GOST 19906-74
ГОСТ 19906-74
|
|
Sodium nitrite technical. Technical conditions
Нитрит натрия технический. Технические условия
Status: Effective - Supersedes. The limitation of effectiveness has been lifted: Protocol No. 5-94 of the IGU dated 05.17.94 (IUS 11-12-1994)
The standard applies to technical sodium nitrite, intended as an inhibitor for protection against atmospheric corrosion and for other purposes in the chemical, metallurgical, medical, pulp and paper and other industries.
Стандарт распространяется на технический нитрит натрия, предназначенный в качестве ингибитора для защиты от атмосферной коррозии и длядругих целей в химической, металлургической,медицинской, целлюлозно-бумажной и других отраслях промышленности.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of Standards of the Council of Ministers of the USSR,
6/28/1974
SKU: RUSS62264
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.9 Testing and control of chemical and industrial products »
4.9.1 Products of main chemical industries »
ISO classifier »
71 CHEMICAL INDUSTRY »
71.060 Inorganic chemicals »
71.060.50 Salts »
National standards »
71 CHEMICAL INDUSTRY »
71.060 Inorganic chemicals »
71.060.50 Salts »
National Standards for KGS (State Standards Classification) »
Latest edition »
L Chemical products and rubber-asbestos products »
L1 Inorganic chemical products »
L14 Salt »
National Standards for OKSTU »
INORGANIC CHEMICAL PRODUCTS, MINING CHEMICAL RAW MATERIALS AND FERTILIZERS »
Salts of nitric and nitrous acids »
The Document is Replaced With:
GOST 19906-2023: Sodium nitrite technical. Technical conditions
As a Replacement Of:
GOST 5.1077-71: Sodium nitrate (sodium nitrite). Quality requirements for certified products
GOST 6194-69: Sodium nitrous acid (sodium nitrite), technical
The Document References:
GOST 10163-76: Reagents. Soluble starch. Specifications
GOST 12.1.005-88: General sanitary requirements for working zone air
GOST 12.4.021-75: Ventilation systems. General requirements
GOST 14192-77: Marking of cargoes
GOST 14919-83: Household electric ranges, electric plates and electric frying ovens
GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications
GOST 18300-87: Technical rectified ethyl alcohol. Specifications
GOST 19433-88: Dangerous goods. Classification and marking
GOST 20288-74: Reagents. Carbon tetrachloride. Specifications
GOST 20490-75: Reagents. Potassium permanganate. Specifications
GOST 2226-88: Paper bags
GOST 24104-88: General purpose and reference laboratory balances
GOST 25336-82: Laboratory glassware and equipment. Basic parameters and dimensions
GOST 25794.2-83: Reagents. Methods for preparation of standard volumetric solutions for redox titration
GOST 25794.3-83: Reagents. Methods of preparation of standard volumetric solutions for precipitation titration, non-aqueous titration and other titrimetric methods
GOST 26319-84: Dangerous cargoes
GOST 26663-85: Transport packets. Formation by packaging means. General technical requirements
GOST 27068-86: Reagents. Sodium thiosulphate 5-aqueous. Specifications
GOST 29227-91: Laboratory glassware. Graduated pipettes. Part 1. General requirements
GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 4148-78: Reagents. Ferrous (II) sulphate 7-aqueous. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4232-74: Reagents. Potassium iodide. Specifications
GOST 4328-77: Reagents. Sodium hydroxide. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 4517-87: Reagents. Methods for preparation of accessory reagents and solutions used for analysis
GOST 4520-78: Reagents. Mercury (II) nitrate monohydrate. Specifications
GOST 4919.1-77: Reagents and matters of special purity. Methods for preparation of indicators solutions
GOST 5955-75: Reagents. Benzene. Specifications
GOST 5959-80: Uncollapsable wooden sheet material boxes for weights to 200 kg mass. General specifications
GOST 6691-77: Reagents. Urea. Specifications
GOST 6709-72: Distilled water. Specifications
GOST 6995-77: Reagents. Methanol-poison. Specifications
The Document is Referenced By:
GOST 11884.17-82: Tungsten concentrate. Spectrum method of determination of calcium oxide content
GOST 16295-2018: Anticorrosive paper. Specifications
GOST 16295-82: Packing anticorrosive paper. Specifications
GOST 17053.2-80: Inserts for ship shock absorbers АКСС-М. Specifications
GOST 17366-80: Welded thick-walled steel barrels for chemical products
GOST 17519-87: Rectangular electromagnetic chucks
GOST 18160-72: Fasteners. Packing. Marking. Transportation and storage
GOST 20019-74: Sintered hard metals. Determination of cross-bending strength
GOST 20223-74: Spray guns for pneumatic spraying. General specifications
GOST 24211-91: Concrete additives. General technical requirements
GOST 25820-83: Lightweight concrete. Specifications
GOST 28013-89: Mortars. General specifications
GOST 28328-89: Round electromagnetic chucks
GOST 30273-98: Circular and rectangular electromagnetic chucks. General specifications
GOST 31383-2008: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST 6247-79: Steel welded barrels with rolling hoops on the shell
GOST 7199-77: Rubber-metallic ship bearings. Specifications
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.047-75: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9.305-84: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Technological process operations for coating production
GOST 9.402-80: Metal surface preparation for painting
GOST R 50.05.06-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of examination. Unified procedures. Magnetic particles examination
GOST R 52804-2007: Protection against corrosion of concrete and reinforced concrete constructions. Test methods
GOST R 54653-2011: Organic fertilizers. Methods of microbiological analysis
GOST R 70638-2023: Pipeline valves. Degreasing methods
Manual: Manual for impulse and low consumption fire extinguishing systems
MU 34-70-106-85: Procedural Guidelines for Preservation of Standby Equipment of Stationary Electric Power Generating Stations
ODM 218.2.017-2011: Guidelines Design, construction and operation of roads with low traffic
ODM 218.6.021-2019: Guidelines for the use of clean low-temperature deicing materials for winter road maintenance
ONTP 14-93: Standards for the technological design of engineering, instrument-making and metal-working enterprises (refinement of ONTP-14-93). Mechanical processing assembly shops
OSN-APK 2.10.32.001-04: Instructions for the use of chemical additives in concrete and mortars for rural construction
OST 108.020.131-85: Steam, Gas and Hydraulic Turbines. General requirements for conservation.
