heat-resistant alloys and powders. Methods of iron determination

GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications

GOST 3282-74: General-purpose low-carbon steel wire. Specifications

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 4381-87: Lever-type micrometers. General specifications

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 6507-90: Micrometers. Specifications

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 8828-89: Base paper and two-layer waterproof packaging paper

GOST 9569-2006: Paraffined paper. Specifications

Customers Who Viewed This Item Also Viewed:

Man-machine system. Operator's arm-chair. General ergonomic requirements
Language: English
Price: $73.00
Traction railway stock wheelsets of 1520 mm gauge railways. General specifications
Language: English
Price: $137.00
Special railway rolling stok. Dynamic and strength testing procedures
Language: English
Price: $198.00
Safety of machinery. Guards. General requirements for the design and construction of fixed and movable guards
Language: English
Price: $332.00
Safety of machinery. Interlocking devices associated with guards. Principles for design and selection
Language: English
Price: $436.00
Seismic building design code
Language: English
Price: $594.00
Conformity assessment. The procedure for conducting inspection control in certification procedures
Language: English
Price: $491.82

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!