GOST 9045-93

ГОСТ 9045-93

Cold-rolled thin sheets of low-carbon steel for cold stamping. Specifications

Прокат тонколистовой холоднокатаный из низкоуглеродистой качественной стали для холодной штамповки. Технические условия

Status: Valid - Supersedes

The standard applies to sheet products of low-carbon quality steel with a thickness of up to 3.9 mm, intended for cold forming.

Стандарт распространяется на тонколистовой прокат из низкоуглеродистой качественной сталитолщиной до 3,9 мм, предназначенный для холодной штамповки.

Choose Language: 
Format: Electronic (pdf/doc)
Page Count: 16

Approved: Gosstandart of Russia, 2/20/1996

SKU: RUSS62287

Price: $94.05




The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

Standards for pipe fittings (TPA) » 10. Production » 10.2 Billets (forgings, stampings, rolling, castings, etc.) »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.4 Iron and steel products »

ISO classifier » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National standards » 77 METALLURGY » 77.140 Iron and steel products » 77.140.20 Stainless steels »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V33 Sheets and Stripes »

National Standards for OKSTU » FINISHED ROLLED STEELS (INCLUDING BILL FOR EXPORT) » Thin-sheet steel with a thickness of 1 to 1.8 mm »


As a Replacement Of:

GOST 9045-80: Low carbon cold-rolled quality steel sheets for cold stamping. Specifications

The Document References:

GOST 10510-80: Metals. Erikson test method for sheets and strips extrusion

GOST 11701-84: Metals. Methods of tensile testing of thin sheets and strips

GOST 19904-90: Cold-rolled steel sheets. Dimensions

GOST 21014-88: Rolled products of ferrous metals. Surface defects. Terms and definitions

GOST 22536.0-87: Carbon steel and unalloyed cast iron. General requirements for methods of analysis

GOST 22536.10-88: Carbon steel and unalloyed cast iron. Methods for determination of alluminium

GOST 22536.1-88: Carbon steel and unalloyed cast iron. Methods for determination of general carbon and graphite

GOST 22536.2-87: Carbon steel and unalloyed cast iron. Methods for the determination of sulfur

GOST 22536.3-88: Carbon steel and unalloyed cast iron. Methods for determination of phosphorus

GOST 22536.4-88: Carbon steel and unalloyed cast iron. Methods for determination of silicon

GOST 22536.5-87: Carbon steel and unalloyed cast iron. Methods for determination of manganese

GOST 22975-78: Metals and alloys. Rockwell hardness test under low loads (using Super-Rockwell test)

GOST 2789-73: Surface roughness. Parameters and characteristics

GOST 5639-82: Steel and alloys. Methods for detection and determination of grain size

GOST 5640-68: Steel. Metallographic method for determination of microstructure of sheets and bands

GOST 7564-97: Rolled products general rules of samples, rough specimens and test pieces selection for mechanical and technological testing

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 7566-94: Metal products

GOST 9013-59: Metals. Method of measuring Rockwell hardness

GOST 9045-80: Low carbon cold-rolled quality steel sheets for cold stamping. Specifications

The Document is Referenced By:

GOST 10503-71: Oil paints, ready for use. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 10707-80: Steel cold shaped electrically welded tubes technical conditions

GOST 11066-74: Thermostable silicoorganic lacquers and enamels. Specifications

GOST 11249-80: Steel rolled up soldered double-layer tubes

GOST 12644-80: Hollow and semi-hollow rivets. Specifications

GOST 13663-86: shaped steel pipes technical requirements

GOST 14918-80: Continuously galvanized sheet steel. Technical conditions.

GOST 1577-93: Plate and broadband roll stock of construction fine steel.

