imgalt

GOST 7076-99

ГОСТ 7076-99

Building materials and products. Method of determination of steady-state thermal conductivity and thermal resistance

Материалы и изделия строительные. Метод определения теплопроводности и термического сопротивления при стационарном тепловом режиме

Status: Valid - Supersedes

The standard applies to building materials and products, as well as materials and products intended for thermal insulation of industrial equipment and pipelines, and establishes a method for determining their effective thermal conductivity and thermal resistance at an average sample temperature from minus 40 to 200 degrees Celsius.

Стандарт распространяется на строительные материалы и изделия, а также на материалы и изделия, предназначенные для тепловой изоляции промышленного оборудования и трубопроводов, и устанавливает метод определения их эффективной теплопроводности и термического сопротивления при средней температуре образца от минус 40 до +200 градусов по Цельсию.

Choose Language: 
Format: Electronic (pdf/doc)

Approved: Gosstroy of Russia, 12/24/1999

SKU: RUSS62728

Price: $462.00



imgalt

The Product is Contained in the Following Classifiers:

Construction (Max) » Regulations » Documents System of normative documents in construction » 6. Regulatory documents for building materials and products » K.64 Heat-insulating, sound-insulating and sound-absorbing materials »

Construction (Max) » Standards » Other state standards used in construction » 27 Power and heat engineering »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 2 Tests for external factors » 2.3 Testing of products in construction »

PromExpert » SECTION I. TECHNICAL REGULATION » V Testing and control » 4 Testing and control of products » 4.1 Testing and control of products of mining and non-metallic industry » 4.1.2 Non-metallic minerals, materials and products »

ISO classifier » 27 ENERGY AND HEATING TECHNOLOGY » 27.220 Heat recovery. Thermal insulation »

National standards » 27 ENERGY AND HEATING TECHNOLOGY » 27.220 Heat recovery. Thermal insulation »

ISO classifier » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.01 Building materials in general »

National standards » 91 CONSTRUCTION MATERIALS AND CONSTRUCTION » 91.100 Building Materials » 91.100.01 Building materials in general »

National Standards for KGS (State Standards Classification) » Latest edition » Zh Construction and building materials » Zh1 Construction materials » Zh19 Test methods. Packaging. Marking »

National Standards for OKSTU » CONSTRUCTION MATERIALS, EXCEPT REFINED CONCRETE STRUCTURES AND PARTS » Control methods (testing, analysis, measurements) »


As a Replacement Of:

GOST 7076-87: Building materials and products. Method of thermal conductivity determination

The Document References:

GOST 166-89: Vernier callipers. Specifications

GOST 17177-94: Thermal insulating materials and products for building application. Test methods.

GOST 24104-88: General purpose and reference laboratory balances

GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications

GOST 7076-87: Building materials and products. Method of thermal conductivity determination

The Document is Referenced By:

GOST 10140-2003: Thermal insulating mineral wool slabs on bituminous binder. Specifications

GOST 10140-80: Thermal insulating mineral wool slabs on bituminous binder. Specifications

GOST 10633-2018: Wood chipboards and fibreboards. General rules for the preparation and conduct of physical and mechanical tests

GOST 10832-2009: Perlite expanded sand and crushed stone. Specifications

GOST 10832-91: Expanded pearlite sand and crushed stone. Specifications

GOST 11024-2012: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 11024-84: Concrete and reinforced concrete panels for external walls of residential and civil buildings. General specifications

GOST 11118-2009: Autoclaved aerated concrete panels for external walls of buildings. Specifications

GOST 11368-89: Wood moulding compounds. Specifications

GOST 12.4.076-90: Occupational safety standards system. Materials for special leather shoes. Quality characteristics nomenclature

GOST 13015-2003: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13015-2012: Concrete and reinforced concrete products for construction. General technical requirements. Rules for acceptance, marking, transportation and storage

GOST 13578-2019: Lightweight concrete panels on porous aggregates for the exterior walls of industrial buildings. General specifications

