Alloyed and highalloyed steels. Methods for determination of niobium
Стали легированные и высоколегированные. Методы определения ниобия
Status: Valid - Supersedes
The standard establishes photometric methods for the determination of arsenic.
Стандарт устанавливает фотометрические методы определения ниобия при его массовой доле от 0,002 % до 4,00 % с реагентом сульфонитрофенолом С или сульфохлорфенолом С и от 0,01 % до 8,00 % с реагентом ПАР.
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
The Product is Contained in the Following Classifiers:
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.12 Testing and control of products of metallurgical industry »
4.12.1 Ferrous metals »
ISO classifier »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National standards »
77 METALLURGY »
77.080 Ferrous metals »
77.080.20 Steel »
National Standards for KGS (State Standards Classification) »
Latest edition »
V Metals and metal products »
V3 Steel quality and high quality (quality stock) »
V39 Test methods. Packaging. Marking »
National Standards for OKSTU »
ORE RAW MATERIALS, NONMERAL, SECONDARY FERROUS METALLURGY AND COKE »
Control methods (testing, analysis, measurements) »
As a Replacement Of:
GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium
The Document References:
GOST 10484-78: Reagents. Hydrofluoric acid. Specifications
GOST 10652-73: Reagents. Dihydrate ethylenediaminetetraacetic acid disodium salt. Specifications
GOST 10929-76: Reagents. Hydrogen peroxide. Specifications
GOST 11125-84: Super pure nitric acid. Specifications
GOST 12361-82: Alloyed and high-alloyed steels. Methods for determination of niobium
GOST 14261-77: Hydrochloric acid super pure. Specifications
GOST 14262-78: Super pure sulphuric acid. Specifications
GOST 16099-80: Niobium in ingots. Specifications
GOST 16100-79: Niobium bricks. Technical requirements
GOST 18289-78: Reagents. Sodium tungstate 2-aqueous. Specifications
GOST 28473-90: Iron, steel, ferroalloys, metal chromium and metal manganese. General requirements for methods of analysis
GOST 3118-77: Reagents. Hydrochloric acid. Specifications
GOST 3773-72: Reagents. Ammonium chloride. Specifications
GOST 4166-76: Reagents. Sodium sulphate. Specifications
GOST 4204-77: Reagents. Sulphuric acid. Specifications
GOST 4461-77: Reagents. Nitric acid. Specifications
GOST 5456-79: Reagents. Hydroxilamine hydrochloride. Specifications
GOST 5817-77: Reagents. Tartaric acid. Specifications
GOST 6552-80: Reagents. Orthophosphoric acid. Specifications
GOST 7172-76: Reagents. Potassium pyrosulphate
GOST 7565-81: Iron, steel and alloys. Sampling for determination of chemical composition
The Document is Referenced By:
GOST 10160-75: Magnetically soft precision alloys
GOST 1050-2013: Metal products from nonalloyed structural quality and special steels. General specification
GOST 10543-98: Steel surfacing wire. Specifications
GOST 11474-76: Bent-steel sections. Specifications
GOST 14081-78: Wire of precision alloys with specified temperature coefficient of linear expansion. Specifications
GOST 14082-78: Bars and plates precision alloys with assigned temperature coefficient of linear expansion. Specifications
GOST 14117-85: Strip made from precision alloys for elastic elements
GOST 14118-85: Wire made of precision alloys, designed for elastic elements
GOST 14119-85: Rods from precision alloys for elastic elements
GOST 17066-94: Thin sheet rolled stock of high strength steel
GOST 18143-72: Corrosion resistant
GOST 18968-73: Corrosion-resistant and high temperature steel rods and strips for steam turbine blades
GOST 19277-73: Seamless steel tubes for oil and fuel lines. Specifications
GOST 19281-2014: High strength rolled steel. General specification
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 20072-74: Heat-resistant steel
GOST 2246-70: Welding steel wire. Specifications
GOST 23270-89: Tube-billets for machining
GOST 23705-79: Hot-rolled and forged high-temperature alloy bars
GOST 25054-81: Forgings made of corrosion-resistant steels and alloys
GOST 26131-84: Heat-resisting steel forgings. General specifications
GOST 27772-2015: Structural steel structure rolled products. General specifications
GOST 27772-88: structural steel structure rolled products. General specifications
GOST 2787-2019: Ferrous metals are secondary. General specifications
GOST 30245-2012: Steel bent closed welded square and rectangular section for building. Specifications
GOST 30563-98: Seamless cold-worked carbon and alloy steel tubes for special purposes. Specifications
GOST 31443-2012: Steel pipes for crafts pipelines. Specifications
GOST 31447-2012: Steel weldes pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST 32528-2013: Hot-deformed seamless steel pipes. Specifications
GOST 32678-2014: Pipes steel seamless and welded cold-bent for general purpose. Specifications.