GOST 19851-74: Ribbon from carbon cold-rolled cut steel

GOST 24045-94: Steel shaped sheets with trapezoid corrugations for construction

GOST 24244-2018: Сold rolled low carbon steel sheet for enameling. Specifications

GOST 24244-80: Cold-rolled soft thin sheet steel for enameled utensils

GOST 30630.2.5-2013: Test methods for resistance to climatic external influencing factors for machines, instruments and other industrial products. Tests on the effects of salt spray

GOST 30765-2001: Metal transport packagings. General specifications

GOST 31311-2005: Heating devices. General specifications

GOST 31846-2012: Special Rolling Stock. Requirements for Bearing Structure Strength and for Dynamic Properties

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 32935-2014: Steel bellows expansion joints for heat networks. General specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 33260-2015: Pipeline valves. Мetals used in pipeline valves production. Basic requirements for choice of materials

GOST 34180-2017: Steel cold and cold rolled hot-galvanized sheet with polimer coating, prepainted by the continuous coil-coating process. Specifications

GOST 34233.4-2017: Vessels and apparatus. Norms and methods of strength calculation. Calculation of the strength and tightness of flange connections

GOST 34347-2017: Steel welded vessels and apparatus. General technical conditions

GOST 34649-2020: Cold-rolled steel thin-sheet products, galvanized with polymer coating from continuous lines. Specifications

GOST 5037-97: Metal cans for milk and dairy products

GOST 503-81: Cold-rolled low-carbon steel strip. Specifications

GOST 5105-82: Steel fuel and oil tanks

GOST 64-77: Enamels ГФ-230 BЭ. Specifications

GOST 8292-85: Oil and paste color paints

GOST 8832-76: Paintwork materials. Methods for formation of paint coating for testing

GOST 9.401-2018: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the influence of climatic factors

GOST 9.401-91: Unified system of corrosion and ageing protection. Paint coatings. General requirements and methods of accelerated tests on resistance to the action of climatic factors.

GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting

GOST R 52146-2003: Cold rolled and cold rolled hot-galvanized sheet with polymer coating, prepainted by the continuous coil-coating process. Specifications

GOST R 52246-2004: Hot-dip zinc-coated steel sheet. Specifications

GOST R 52246-2016: Hot-dip zinc-coated steel sheet. Specifications

GOST R 52630-2006: Steel welded vessels and apparatus. General specifications

GOST R 52630-2012: Steel welded vessels and apparatus. General specifications.

GOST R 52763-2007: Climatic environment stability test methods for machines, instruments and other industrial products. Tests for exposure to salt mist

GOST R 52857.4-2007: Vessels and apparatus. Norms and methods of strength calculation. Stength and leak-tightness calculation of flange joints

GOST R 53337-2009: Special rolling stock. Requirements for bearing structure stength and for dynamic properties

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54301-2011: Cold-rolled electrolyze zinc sheet with polymer coating, repainted by the continuous coil-coating process. Specifications

GOST R 54574-2011: Steel drums for paint materials. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55001-2012: General requirements for performance of chambers for industrial products environments endurance tests. Certification methods for chambers (without load) for salt spray tests

GOST R 55474-2013: Gas distribution systems. Requirements for gas distribution networks. Part 2. Steel gas pipelines

GOST R 55474-2019: Gas distribution systems. Gas distribution networks of natural gas. Part 2. Steel gas pipelines

GOST R 55509-2013: Pipeline valves. Metals used in pipeline valves production. Basic requirements for choice of materials

GOST R 58095.1-2018: Gas distribution systems. Requirements for gas consumption networks. Part 1. Steel gas pipelines

GOST R 58389-2019: Bent steel sheet profiles with trapezoidal corrugations for steel-reinforced concrete structures. Technical specifications

ND 2-020101-124: Rules for the classification and construction of ships

ND 2-020101-124: Part I. Classification

ND 2-020101-124: Part II Body

ND 2-020101-124: Part III. Devices, equipment and supplies

ND 2-020101-124: Part IV Stability

ND 2-020101-124: Part V. Division into compartments

ND 2-020101-124: Part VI. Fire protection

ND 2-020101-124: Part VII. Mechanical installations

ND 2-020101-124: Part VIII. Systems and pipelines

ND 2-020101-124: Part IX. The mechanisms

ND 2-020101-124: Part X. Boilers, heat exchangers and pressure vessels

ND 2-020101-124: Part XI. Electrical equipment

ND 2-020101-124: Part XII. Refrigeration units

ND 2-020101-124: Part XIII. Materials

ND 2-020101-124: Part XIV. Welding

ND 2-020101-124: Part XV. Automation

ND 2-020101-124: Part XVI. Design and strength of ship hulls made of polymer composite materials