GOST 15588-2014: Polystyrene insulating slabs. Specifications

GOST 15588-86: Polystyrene foam boards. Specifications

GOST 16136-2003: Thermal insulating Perlite bitumen slabs. Specifications

GOST 16136-80: Thermal insulating Perlite bitumen slabs. Specifications

GOST 19222-2019: Arbolit and products from it. General specifications

GOST 20916-87: Foam plastic heat-insulating slabs based on resol phenol-formaldehyde resins. Specifications

GOST 21562-76: Metal-faced building panels with foam plastic thermal insulation. General specifications

GOST 21880-2011: Thermoinsulating mineral wool broached mats. Specifications

GOST 21880-2022: Mats of mineral wool heat insulation. Technical conditions

GOST 21880-94: Thermo insulating mineral wool broached mats. Specifications

GOST 22031-76: Heat insulating products for refrigerators. Specifications

GOST 22263-76: Crushed stone and sand of porous rocks. Technical requirements

GOST 22950-95: Mineral wool slabs of higher rigidity on synthetic bond. Specifications

GOST 23208-2003: Thermoinsulating cylinders and semicylinders of mineral wool on synthetic binder. Specifications

GOST 23208-2022: Cylinders and semi-cylinders for thermal insulation of mineral wool on a synthetic binder. Technical conditions

GOST 23307-78: Thermoinsulating mineral wool vertically-layered mats. Specifications

GOST 24748-2003: Heat insulation lime-siliceous products. Specifications

GOST 24748-81: Heat insulation lime-siliceous products. Specification

GOST 25380-2014: Buildings and structures. Method of measuring density of heat flows passing through enclosing structures

GOST 25380-82: Buildings and structures. Method of measuring density of heat flows passing through enclosure structures

GOST 25485-2019: Cellular concrete. General specifications

GOST 25485-89: Cellular concretes. Specifications

GOST 25820-2000: Lightweight aggregates concretes. Specifications

GOST 25820-2014: Lightweight aggregates concretes. Specifications

GOST 26816-2016: Cement-bonded wood boards. Specifications

GOST 2694-78: Foamed diatomite and diatomite thermo insulating products. Technical requirements

GOST 30732-2001: Steel shaped pipes and products with foamed polyurethane thermal insulation in polyethylene jacket. Technical specifications

GOST 30732-2006: Steel pipes and shaped products with foamed polyurethane thermal insulation in protective sheath. Specifications.

GOST 30971-2002: Erection to joints of window assemblies adjoined to wall openings. General specifications

GOST 30971-2012: Erection to joints of window assemblies adjoined to wall openings. General specifications

GOST 31309-2005: Building heat-insulating mineral fibers materials. General specifications

GOST 31310-2005: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 31310-2015: Wall three-layer reinforced concrete panels with energy-efficient insulation. General specifications

GOST 31357-2007: Dry bulding cement binder mixes. General specifications

GOST 31359-2007: Cellular autoclave curing concretes. Specifications

GOST 31360-2007: Wall unreinforced products of cellular autoclave curing concrete. Specifications

GOST 31912-2011: Thermal insulating products for building equipment and industrial installations. Determination of design thermal conductivity

GOST 31915-2011: Thermal insulating products. Evaluation of conformity

GOST 31937-2011: Buildings and constructions. Rules of inspection and of the technical condition

GOST 32158-2013: Plywood with outer layers of miter splicing veneer for use in construction specifications

GOST 32310-2012: Factory made termal insulation products of extruded polystyrene foam (XPS) for building. Specifications

GOST 32313-2011: Thermal insulating mineral wool products for building equipment and industrial installations. General specifications

GOST 32314-2012: Factory made mineral wool products used for thermal insulation of buildings. General specifications

GOST 32488-2013: Exterior wall panels of claydite-concrete for residential and public buildings. Specificatiоns

GOST 32494-2013: Buildings and constructions. The method of mathematic simulation for temperature and humidity of protecting constructions

