GOST 30869-2003
ГОСТ 30869-2003
|
|
Safety of machinery. Safety requirements for fluid power systems and their components. Pneumatics
Безопасность оборудования. Требования безопасности к гидравлическим и пневматическим системам и их компонентам. Пневматика
Status: Effective - Introduced for the first time
The standard applies to pneumatic systems and their components and establishes safety requirements for the intended use of systems and their components. The standard lists the hazards and factors affecting the safe operation of systems and their components. The standard does not apply to gas cylinders and air tanks. The standard is intended for use in the design, manufacture and modernization of systems and their components, namely with: - assembly; - installation; - adjustment; - operation; - maintenance; - repair. The description of the components in this standard is presented to the extent that the safety requirements ensure their safe use and allow to be included in the design of the system during development.
Стандарт распространяется на пневматические системы и их компоненты и устанавливает требования безопасности при целевом использовании систем и их компонентов. В стандарте перечислены опасности и факторы, влияющие на безопасную эксплуатацию систем и их компонентов. Стандарт не распространяется на газовые баллоны и резервуары с воздухом. Стандарт предназначен для применения при конструировании, изготовлении и модернизации систем и их компонентов, а именно при: - сборке; - монтаже; - наладке; - эксплуатации; - техническом обслуживании; - ремонте. Описание компонентов в настоящем стандарте представлено в том объеме, в котором требования безопасности обеспечивают их безопасное использование и позволяют включить в конструкцию системы при разработке.
Choose Language:
Format: Electronic (pdf/doc)
Approved: State Committee of the Russian Federation for Standardization and Metrology,
12/9/2003
SKU: RUSS62593
The Product is Contained in the Following Classifiers:
Construction (Max) »
Standards »
Other state standards used in construction »
13 Environmental protection, protection of people from environmental exposure. Security »
Construction (Max) »
Standards »
Other state standards used in construction »
23 Hydraulic and pneumatic systems and components for general use. »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
010/2011 TR CU. On safety of machinery and equipment »
Regulations and standards (to ТР ТС ТС 010/2011) »
Evidence base (TR CU, Technical Regulation of the Customs Union) »
038/2016 TR EAEU. About safety of rides »
Regulations and standards (to 038/2016 TR EAEC) »
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
III Occupational safety requirements for production equipment and processes »
2 Safety requirements for certain types of work »
2.2 Operation of production machines and equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.110 Safety of machinery »
ISO classifier »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.100 Volumetric hydraulic actuators and pneumatic actuators »
23.100.01 Volumetric hydraulic actuators and pneumatic actuators in general »
National standards »
23 HYDRAULIC AND PNEUMATIC SYSTEMS AND GENERAL PURPOSE COMPONENTS »
23.100 Volumetric hydraulic actuators and pneumatic actuators »
23.100.01 Volumetric hydraulic actuators and pneumatic actuators in general »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G0 General rules and regulations for engineering »
G07 Safety »
The Document References:
GOST 1.0-92: State System for Standardization of Russian Federation. Basic principles
GOST 1.2-97: Interstate system for standardization. Interstate standards, rules and recommendations on interstate standardization. Procedure for development, taking over application, renovation and cancellation
GOST 12.1.010-76: Explosion safety. General requirements
GOST 12.2.101-84: Pneumatic drives
GOST 12.3.001-85: System of labor safety standards pneumatic drives
GOST 14254-96: Degrees of protection provided by enclosures (IP Code)
GOST 17752-81: Hydraulic and pneumatic drive. Terms and definitions
GOST 2.782-96: Unified system for design documentation. Graphic designations. Hydraulic and pneumatic machines
GOST 2.784-96: Unified system for design documentation. Graphic designations. Pipeline elements
GOST 7.67-94: System of standards on information librarianship and publishing. Codes of names of countries
GOST EN 1050-2002: Safety of machines. The principles of risk assessment and determination
GOST EN 418-2002: Safety of machines. Installation of emergency shut-down. Functions Design Philosophy