ND 2-020101-124: Part XVII. Additional characters of the class symbol and verbal characteristics defining the design or operational features of the vessel

OST 26-291-94: Steel welded vessels and devices. General technical requirements.

OTU 3-01: Vessels and apparatuses. General specifications for the repair of buildings

PB 03-384-00: Rules for design, manufacture and acceptance of steel welded vessels and apparatus

RD 26-15-88: Vessels and apparatus. Norms and methods of strength and tightness calculation for flanged joints.

Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 2 (Parts VII-X) (Modified and Supplemented) (2013 Edition)

Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 1 (General Provisions - Parts I-II) (as amended and supplemented) (2013 Edition)

Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 3

Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 1 (Parts III-VI) (with Amendments and Supplements) (2013 Edition)

Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 2 (Parts XI-XIII) (with Amendments and Additions) (2013 Edition)

Rules 2-020101-072: Rules for the Classification and Construction of Sea-Going Ships. Volume 2 (Parts XIV-XVI) (with Amendments and Additions) (2013 Edition)

SP 42-102-2004: Design and construction of gas pipelines from metal pipes. To replace SP 42-102-96

ST TsKBA 005.1-2003: Pipe fittings. Metals used in the valve industry. Part 1. Basic requirements for the choice of materials

TU 14-3R-63-2002: Steel pipes lined with polyethylene pipes. Technical specifications

TU 3612-023-00220302-01: Shell-and-tube heat exchangers with a floating head, shell-and-tube with U-tubes and tube bundles for them

TU 5262-001-23083253-96: Expanded steel sheets. Technical conditions

TU 5285-003-42481025-2006: Cold-formed metal profiles such as "Siding", "Front panel", components and fasteners. Technical conditions

Customers Who Viewed This Item Also Viewed:

Rules of Electrical Installations Design (Russian Electrical Code). 7th Edition. All sections and exhibits
Language: English
Price: $478.76
Foundation bolts. Structure and dimensions
Language: English
Price: $198.99
Pipeline valves. Leakage rates of valves
Language: English
Price: $173.25
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $108.90
Flanges for valves, fittings and pipelines for pressure to PN 250. Design, dimensions and general technical requirements
Language: English
Price: $293.04
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Language: English
Price: $212.85
State system for ensuring the uniformity of measurements. Verification of testing equipment. General principles
Language: English
Price: $121.77
Billet of rotor shafts and rings of turbine generators
Language: English
Price: $1,487.33
Steel building structures. General specifications
Language: English
Price: $250.17
Fencing constructions for translucent buildings and structures. Design rules
Language: English
Price: $609.15
Electromagnetic compatibility of multimedia equipment. Emission requirements
Language: English
Price: $974.64
Non-destructive testing. Method of magnetic particle testing. Standard technological processes
Language: English
Price: $292.05
Supports for Cylindrical and Conical Upright Apparatus. Types and Basic Parameters
Language: English
Price: $573.20
Steel structures
Language: English
Price: $297.00
Hot-rolled sheet. Range
Language: English
Price: $72.27
Obosnovanie bezopasnosti oborudovaniya. Rekomendatsii po podgotovke
Language: English
Price: $67.32
Reinforcing rolled products for reinforced concrete constructions. Specifications
Language: English
Price: $298.98
Tests on electric and optical cables under fire conditions. Part 3-22. Flame spread of vertically-mounted bunched wires or cables. Category A
Language: English
Price: $102.96
Unified system for design documentation. Exploitative documents
Language: English
Price: $150.48
Hexagon head bolts. Product grades A and B
Language: English
Price: $203.94

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!