GOST 32494-2021: Buildings and structures. The method of mathematical modeling of the temperature-humidity regime of enclosing structures

GOST 32496-2013: Fillers porous for light concrete. Specifications

GOST 32497-2013: Porous aggregate for thermal insulation buildings and facilities. Specifications

GOST 32603-2012: Three-layered metal panels with mineral wool insulation. Specifications

GOST 32614-2012: Gypsum plasterboards buildings. Specifications

GOST 33065-2014: Plywood for truck, car, container building. Specifications

GOST 33083-2014: Dry building plaster cement binder mixes. Specifications

GOST 33126-2014: Expanded clay concrete blocs. Specifications

GOST 33928-2016: Artificial porous fillers based on ashes and slags of thermal power plants. Specification

GOST 33929-2016: Concrete with polysterene aggregates. Specifications

GOST 33949-2016: Products from foam glass heat-insulating for buildings and structures. Specification

GOST 34374.2-2017: Plastics Determination of thermal conductivity and thermal diffusivity. Part 2. Method using a flat heat source (heated disc) in a variable mode

GOST 34379-2018: Translucent enclosing structures. Rules of inspection of technical conditions under natural conditions

GOST 34826-2022: Trunk pipeline transport of oil and petroleum products. Linear part. Organization and production of construction and installation works

GOST 3916.1-2018: Plywood for general use with outer layers of deciduous veneer. Specifications

GOST 3916.1-96: Plywood with external layers of deciduous veneer for general use

GOST 3916.2-2018: Plywood for general use with outer layers of coniferous veneer. Specifications

GOST 3916.2-96: General purpose plywood with coniferous veneer

GOST 4598-2018: Fibre boards by wet way of production. Specifications

GOST 4640-2011: Mineral wool. Specifications

GOST 9573-2012: Thermal insulating plates of mineral wool on synthetic binder. Specifications

GOST 9573-96: Thermal insulating plates of mineral wool on synthetic binder. Specifications

GOST 9758-2012: Porous inorganic aggregates for construction work. Test methods

GOST 9758-86: Non-organic porous aggregates for construction work

GOST R 51263-2012: Concrete with polystyrene aggregates. Specifications

GOST R 51263-99: Concrete with polysterene aggregates. Specifications

GOST R 51829-2022: Gypsum fiberboard sheets and products based on them. Technical specifications

GOST R 51882-2002: Heat-insulating radioactivity resistant products for atomic power stations. General technical requirements

GOST R 52749-2007: Assembly window joints with vapour-permeable and self-expanding tapes. Specifications

GOST R 53338-2009: Vapour-permeable self-expanding and self-adhesive tapes for building application. Specifications

GOST R 53778-2010: Buildings and constructions. Rules of inspection and monitoring of the technical condition. General requirements

GOST R 54850-2011: Roof windows and skylights. Method for determination of reduced of thermal resistance

GOST R 54853-2011: Bulidings and structures. Method for determination of thermal resistance and thermal coefficient of enclosing structures with assistance of heat flow meter

GOST R 54854-2011: Light-weight concretes on phytogenesis organic aggregates. Specifications

GOST R 54855-2011: Building materials and products. Method for determining design thermal value

GOST R 54858-2011: Translucent facade construction. Method for determination of thermal transmission resistance

GOST R 54923-2012: Polymer composite wall ties for multilayer envelope buildings. Specifications

GOST R 55338-2012: Masonry and masonry products. Methods for determining estimates of the thermal protection

GOST R 56148-2014: Thermal insulating products of expanded polystyrene (EPS) for building applications. Specifications

GOST R 56227-2014: Pipes and shaped products steel in polymer-mineral foam isolation. Specifications

GOST R 56506-2015: Coarse-pored claydite-concrete heat insulating tiles. Specifications

GOST R 56507-2015: Aggregates thermolit of siliceous raw materials. Specifications

GOST R 56589-2015: Claydite-concrete heating main chutes. Specifications

GOST R 56590-2015: Factory made rigid polyurethane foam products used for thermal insulation of buildings. General specifications

