imgalt

GOST 12344-2003

ГОСТ 12344-2003

Alloyed and high-alloyed steels. Methods for determination of carbon

Стали легированные и высоколегированные. Методы определения углерода

Status: Effective - Supersedes. IUS 4-2004

The standard establishes a coulometric method for the determination of gold in gold-platinum alloys.

Стандарт устанавливает кулонометрический метод определения углерода (при массовой доле углерода от 0,002% до 2,00%) и метод инфракрасной спектроскопии (при массовой доле углерода от 0,001% до 2,00%) в легированных и высоколегированных сталях. Допускается определение углерода методом инфракрасной абсорбционной спектроскопии по международному стандарту ИСО 9556-89.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: State Committee of the Russian Federation for Standardization and Metrology, 1/20/2004

SKU: RUSS62335

Price: $132.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Standards » Other state standards used in construction » 77 Metallurgy »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.12 Testing and control of products of metallurgical industry » 4.12.1 Ferrous metals »

ISO classifier » 77 METALLURGY » 77.040 Metal Testing » 77.040.30 Chemical analysis of metals »

National standards » 77 METALLURGY » 77.040 Metal Testing » 77.040.30 Chemical analysis of metals »

National Standards for KGS (State Standards Classification) » Latest edition » V Metals and metal products » V3 Steel quality and high quality (quality stock) » V39 Test methods. Packaging. Marking »

National Standards for OKSTU » ORE RAW MATERIALS, NONMERAL, SECONDARY FERROUS METALLURGY AND COKE » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

The Document References:

GOST 12344-88: Alloyed and high-alloyed steels. Methods of carbon determination

GOST 13610-79: Iron carbonyl for radiotechnical uses. Specifications

GOST 16539-79: Reagents. Cupric oxide. Specifications

GOST 1770-74: Laboratory volumetric glassware. Cylinders, beakers, measuring flasks, test tubes. General specifications

GOST 2603-79: Reagents. Acetone. Specifications

GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis

GOST 29169-91: Laboratory glassware. One-mark pipettes

GOST 29251-91: Laboratory glassware. Burettes. Part 1. General requirements

GOST 4470-79: Reagents. Manganese (IV) oxide. Specifications

GOST 546-2001: Copper cathodes. Specifications

GOST 5583-78: Industrial and medical gaseous oxygen

GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition

GOST 860-75: Tin. Specifications

GOST 9147-80: Laboratory porcelain ware and apparatus. Specifications

The Document is Referenced By:

GOST 34468-2018: Center plates for freight cars of 1520 mm track gauge railways. General specifications

FTS ZhT TsT 028-99: Brake block holders of the locomotives for main-line railways. Certification requirements

GOST 10160-75: Magnetically soft precision alloys

GOST 10543-98: Steel surfacing wire. Specifications

GOST 10702-2016: Rolled high-quality structural non-alloy and alloy steel for cold forging. General specifications

GOST 10702-78: Steel bars, carbon and alloy, structural, for cold extruding and upsetting. Specifications

GOST 10705-80: Electrically welded steel tubes. Specifications

GOST 1071-81: Heat treated steel spring wire

GOST 10884-94: Thermomechanically hardened steel bars for reinforced concrete constructions. Specifications

GOST 10885-85: Hot-rolled two-ply corrosion-resistant steel sheets

GOST 10994-74: Precision alloys. Grades.

GOST 11068-81: Electric-welded pipes from corrosion-resistant steel

GOST 11474-76: Bent-steel sections. Specifications

GOST 12766.2-90: Strip from precision high electric resistance alloys

GOST 12766.3-90: Precision gauged alloys of high electric resistance

GOST 12766.4-90: Graded rolled stock of precision alloys of high electrical resistance

GOST 12766.5-90: Flattened strip of high electric resistance precision alloys

GOST 13663-86: shaped steel pipes technical requirements

GOST 13877-96: Sucker rods and sucker rod couplings. Specifications

GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications

GOST 14117-85: Strip made from precision alloys for elastic elements

GOST 14118-85: Wire made of precision alloys, designed for elastic elements

GOST 14119-85: Rods from precision alloys for elastic elements

GOST 1414-75: Construction steel with enhanced and high machinability

GOST 14959-2016: Spring nonalloy and alloy steel product. Specifications

GOST 14963-78: Doped steel spring wire

GOST 1577-2022: Heavy-gauge plates and wide strips of structural quality steel. Technical specifications