OST 108.988.01-82: Preservation of items of boiler production. Lubricants, inhibitors. Technical requirements.
OST 26-07-2065-85: Quality control program for nuclear thermal power plant special fittings.
OST 26-2044-83: Butt and corner welded joint seams of pressure-operated vessels and devices. Ultrasonic control method.
OST 37.001.219-79: Fittings for rubber metal products. Technical requirements
OST 4.054.035-78: Spring elements from alloys of ferrous and non-ferrous metals. Heat treatment. Typical Processes
OST 5R.9527-94: Pipes and products of general purpose marine systems. Cleaning and preservation (before installation). Typical processes.
PNAE G-7-015-89: Uniform methods of inspection of main materials (semi-finished products), welded joints and building-up of the equipment and piping of nuclear power units. Magnetic particle inspection
PND F 16.1:2:2.2:3.77-2013: Method for measuring the mass fraction of vanadium in soils, soils, bottom sediments, production and consumption wastes by the photometric method with phosphoric acid and sodium tungstate
RD 12.13.055-87: Instructions for the preparation and use of concrete and mortar for mining coal mines
RD 153-34.0-37.411-2001: Procedural Guidelines for In-Service Steam-Oxygen Cleaning and Passivation of Inner Surfaces of Power Generating Equipment
RD 24.207.09-90: Pipe fittings. Temporary anti-corrosion protection. General requirements
RD 302-07-275-89: Pipe fittings. Metallic and non-metallic inorganic coatings. Typical technological processes
RD 34.10.407: Specified Quantity Allowances for Reagents for Pre-Startup and Operating Chemical Cleaning of Thermal Energy Equipment of Electric Power Generating Stations
RD 34.17.440-96: Procedural Guidelines for Assessment of Individual Service Life of Steam Turbines and Prolongation of Their Operational Life Beyond the Individual Service Life of Steam Turbines and Prolonging Their Operational Life Beyond The Equipment Service Life
RD 50-664-88: Guidelines. Metallic and non-metallic inorganic coatings. Electrolyte preparation and correction methods
Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope
RSN 342-86: Technology for reinforcing building structures in reconstructed enterprises
RSN I-89: Recommendations for the use of concretes with complex antifrosty additives for monolithic structures erected in the Yakut ASSR at negative temperatures
RSN-88: Design and Construction of Roads and Highways in Non-Chernozem Areas of the RSFSR
RU 1.2.1.14.001-2012: Guidance for the repair of concrete, reinforced concrete constructions and hydrotechnical constructions of nuclear power plant stations
SNiP 3.03.01-87: Bearing and enclosing structures
SNiP 3.06.04-91: Bridges and pipes
SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87
ST RK 1647-2007: Railway transport. Magnetic particles method of non-destructive control of car parts
ST RK 2823-2016: Industrial explosives Poremit-1. Technical conditions
ST TsKBA 015-2005: Pipe fittings. The program of quality control of fittings of nuclear power plants
ST TsKBA 046-2007: Pipe fittings. Degreasing methods
ST TsKBA 061-2010: Pipe fittings. Temporary anti-corrosion protection. General requirements for the choice of means and methods of protection
ST TsKBA 105-2012: Pipe fittings. Metallic and non-metallic inorganic coatings. Technological process
TR 80-98: Recommended Practice for Concrete Laying Process by Unheated Method of Cast-in-Place Structures Using Thermos and Accelerated Thermos
TU 26-01-355-80: Electrolyzers. Type of SPP with component equipment
TU 36-1496-85: Cable prefabricated structures. Technical conditions
VRD 66-66-83: Recommendations for the centralized preparation of mortar with antifreeze additives to monitor its quality
VSN 09-79/USSR Minselstroy: Departmental instruction on the use of chemical additives in concrete and mortars for rural construction
VSN 104-93: Design and Installation Standards for Waterproofing for Subway Tunnels Constructed Using Opencast Method
VSN 212-91: Use of Natural-Porous-Aggregate Concrete in Transportation Tunnel Construction
VSN 26-76/Gosgrazhdanstroj: Temporary instruction on the non-heated creation of seams and joints in large-panel residential buildings
VSN 33-95: Guidelines for Use of Chemical Admixtures in Cement Grouts for Erection of Residential and Public Occupancies in Winter
VSN 362-87: Disinfections and Etching of Pipelines
VSN 46-96: Instruction on preparation and use of concrete with sodium nitrite additive in winter conditions
VSN 83-92: Technical instructions for the use of concrete and cement-sand mortars hardening in the frost, in the construction of artificial structures
|
Customers Who Viewed This Item Also Viewed:
 |
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