GOST R 56590-2016: Polyisocyanurate foam based thermal and sound insulation slabs. Specification

GOST R 56591-2015: Expanded claydite-plaster blocks. Specifications

GOST R 56686-2015: Dry construction plaster mixes based on cement binder with use of ceramsite sand. Specifications

GOST R 56729-2015: Thermal insulating factory made polyethylene foam products for engineering equipment of buildings and industrial installations. General specifications

GOST R 57385-2017: Trunk pipeline transport of oil and oil products. Construction of oil and oil products trunk pipelines. Thermal insulation of pipes and fittings

GOST R 57418-2017: Mineral wool heat-insulatingmaterials and products. Method of determining the effective operation period

GOST R 57796-2017: Dry building mixes on cement binder with use of ceramsite sand for mortars. Specifications

GOST R 57910-2017: Materials for additive process. Control and tests methods

GOST R 58029-2017: Design and manufacture of site built, vertical, cylindrical, flatbottomed steel tanks for the storage of refrigerated, liquefied gases with operating temperatures between 0 °C and to-165 °C. Insulation components

GOST R 58272-2018: Dry building masonry mixes. Technical conditions

GOST R 58324-2018: Suspended ceilings. General technical conditions

GOST R 58895-2020: Concrete is chemically resistant. Specifications

GOST R 58950-2020: Fencing structures of buildings. Method for determining the effective service life of polymer thermal insulation

GOST R 59687-2022: Metal panels with foam insulation. General technical specifications

GOST R 59688-2022: Two-layer steel panels for building coverings with polyurethane foam insulation. Technical conditions

GOST R 59689-2022: Three-layer chrysotile cement panels with foam insulation. General technical conditions

GOST R 59985-2022: Building envelope structures. Methods for determining the thermal performance of insulating materials and products under operating conditions

GOST R 70222-2022: Heavy concretes. Technical conditions

GOST R 70522-2022: Cellular concrete small wall blocks. Technical specifications

GOST R 70723-2023: Window and door units. Calorimetric method for determining the heat transfer coefficient

ODM 218.2.061-2015: Recommendations for determining the thermophysical properties of road-building materials and soils

OSN-APK 2.10.03.001-04: Designing the integrated protection of reinforced concrete structures of industrial agricultural buildings and structures from the effects of corrosive environments

PNST 61-2015: Foamed concrete thermo insulating blocks based on nanostructured binder. Specifications

RD 34.26.203: Guidelines for Brick Lining Work During Installation of Boiler Plants and Energy Facilities

RD 34.26.601: Guidelines for Repair of Brickwork of Steam Boilers at Electric Power Generating Stations

RD EO 0007-93: Standard instruction manual for operation of industrial buildings and structures of nuclear power plants. Part 1. Organization of operation, repairs and maintenance. Volume 1, 2

RD EO 0586-2004: Nuclear power plants equipment and pipelines thermal insulation. Design standards

Recommendations: Aspiration smoke-sensitive alarms VESDA. Part 1. Scope

Resolution 1062-PP: Energy efficiency of residential and public buildings. Standards for energy consumption and thermal protection

Resolution 2425: On approval of the single list of products subject to mandatory certification and the single list of products subject to declaration of conformity, amending the decree of the Government of the Russian Federation of December 31, 2020 N 2467 and repealing certain acts of the Government of the Russian Federation

RMD 51-25-2018 St. Petersburg: Recommendations for the design, installation and operation of facade systems for new construction, reconstruction and repair of residential and public buildings in St. Petersburg. Part II Recommendations for the operation and repair of facade systems for new construction and reconstruction of residential and public buildings in St. Petersburg

RMD 52-01-2006 Sankt-Peterburg: Design and construction of enclosing structures of residential and public buildings using cellular concrete in St. Petersburg. Part I

SDA 24-2008: Rules for assessment (certification) of testing laboratories personnel

SP 130.13330.2018: Production of prefabricated reinforced concrete structures and products

