GOST R 50399-92
ГОСТ Р 50399-92
|
|
Air-foam nozzles. Specifications
Стволы воздушно-пенные. Технические условия
Status: Not effective - Superseded. IUS 2-2010
The standard applies to air-foamy trunks designed to obtain low-and medium-frequency air-mechanical foam from a foaming agent solution in fresh water, forming and directing its jet to the fire. The standard does not apply to air-foam trunks designed to work on sea water.
Стандарт распространяется на воздушно-пенные стволы, предназначенные для получения воздушно-механической пены низкой и средней кратности из раствора пенообразователя в пресной воде, формирования и направления ее струи на очаг пожара. Стандарт не распространяется на воздушно-пенные стволы, предназначенные для работы на морской воде.
Choose Language:
Format: Electronic (pdf/doc)
Approved: Gosstandart of Russia,
11/20/1992
SKU: RUSS62851
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION III. LABOR PROTECTION AND SAFETY »
IV Fire safety »
3 Fire safety equipment »
ISO classifier »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National standards »
13 ENVIRONMENTAL PROTECTION, HUMAN PROTECTION AGAINST ENVIRONMENTAL IMPACT. SECURITY »
13.220 Fire protection »
13.220.10 Fire fighting »
National Standards for KGS (State Standards Classification) »
Latest edition »
G Machines, equipment and tools »
G8 Machinery and equipment of universal application »
G88 Fire fighting vehicles, equipment and inventory »
National Standards for OKSTU »
CONSTRUCTION, ROAD AND UTILITY ENGINEERING PRODUCTS »
Fire fighting equipment »
The Document is Replaced With:
GOST R 53251-2009: Fire-fighting equipment. Hand foam-nozzles. General technical requirements. Methods of testing
As a Replacement Of:
GOST 11101-73: Air-foam nozzle. Specifications
The Document References:
GOST 10144-89: Enamels XB-124Specifications
GOST 10354-82: Polyethylene film Specifications
GOST 11101-73: Air-foam nozzle. Specifications
GOST 12.2.037-78: Fire engineering. Safety requirements
GOST 13837-79: General purpose dynamometers
GOST 14192-96: Cargo marking
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 15152-69: Unified system of corrosion and ageing protection. Industrial rubber products for tropics. General requirements
GOST 15598-70: Piano steel wire
GOST 1583-89: Aluminium casting alloys. Specifications
GOST 1583-93: Aluminium casting alloys. Specifications
GOST 16093-2004: Basic norms of interchangeability. Metric screw thread. Tolerances. Clearance fits
GOST 16093-81: Basic norms of interchangebility. Metric screw thread. Tolerances. Clearance fits
GOST 16272-79: Technical plasticized polyvinylchloride film. Specifications
GOST 166-89: Vernier callipers. Specifications
GOST 17756-72: Threaded plug-gauges with inserts with full-form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17757-72: Threaded plug-gauges with inserts with incomplete form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17763-72: Threaded plug-gauges with full form of thread of diameters from 1 to 100 mm. Design and basic dimensions
GOST 17764-72: Threaded ring-gauges with incomplete form of thread of diameters from 2 to 100 mm. Design and basic dimensions
GOST 18925-73: Screw plug-gauges with full form gaging members for pipe cylindrical threads from 1 3/4 'up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 18926-73: Screw plug-gauges with truncated form gaging members for pipe cylindrical thread from 1 3/4'up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 18929-73: Full form screw ring-gauges for pipe cylindrical threads from 1/16' up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 18930-73: Truncated form screw ring-gauges for pipe cylindrical threads from 1/16' up to 3 3/4' nominal diameter. Construction and basic sizes
GOST 19537-83: Gun grease. Specifications
GOST 2.601-2006: Unified system for design documentation. Exploitative documents
GOST 2.601-95: Operational documents
GOST 24634-81: Wooden boxes for export products. General specifications
GOST 24705-2004: Вasic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 24705-81: Basic norms of interchangeability. Metric screw thread. Basic dimensions
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 2789-73: Surface roughness. Parameters and characteristics
GOST 28352-89: Couplings for fire-fighting equipment Types, general parameters and dimensions
GOST 29329-92: Balance for static weightings
GOST 2991-85: Wooden uncollapsible cases for weights up to 500 kg. General specifications
GOST 3826-82: Wire cloth nets with square mesh. Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 4366-76: Grease synthetic solidol. Specifications
GOST 515-77: Bitumized and tarred packaging paper
GOST 5632-72: High-alloy steels and corrosion-proof, heat-resisting and heat treated alloys. Grades
GOST 6267-74: Grease ЦИАТИМ-201. Specifications
GOST 6357-81: Basic norms of interchangeability pipe cylindrical thread
GOST 6465-76: Enamels PF-115. Specifications
GOST 6557-89: Rubber rings for connection fitting. Specifications
GOST 6613-86: Square meshed woven wire gauzes
GOST 8828-89: Base paper and two-layer waterproof packaging paper
GOST 9.014-78: Unified system of corrosion and ageing protection. Temporary corrosion protection of products. General requirements
GOST 9.032-74: Unified, system of corrosion and ageing protection. Paint coatings. Groups, technical requirements and designations
GOST 9.301-86: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. General requirements
GOST 9.302-88: Unified system of corrosion and ageing protection. Metal and non-metal inorganic coatings. Control methods
GOST 9569-79: Paraffin paper
RD 50-204-87: Procedural Guidelines. Equipment Reliability. Gathering and Processing Data on In-Service Reliability of Articles. Basic Provisions
RD 50-690-89: Methodological instructions. Industrial product dependability. Methods for estimating dependability based on experimental data.
TU 6-10-1301-83: HV-16 and HV-16R enamels of various colors
|
Customers Who Viewed This Item Also Viewed:
 |
Industrial process measurement and control equipment. Reliability. General requirements and test methods
Language: English |
Gauged corrosion-resistant, heat-resistant and high-temperature steel shape
Language: English |
System for ensuring the reliability and safety of construction sites. Loads and impacts. design standards
Language: English |
Heating, ventilation and air conditioning. Fire Safety Requirements
Language: English |
Reliability of atomic power stations and their equipment. General statements and reliability index nomenclature
Language: English |
Electromagnetic compatibility of technical equipment. Technical equipment for nuclear power plants. Requirement and test methods
Language: English |
Billets made of corrosion-resistant steels of 12Х18Н9Т, 12Х18Н10Т, 08Х18Н10Т, 10Х17Н13М2Т, 12Х18Н12Т and 03Х21Н32М3Б types.
Language: English |
Dependability in technics. Terms and definitions
Language: English |
System of products development and launching into manufacture. Technical assignment. Requirements to contents and form of presentation
Language: English |
Reliability in technology. Composition and general rules for setting reliability requirements
Language: English |
Rails of types P38 and P42. Technical conditions
Language: English |
Stainless corrosion resisting, heat-resisting and creep resisting steel and alloy on iron-nickel-based products. Specifications
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.