GOST 12.2.232-2012
ГОСТ 12.2.232-2012
|
|
Occupational safety standards system. Surface drilling equipment. Safety requirements
Система стандартов безопасности труда. Оборудование буровое наземное. Требования безопасности
Status: Effective - Introduced for the first time. IUS 10-2013
This standard establishes safety requirements for the design of drilling equipment. This standard applies to equipment designed for drilling oil and gas wells, as well as wells for other purposes using oil drilling rigs according to GOST 16293. The requirements of this standard do not apply to equipment designed and manufactured before the standard is put into operation. The requirements of this standard are mandatory for certification purposes.
Настоящий стандарт устанавливает требования безопасности к конструкции бурового оборудования. Настоящий стандарт распространяется на оборудование, предназначенное для бурения нефтяных и газовых скважин, а также скважин другого назначения с использованием буровых установок нефтяного ряда по ГОСТ 16293. Требования настоящего стандарта не распространяются на оборудование, спроектированное и изготовленное до момента ввода стандарта в действие. Требования настоящего стандарта являются обязательными для целей сертификации
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
11/21/2012
SKU: RUSS62331
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
75 Extraction and processing of oil, gas and related production »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.4 Machines and equipment for mining, oil industry and quarrying »
ISO classifier »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.10 Equipment for exploration, drilling and production »
National standards »
75 EXTRACTION AND PROCESSING OF OIL, GAS AND RELATED PRODUCTION »
75.180 Equipment for oil and gas industry »
75.180.10 Equipment for exploration, drilling and production »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-2009: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Rules for development, taking over, application, renovation and cancellation
GOST 11928-83: Automated diesels and gas engines systems of alarm-and-warning signaling and protection
GOST 12.1.003-83: Noise. General safety requirements
GOST 12.1.012-2004: Occupational safety stаndards system. Vibration safety. General requirements
GOST 12.1.012-90: SSBT. Occupational Safety Standards System. Vibrational safety. General requirements
GOST 12.2.003-91: Industrial equipment. General safety requirements
GOST 12.2.007.0-75: Occupation safety standards system Electrical equipment. General safety requirements
GOST 12.2.007.14-75: Cables and cable fittings. Safety requirements
GOST 12.2.007.6-75: Occupation safety standards system. Safety requirements. Switching devices for voltages below 1000 v
GOST 12.2.007.6-93: System of labor safety standards Electric commuting apparatuses with the voltage up to 1000 V. Safety requirements.
GOST 12.2.007.8-75: Devices for electric welding and plasma treatment
GOST 12.2.032-78: Operators location in a silting position. General ergonomic requirements
GOST 12.2.033-78: Operators location in a standing position General ergonomic requirements
GOST 12.2.040-79: Positive-displacement hydraulic drives and lubricating systems. General safety requirements for construction
GOST 12.2.062-81: Occupational safety standards system. Industrial equipment. Safety protectors
GOST 12.2.064-81: Occupational safety standards system. Controls of industrial equipment. General safety requirements
GOST 12.2.086-83: Positive displacement hydraulic drives and lubrication systems
GOST 12.2.101-84: Pneumatic drives
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 12.4.026-76: Signal colors and safety signs
GOST 12.4.040-78: Industrial equipment controls
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16293-89: Complete drilling rigs for development and deep exploratory drilling. Basic parameters
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.602-95: Unified system for design documentation. Repair documents
GOST 22789-94: Low-voltage unitized devices
GOST 23941-2002: Noise of machines. Methods for determination of noise characteristics. General requirements
GOST 2405-88: Pressure gauges, vacuum gauges, pressure-vacuum gauges, pressure meters, draft gauges and draft-pressure gauges
GOST R 12.2.141-99: Occupational safety standards system. Surface drilling equipment. Safety requirements
GOST R 12.4.026-2001: Occupational safety standards system. Safety colors, safety signs and signal marking. Purpose and rules of application. General technical requirements and characteristics. Test methods
GOST R 51321.1-2007: Low-voltage switchgear and control gear assemblies. Part 1. Type-tested and partially type-tested assemblies. General technical requirements and test methods
GOST R 51321.2-2009: Low-voltage switchgear and control gear assemblies. Part 2: Particular requirements for busbar trunking systems (busways)
GOST R 51321.3-2009: Low-voltage switchgear and control gear assemblies. Part 3. Particular requirements for low-voltage switchgear and control gear assemblies intended to be installed in places where unskilled persons have access for their use and test methods
GOST R 51321.4-2011: Low-voltage switchgear and control gear assemblies. Part 4. Particular requirements for assemblies for construction sites (ACS)
GOST R 51321.5-2011: Low-voltage switchgear and control gear assemblies. Part 5. Particular requirements for low-voltage assemblies for power distribution in public networks (distribution cabinets and boards)
GOST R 51400-99: Noise of machines. Determination of sound power levels using sound pressure. Engineering methods for small, movable sources in reverberant fields for hard - walls test rooms and for special reverberation test rooms
GOST R 51401-99: Noise of machines. Determination of sound power levels of noise sources using sound pressure. Engineering method in an essentially free field over a reflecting plane
GOST R 51402-99: Noise of machine. Determination of power levels of noise sources using sound pressure. Survey method using an enveloping measurement surface over a reflecting plane
GOST R 52543-2006: Hydraulic drives. Safety requirements
GOST R 52869-2007: Pneumatic drives. Safety requirements
PB 08-624-03: Safety Regulations for oil and gas industry
The Document is Referenced By:
GOST 12.2.088-2017: Standards system of labour safety. Ground equipment for well repair and realization. General safety requirements
Customers Who Viewed This Item Also Viewed:
 |
Building materials. Methods for combustibility test
Language: English |
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English |
Building materials spread flame test method
Language: English |
Clear sheet glass. Specifications
Language: English |
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.