SP 23-101-2000: Design of thermal performance of buildings

SP 23-101-2004: Design of thermal protection of buildings

SP 293.1325800.2017: Facade's thermo insulation composite systems with external mortar layers. Design and work execution rules

SP 345.1325800.2017: Residential and public buildings. Thermal performance design

SP 384.1325800.2018: Tent structures. Design rules

SP 409.1325800.2018: Pipelines trunk and field for oil and gas. Work on the installation of thermal and anticorrosive insulation, monitoring of work

SP 431.1325800.2019: Industrial automobile roads. Rules for design and construction in the Arctic zone

SP 61.13330.2012: Designing of thermal insulation of equipment and pipe lines

SP 70.13330.2012: Bearing and enclosing structures. Updated living edition of SNiP 3.03.01-87

TR 12274-TI.2004: Thermal insulation products "Isover" of the grades KK-ALS, KT-11-TWIN, KIM-AL, KVM-50, KLS-K in the designs of thermal insulation of equipment and pipelines. Recommendations for use with technical solutions album

TR 149/2-05: Technical recommendations on the technology of using a complex of finishing materials for major repairs, rehabilitation and reconstruction of building facades

TR 165-05: Technical recommendations on the establishment of durability (service life) of building materials and products

TSN 23-305-99: Energy efficiency in residential and public buildings. Standards for thermal protection of buildings. Saratov region

TSN 23-307-00: Energy efficiency in residential and public buildings. Standards for thermal protection of buildings. Ivanovo region

TSN 23-310-2000: Energy efficiency in residential and public buildings. Standards for thermal protection of buildings. Belgorod region

TSN 23-310-2016 BelO: Energy efficiency in residential and public buildings. Design and control standards

TSN 23-311-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Smolensk region

TSN 23-312-2000: Thermal protection of residential and public buildings. Thermal Protection Standards. Vladimir region

TSN 23-313-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Tyumen region

TSN 23-314-2000: Standards (standards) for energy-saving thermal protection of residential and public buildings. Kaliningrad region

TSN 23-317-2000 NSO: Energy saving in residential and public buildings. Standards for heat consumption and heat protection. Novosibirsk region

TSN 23-318-2000: Thermal protection of buildings. Republic of Bashkortostan

TSN 23-319-2000 Krasnodar region: Energy efficiency in residential and public buildings. The norms for thermal performance of the buildings

TSN 23-320-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Chelyabinsk region

TSN 23-321-2000: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Astrakhan region

TSN 23-322-2001: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Kostroma region

TSN 23-323-2001: Energy efficiency of residential and public buildings. Standards for thermal protection of buildings. Khanty-Mansi Autonomous Area

TSN 23-324-2001: Energy-saving thermal protection of residential and public buildings. Komi Republic

TSN 23-325-2001: Energy efficiency of residential and public buildings. Energy-saving thermal protection of buildings. Design Standards. Altai region

TSN 23-326-2001: Energy efficiency of residential and public buildings. Guidelines for energy-efficient thermal protection of buildings. Republic of Kalmykia

TSN 23-327-2001: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Bryansk region

TSN 23-328-2001: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Amur region

TSN 23-331-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Chita region

TSN 23-332-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Penza region

TSN 23-333-2002: Energy consumption and thermal protection of residential and public buildings. Nenets Autonomous Okrug

TSN 23-334-2002: Energy efficiency of residential and public buildings. Standards for energy-saving heat protection. Yamal-Nenets Autonomous Okrug

TSN 23-335-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Ulyanovsk region

TSN 23-336-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kemerovo region

TSN 23-338-2002: Energy saving in civil buildings. Standards for heat consumption and heat protection. Omsk region

TSN 23-339-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Rostov region

TSN 23-340-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. St. Petersburg

TSN 23-341-2002: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Ryazan Oblast

TSN 23-343-2002: Heat protection and energy consumption of residential and public buildings. The Republic of Sakha (Yakutia)