GOST 33228-2015: Steel welded pipes for general purposes. Specifications
GOST 34028-2016: Reinforcing rolled products for reinforced concrete constructions. Specifications
GOST 34468-2018: Pyatniki freight cars of 1520 mm gauge railways. General technical conditions
GOST 34636-2020: Pipe billet. General specifications
GOST 4986-79: Cold-rolled band from corrosion-resistant and heat-resistant steel
GOST 5267.0-90: Hot-rolled sections for car building. General specifications
GOST 550-75: Seamless steel tubes for petroleum processing and petrochemical industry. Specifications
GOST 5520-2017: Rolled plate of unalloyed and alloyed steel for boilers and vessels working under pressure. Technical conditions
GOST 5520-79: Carbon, low-alloy and alloy sheet steel for boilers and pressure vessels. Specifications
GOST 5521-93: Shipbuilding rolled steel
GOST 5582-75: Corrosion-resistant, heat-proof, and heat-resistant thin-sheet rolled stock
GOST 5632-2014: Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 5949-2018: Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
GOST 5949-75: Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
GOST 5950-2000: Tool alloy steel bars, strips and coils. General specifications
GOST 7350-77: Plate, corrosion-resistant, heat-resistant, and high-temperature steel
GOST 8479-70: Structural carbon and alloy steel forgings
GOST 8536-79: Blanks for marine shafts and rudder stocks. Specifications
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 8733-74: Cold-formed and heat-formed seamless steel pipes. Technical requirements
GOST 9466-75: Covered metal electrodes for manual arc welding of steels and deposition. Classification and general specifications
GOST 977-88: Steel castings. General specifications
GOST R 50.04.05-2018: Conformity assessment system for the use of nuclear energy. Conformity assessment in the form of testing. Qualification testing for the steels and alloys melting and casting procedures
GOST R 50.05.17-2019: Conformity assessment system in the field of atomic energy use. Steel castings for equipment and pipelines of nuclear power plants. Control procedure
GOST R 52079-2003: Steel welded pipes for trunk gas pipelines, oil pipelines and oil products pipelines. Specifications
GOST R 52664-2010: Welded pipe sheet piles. Specifications
GOST R 52927-2008: Rolled stock of normal, increased- and high-strength steel for shipbuilding. Specifications
GOST R 52927-2015: Rolled of normal, increased - and high-strength steel for shipbuilding. Specifications
GOST R 53383-2009: Hot-deformed seamless steel pipes. Specifications
GOST R 53580-2009: Steel pipes for crafts pipelines. Specifications
GOST R 53932-2010: Tube billet. General specifications
GOST R 54159-2010: Seamless and welded cold deformed steel pipes for general purposes. Specifications
GOST R 54864-2011: Hot-deformed seamless steel pipes for the welded steel structures. Specifications
GOST R 54908-2012: Heat-resistant steel metal products. Specifications
GOST R 54909-2012: Metal products from alloyed steel and alloys for valves of internal combustion engines. Specifications
GOST R 54929-2012: Steel welded pipes for general purposes. Specifications
GOST R 56299-2014: Rolled products from bearing steel. Specifications
GOST R 56403-2015: Trunk pipelines for oil and oil products transportation. Welded steel pipes. Specifications
GOST R 57180-2016: Welding joints. Methods for determination of mechanical properties, macrostructure and microstructure
GOST R 57587-2017: Products obtained by additive processes. Methods of control and testing
GOST R 57837-2017: Hot-rolled steel I-beams with parallel edges of flanges. Specifications
GOST R 58915-2020: Rolled plates of cryogenic steels. Specifications
ODM 218.2.044-2014: Recommendations for the performance of instrument and instrumental measurements in assessing the technical condition of bridge structures on highways
OST 108.004.10-86: Quality control program of nuclear energetics products.
OST 108.020.03-82: Stamped billets of turbine and compressor blades made of corrosion-resistant and heat-resistant steel. General Specifications. (2010 edition, including 3 amendments)
OST 108.030.124-85: Details and prefabricated units made of pearlitic steels for pipelines with environment pressure P>2.2 MPa (22 kg/cm2) in nuclear power plants. General Specifications.
OST 108.961.04-80: Castings of carbon and alloy steel, nickel-base alloys for components of stationary steam turbines and compressors. Specifications.
OST 24.125.60-89: Details and prefabricated units of steam and hot water in thermal power plants. General Specifications.
OST 95-29-72: Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
OTT 1.5.2.01.999.0157-2013: The supporting structures of the elements of nuclear plants with water-cooled power reactors. General technical requirements
PNST 394-2020: Steel pipes for the manufacture of equipment and pipelines of nuclear plants. General specifications. Part 1. Seamless steel pipes from unalloyed and alloyed steels
ST TsKBA 010-2004: Pipe fittings. Forgings, stampings and rolled products. Technical requirements
TU 14-158-116-99: Steel electric-welded longitudinal pipes of increased corrosion resistance and cold resistance for gas and oil pipelines
TU 14-3R-55-2001: Seamless steel pipes for steam boilers and pipelines
Customers Who Viewed This Item Also Viewed:
Ball valves and disk gate valves. End-to-end (face-to-face) dimensions
Safety valves of stream and hot-water boilers. Technical requirements
Industrial gas burners. General technical requirements
Petroleum and natural gas industries. Shell-and-tube heat eхchangers. Technical requirements
Straight and diamond knurl. Form and basic dimensions
Industrial gas burners. Test methods
Ball, lifting-plug and cylindrical cocks for nominal pressure at most PN 250. General specifications
White sugar. Specifications
Pipeline valves. Methods of control and testing
Stainless steels and corrosion resisting, heat-resisting and creep resisting alloys. Grades
Pipeline valves. Leakage rates of valves
Technical Regulations of the Eurasian Economic Union "On the Safety of Chemical Products"
Graphite electrodes and nipples. Specifications
Welded steel pipes for gas and oil pipelines. Technical specifications
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.