GOST ISO/TO 12100-1-2001: Safety of machinery. Basic concepts, general principles for design. Part 1. Basic terms, procedure
GOST ISO/TO 12100-2-2002: Safety of machinery. Basic concepts, general principles for design. Part 2. Technical principles and technical requirements
GOST MEK 60204-1-2002: Safety of machines. Electrical equipment for machined and devices. Part 1. General requirements
GOST R 51336-99: Safety of machinery. Emergency stop equipment. Functional aspects. Principles for design
GOST R 51344-99: Safety of machinery. Principles for risk assessment
GOST R IEC 60204-1-99: Safety of machinery. Electrical equipment of machines. Part 1. General requirements
The Document is Referenced By:
GOST 12.2.019-2005: Occupational safety standards system. Agricultural tractors and self-propelled machines. General safety requirements
GOST 12.2.019-2015: Occupational safety standards system. Tractors and agricultural machinery. General safety requirements
GOST 12.2.121-2013: Occupational safety standards system. Industrial tractors. General safety requirements
GOST 31439-2011: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST 31441.5-2011: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety «c»
GOST 31541-2012: Hammers. Safety requirements
GOST 31542-2012: Automatic and semi-automatic metal forming machines. Safety requirements
GOST 31733-2012: Hydraulic presses. Safety requirements
GOST 33807-2016: Safety of attractions. General requirements
GOST 34595-2019: Mining engineering. Pneumatic impulse cartridges. General technical requirements. Test methods
GOST EN 1034-5-2014: Equipment for the manufacture and finishing of paper. Safety requirements for design and manufacturing. Part 5. Sheet-cutting machinery
GOST EN 1218-1-2013: Safety of woodworking machines. Tenoning machines. Part 1. Single end tenoning machines with sliding table
GOST EN 12415-2006: Safety of metal-working machine tools. Numerically controlled turning machines and turning centres
GOST EN 12417-2006: Safety of metal-working machine tools. Machining centres
GOST EN 12478-2006: Safety of machine tools. Large numerically controlled turning machines and large turning centres
GOST EN 12717-2011: Safety of machine tools. Drilling machines
GOST EN 12840-2011: Safety of machine tools. Manually controlled turning machines with or without automatic control
GOST EN 12957-2011: Safety of metal-working machine tools. Electro-discharge machines
GOST EN 13021-2012: Winter service machines. Safety requirements
GOST EN 13128-2006: Safety of metal-working machine tools. Milling machines (including boring machines)
GOST EN 13218-2011: Safety of machine-tools. Stationary grinding machines
GOST EN 13898-2011: Safety of machine tools. Sawing machines for metal cold cutting
GOST EN 1760-1-2004: Safety of machinery. Pressure sensitive protective devices. Part 1. General principles for the design and testing of pressure sensitive mats and pressure sensitive floors
GOST ISO 12643-5-2017: Graphic technology. Safety requirements for graphic technology equipment and systems. Part 5. Stand-alone platen presses
GOST R 51343-99: Safety of machinery. Prevention of unexpected start-up
GOST R 52869-2007: Pneumatic drives. Safety requirements
GOST R 53010-2008: Hydraulic presses. Safety requirements
GOST R 53130-2008: Safety of attractions. General requirements
GOST R 54317-2011: Launching and technical complexes of space-rocket complexes. Safety requirements
GOST R 54431-2011: Metal-working machines. General safety requirements
GOST R 55158-2012: Mining equipment. Haulage and shunting mining winches. General technical requirements and test methods
GOST R 55161-2012: Mining equipment. Borers mining hand pneumatic. Safety requirements and methods of testing
GOST R 58870-2020: Mining equipment. Monorail suspended roads for mine transport. Safety requirements
GOST R 60.1.2.2-2016: Robots and robotic devices. Safety requirements for industrial robots. Part 2. Robot systems and integration
GOST R EN 1010-5-2012: Printing machinery. Safety requirements for design and construction. Part 5. Machines for the production of corrugated board and machines for the conversion of flat and corrugated cardboard
GOST R EN 1034-1-2012: Paper-making and finishing machines. Safety requirements for the design and construction. Part 1. General requirements
GOST R EN 12717-2006: Safety of machine tools. Drilling machines
GOST R EN 12750-2012: Safety of woodworking machines. Four sided planning (longitudinal and milling) machines
GOST R EN 12840-2006: Safety of machine-tools. Manually controlled turning machines with or without automatic control