GOST 15891-70: Hot-rolled fashioned strip two layered steel for plough-shares. Specifications

GOST 17066-94: Thin sheet rolled stock of high strength steel

GOST 18907-73: Hard-worked heat-treated ground bars from high-alloy and corrosion-resistant steel

GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades

GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications

GOST 19281-2014: High strength rolled steel. General specification

GOST 19281-73: Low alloyed sorted and shaped steel

GOST 19281-89: Rolled steel with increased strength. General specifications

GOST 19442-74: Shaped bars for blades and bars for blade coupling of steam turbines made of corrosion-resistant and high-temperature steel

GOST 20072-74: Heat-resistant steel

GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications

GOST 21729-76: Construction cold-shaped and heat-shaped carbon and alloy steel pipes. Specification.

GOST 2246-70: Welding steel wire. Specifications

GOST 22703-2012: Molded parts of coupler and automatic coupler devices of railway rolling stock. General specifications.

GOST 22703-91: Moulded pieces of automatic coupler equipment for 1520 mm gauge railway rolling stock. General specifications

GOST 23270-89: Tube-billets for machining

GOST 23304-78: Bolts, studs, nuts and washers for flanged connections for atomic power plants. Technical requirements. Acceptance. Test methods. Marking, packing, transportation and storage

GOST 23705-79: Hot-rolled and forged high-temperature alloy bars

GOST 27772-2015: Structural steel structure rolled products. General specifications

GOST 2787-2019: Ferrous metals are secondary. General specifications

GOST 28378-89: Iron-based powder structural materials. Types

GOST 28393-89: PM bars and strips of high-speed steel. General specifications

GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications

GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications

GOST 30803-2014: Transmission tooth gears of the traction railway stock. Specifications

GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST 31622-2012: Wrought stainless steel for surgical implants. Specifications

GOST 31623-2012: XK62M6L alloy cast rods for artificial joints. Specifications

GOST 31624-2012: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST 31625-2012: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST 31825-2012: Sucker rods, mouth stocks and couplings for them. Specifications

GOST 31841-2012: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST 31844-2012: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical equipments

GOST 32400-2013: Molded side frame and bolster beam of вogies for railway freight wagons. Specifications

GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications

GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.

GOST 3269-78: Stationary brake shoe holder for freight wagons of the 1520 mm gauge railways. Specifications

GOST 33228-2015: Steel welded pipes for general purposes. Specifications

GOST 34450-2018: Details and assembly units of coupling and automatic coupling devices of railway rolling stock. Test methods

GOST 34458-2018: Articulated connector devices with cast male and female parts for freight cars of articulated type. General technical specifications

GOST 34636-2020: Pipe billet. General specifications

GOST 4543-2016: Metal products from structural alloy steel. Specification

GOST 4543-71: Structural alloyed steel

GOST 5267.0-90: Hot-rolled sections for car building. General specifications

GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications

GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions

GOST 5521-93: Shipbuilding rolled steel

GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades

GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades

GOST 5781-82: Hot-rolled steel for reinforcement of ferroconcrete structures. Specifications

GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications

GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape

GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications

GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel

GOST 7370-2015: Railway frogs. Specifications

GOST 7370-98: Railroad frogs of P75, P65 and P50 types. Specifications

GOST 7909-56: Drill prospecting pipes and coupling to them

GOST 800-78: Bearing tubes. Technical requirements

GOST 801-2022: Rolled bearing steel. Technical conditions

GOST 801-78: Bearing steel. Specifications

GOST 808-70: Flattened steel strip for spiral rollers of bearings

GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications

GOST 8731-74: Seamless hot-deformed steel pipes. Specifications

GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements

GOST 8803-89: Round finer wire made of precision alloys with high electrical resistivity for resistive elements

GOST 9124-85: Binding tin-coated steel wire

GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications

GOST 977-88: Steel castings. General specifications

GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures

GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure

GOST R 51161-2002: Sucker rods, mouth stocks and couplings for them. Specifications

GOST R 51394-99: Wrought stainless steel for surgical implants. Specifications

GOST R 51395-99: ХК62М6Л alloy cast rods for artificial joints. Specifications

GOST R 51396-99: Special alloy wire for connecting load-bearing and implanted members of products for organism's bones. General specifications