TSN 23-344-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Altai Republic

TSN 23-345-2003: Energy saving in buildings. Standards for thermal protection and heat and electricity supply of residential and public buildings. Udmurtia

TSN 23-348-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Pskov region

TSN 23-349-2003: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Samara Region

TSN 23-350-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Vologodskaya Oblast

TSN 23-355-2004: Energy efficiency of residential and public buildings. Standards for energy consumption and heat protection. Kirov region

TU 1390-007-32256008-05: External heat-insulating coating of pipes and fittings with a diameter of 57 ... 720 mm

TU 2244-001-42809359-02: Extruded polystyrene foam plates "Styrofoam". Technical conditions

TU 2244-069-04696843-00: Energofleks. Foam Polyethylene Products. Technical Specifications

TU 36-16-22-10-89: Roll Mineral Wool Mats on Synthetic Binder

TU 36-16-22-14-88: Structures Made from Mineral Wool Products with Corrugated Structure for Industrial Thermal Insulation

TU 36-16-22-33-89: Heat-insulating cords

TU 5284-002-20582582-02: Three-layer metal panels with polyurethane foam insulation for enclosing structures. Technical conditions

TU 5768-001-27519262-97: Steel Pipes with Foam Polyurethane Thermal Insulating Layer with Waterproof Coating

TU 5768-001-55258056-04: Thermal insulation products from elastomeric materials based on foamed synthetic rubbers

TU 5768-002-27519262-97: Shells Made from Foam Polyurethane with Thermal Insulating Layer for Insulation of Joints of Steel Pipes

TU 5768-003-27519262-97: Shaped Products with Foam Polyurethane Thermal Insulating Layer and Waterproof Coating

TU 5768-005-47114136-02: Steel pipes insulated with polyurethane foam in a polyethylene protective sheath for oil and gas pipelines

TU 5768-006-38969258-06: Compactor polyurethane "GerPhen PM" for construction purposes

TU 5768-008-04002154-00: Steel Pipes with Foam Polyurethane Insulation and Waterproof Coating. Technical Specifications

TU 5768-009-86695843-2011: Steel pipes with thermal insulation made of polyurethane foam in a protective sheath for oil and gas pipelines

TU 5775-004-3896258-06: Self-expanding vapor-permeable tape "GerPhen PSUL" for construction purposes

VSN 462-85: Use of Cast Polyurethane Foam for Thermal Insulation of Piping and Equipment

VSN 68-97: Guidelines for Thermal Insulation of Joints Around Window and Door Assemblies in Exterior Wall Panels of Residential and Public Occupancies by Spray Application of Single-Component Foam Polyurethane System "Vilan-405

Customers Who Viewed This Item Also Viewed:

imgalt imgalt
Building materials. Methods for combustibility test
Language: English
Price: $162.00
imgalt
Cylindrical evolvent gears of external engagment. Strength calculation
Language: English
Price: $745.00
imgalt
Building materials spread flame test method
Language: English
Price: $147.00
imgalt
Food products, food raw materials. Method for determination of the non-steroidal anti-inflammatory drug residue content by high performance liquid chromatography – mass spectrometry
Language: English
Price: $349.00
imgalt
Steel welded vessels and apparatus. General technical conditions
Language: English
Price: $549.00
imgalt
Plywood for general use with outer layers of deciduous veneer. Specifications
Language: English
Price: $414.00
imgalt
System of Standards for Occupational Safety and Health (SSBT). Personal protective equipment for respiratory organs. Self-rescuers insulating on chemically bound or with compressed oxygen. Technical requirements. Test methods. Marking. Sampling rules
Language: English
Price: $700.00
imgalt

YOUR ORDERING MADE EASY!

RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.

Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.

We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.

Placing Your Order

Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).

Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.

For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.

For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.

Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.

Your Order Best Quality and Authenticity Guarantee

Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).

We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.

We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.

All Codes and Regulations

All Categories

Send us a message Expand Collapse

Leave your message in the form below, and we will write back by e-mail!