GOST R EN 12957-2007: Safety of metal-working machine tools. Electrodisharge machines
GOST R EN 13218-2006: Safety of machine-tools. Stationary grinding machines
GOST R EN 13463-5-2009: Non-electrical equipment for potentially explosive atmospheres. Part 5. Protection by constructional safety “c”
GOST R EN 13788-2007: Safety of metal-working machine tools. Multi-spindle automatic turning machines
GOST R EN 13898-2009: Machine tools. Safety. Sawing machines for metal cold cutting
GOST R EN 1710-2009: Equipment and components intended for use in potentially explosive atmospheres in underground mines
GOST R EN 1870-1-2011: Safety of woodworking machines. Circular sawing machines. Part 1. Circular multipurpose saw benches (with and without sliding table), circular dimension saw and circular building site saws
GOST R EN 848-1-2011: Safety of woodworking machines. One side milling machines. Part 1. Single spindle milling machines with vertical lower arrangement of spindle
GOST R EN 859-2010: Safety of woodworking machines. Hand fed surface planning machines
GOST R EN 860-2010: Safety of woodworking machines. Outside thickness planning machines
GOST R EN 861-2011: Safety of woodworking machines. Surface planning and thickening machines
GOST R EN 940-2009: Safety of woodworking machines. Combined woodworking machines
GOST R ISO 13849-1-2003: Safety of machinery. Safety-related parts of control systems. Part 1. General principles for design
GOST R ISO 16156-2008: Machine-tools safety. Jaw chucks
GOST R ISO 23125-2012: Safety of machine tools. Turning machines
GOST R ISO 4254-1-2011: Agricultural machinery. Safety requirements. Part 1. General requirements
RD RosJeK 10-KM-03: Rules for the design, construction and manufacture of hoisting cranes
RD RosJeK 10-KR-01: Rules for the design, construction and manufacture of hoisting cranes
RD RosJeK 10-PV-02: Rules for the design, construction and manufacture of hoists (towers)
STB 1568-2005: Occupational safety standards system. Printing equipment. Safety requirements and test methods
STB EN 12855-2008: Equipment for foodstuffs processing. Cutters with rotating bowl. Safety and Health Requirements
STB EN 13019-2006: Machines for cleaning of road surfaces. Safety requirements
STB EN 13021-2006: Machines for winter maintenance of roads. Safety requirements
STB EN 13524-2007: Machines for road maintenance. Safety requirements
STB EN 1870-10-2007: Safety of woodworking machines. Radial saw machines. Part 10. Automatic and semiautomatic rising blade machines
STB EN 1870-11-2007: Safety of woodworking machines. Radial saw machines. Part 11. Automatic and semiautomatic horizontal cross-cutting rising blade machines, (radial arm-sawing machines)
STB EN 1870-12-2007: Safety of woodworking machines. Radial saw machines. Part 12. Pendulum cross-cutting rising blade machines
STB EN 1870-15-2007: Safety of woodworking machines. Radial saw machines. Part 15. Multi blade cross-cutting machines with motorized and manual loading and/or unloading
STB EN 1870-16-2007: Safety of woodworking machines. Radial saw machines. Part 16. Bilateral miter machines for V-shaped cutting
STB EN 1870-2-2006: Safety of woodworking machines. Circular sawing machines. Part 2. Horizontal and vertical machines for slabs cutting
STB EN 1870-3-2006: Safety of woodworking machines. Circular sawing machines. Part 3. Machines for cutoff turning from above and machines of combined types
STB EN 1870-7-2006: Safety of woodworking machines. Circular sawing machines. Part 7. Bolter machines with mechanical delivery of motorized table with manual loading and/ or unloading
STB EN 1870-8-2006: Safety of woodworking machines. Circular sawing machines. Part 8. Edging and deal-frame machines with motorized sawing unit and with manual loading and/ or unloading
STB EN 1870-9-2007: Safety of woodworking machines. Circular sawing machines. Part 9. Bilateral mitering machines with mechanical delivery and with manual loading and/ or unloading
|
Customers Who Viewed This Item Also Viewed:
 |
Controllers acting without
Language: English |
Building materials. Methods for combustibility test
Language: English |
Building materials spread flame test method
Language: English |
Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V. Non-sheathed cables for fixed wiring
Language: English |
Clear sheet glass. Specifications
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Steel welded vessels and apparatus. General technical conditions
Language: English |
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