GOST R 51397-99: Special alloy strip and wire for connecting and implanted members of products for cardiovascular surgery. General specifications

GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications

GOST R 52664-2010: Welded pipe sheet piles. Specifications

GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications

GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications

GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications

GOST R 53444-2009: Motor vehicles. Crankshafts of engines. General technical requirements and methods of tests

GOST R 53680-2009: Petroleum and natural gas industries. Well service equipment. General technical requirements

GOST R 53683-2009: Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment. General technical rudiments

GOST R 53808-2010: Automobile engines. Camshafts. Technical requirements and test methods

GOST R 53932-2010: Tube billet. General specifications

GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications

GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications

GOST R 54908-2012: Heat-resistant steel metal products. Specifications

GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications

GOST R 54929-2012: Steel welded pipes for general purposes. Specifications

GOST R 55185-2012: Parts and assembly units of coupler and automatic coupler devices of railway rolling stock. Test methods

GOST R 55260.1.3-2012: Hydro power plants. Part 1-3. Hydroelectric power station hydraulic installations. Concrete construction and reinforced concrete construction. Safety requirements

GOST R 56030-2014: Pipes for details of bearings. Technical specifications

GOST R 56299-2014: Rolled products from bearing steel. Specifications

GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications

GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure

GOST R 57587-2017: Products obtained by additive processes. Methods of control and testing

GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications

GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications

GOST R 70235-2022: Cold-rolled strip of thermo-metals. Technical conditions

GOST R 70731.4-2023: Steel pipes for manufacture of equipment and pipelines of nuclear power plants. General technical conditions. Part 4. Longitudinal welded steel pipes made of 08Х18Н10Т austenitic class steel.

OST 108.004.10-86: Quality control program of nuclear energetics products.

OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)

OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.

OST 108.109.01-92: Basic part billets made of corrosion-resistant steels of austenitic class. Technical conditions.

OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.

OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.

OST 26-01-135-81: Vessels, devices and high-pressure pipeline parts forgings. General technical requirements, acceptance rules, Test methods.

OST 3-98-80: Constructional and spring refining steel. Technical requirements.

OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements

PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels

PNST 595-2022: Oil and gas industry. Underwater production systems. General characteristics and rules of application of structural steels for building structures

RD 24.207.01-90: Piping fittings. Water-flap average life time dependence on specific pressure on the sealing surface

RD RTM 26-362-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of iron and steel

RD RTM 26-363-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of monel-metal alloy

RD RTM 26-364-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of basic elements in ferroalloys

RD RTM 26-365-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Methods of chemical analysis of welding fluxes and electrode coatings

RD RTM 26-366-80: Accelerated and marking methods for chemical and spectral analysis of basic and welding materials in chemical and petroleum engineering. Spectral methods of steel analysis

ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements

ST TsKBA 014-2004: Pipe fittings. Steel castings. General technical conditions

TU 1310-043-38948552-2017: Hot-deformed seamless tubes mechanically machined from corrosion-resistant steel 08X18H10T

TU 14-3-1128-2000: Seamless hot-deformed steel pipes for gas pipelines of gas-lift systems and gas field equipment. Technical conditions

TU 14-3-460:2009: Seamless steel pipes for steam boilers and pipelines. Technical conditions

TU 14-3R-110-2009: Thick-walled hot-deformed pipes made of corrosion-resistant steel. Technical conditions

TU 14-3R-1128-2007: Seamless cold-resistant steel pipes for gas pipelines of gas-lift systems for oil production and gas field equipment. Technical conditions

TU 14-3R-115-2010: Centrifugally cast pipes for the chemical and petrochemical industries. Technical conditions

TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English
Price: $79.00
imgalt
Armour clothes. Classification and general technical requirements
Language: English
Price: $189.00
imgalt
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English
Price: $283.00
imgalt
Food products. Methods for detection and quantity determination of coliformes
Language: English
Price: $169.00
imgalt
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English
Price: $139.00
imgalt
Hotels design
Language: English
Price: $1,698.24
imgalt
Railroad rails. General specifications
Language: English
Price: $1,813.00
imgalt
Potassium chloride
Language: English
Price: $159.00
imgalt
Controllers acting without
Language: English
Price: $151.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!