GOST R 51191-2007
ГОСТ Р 51191-2007
|
|
Units of lower-limb prostheses. Technical requirements and test methods
Узлы протезов нижних конечностей. Технические требования и методы испытаний
Status: Effective
This standard applies to nodes of lower limb prostheses intended for a person weighing from 60 to 125 kg, at any level of amputation and with congenital underdevelopment of the lower limbs by type of stump. The standard does not apply to the nodes of children's and special prostheses (sports, workers, training)
Настоящий стандарт распространяется на узлы протезов нижних конечностей, предназначенные для человека массой от 60 до 125 кг, при любом уровне ампутации и при врожденном недоразвитии нижних конечностей по типу культи. Стандарт не распространяется на узлы детских и специальных протезов (спортивных, рабочих, учебно-тренировочных)
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2007
SKU: RUSS62878
The Product is Contained in the Following Classifiers:
PromExpert »
SECTION I. TECHNICAL REGULATION »
V Testing and control »
4 Testing and control of products »
4.13 Testing and control of products of engineering industry »
4.13.2 Machines and equipment for special purposes »
4.13.2.11 Equipment and instruments for medical industry »
ISO classifier »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
11.180.10 Aids and mobility aids »
National standards »
11 HEALTH »
11.180 Aids for persons with physical disabilities and injuries »
11.180.10 Aids and mobility aids »
National Standards for KGS (State Standards Classification) »
Latest edition »
R Health. Sanitation and hygiene items »
R2 Equipment and tools of medical institutions »
R23 Instruments, apparatus, accessories and equipment used in traumatology and orthopedics. Prostheses »
The Document is Replaced With:
GOST R 51191-2019: Nodes of prostheses of the lower extremities. Technical requirements and test methods
As a Replacement Of:
GOST R 51191-98: Units of lower-limb prostheses. General technical requirements
The Document References:
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 166-89: Vernier callipers. Specifications
GOST 27.410-87: Industrial product dependability. Inspection methods of reliability indices and plans of check tests on reliability
GOST 29329-92: Balance for static weightings
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 5378-88: Vernier protractors. Specifications
GOST 7502-98: Measuring metal tapes. Specifications
GOST R 50444-92: Medical instruments, apparatus and equipment. General specifications
GOST R 51632-2000: Technical aids for disabled persons. General technical requirements and test methods
GOST R 51819-2001: Prosthetics and orthotics of upper-limb and lower-limb components. Terms and definitions
GOST R ISO 10328-2007: Prosthetics. Structural testing of lower-limb prostheses. Requirements and test methods
GOST R ISO 10993.10-99: Medical devices. Biological evaluation of medical devices. Part 10. Tests for irritation and sensitization
GOST R ISO 10993.1-99: Medical devices. Biological evaluation of medical devices. Part 1. Evaluation and testing
GOST R ISO 10993.5-99: Medical devices. Biological evaluation of medical devices. Part 5. Tests for cytotoxicity: in vitro methods
GOST R ISO 13405-1-2001: Prosthetics and orthotics. Classification and description of prosthetic components. Part 1. Classification of prosthetic components
GOST R ISO 13405-2-2001: Prosthetics and orthotics. Classification and description of prosthetic components. Part 2. Description of lower-limb prosthetic components
GOST R ISO 15032-2001: Prostheses. Structural testing of hip units
GOST R ISO 22523-2007: External limb prostheses and external orthoses. Requirements and test methods
The Document is Referenced By:
GOST R 51632-2014: Technical aids for disabled persons. General technical requirements and test methods
GOST R 53868-2010: Units of lower-limb prostheses for children. Technical requirements and test methods
GOST R 53869-2010: Prostheses of lower-limb. Technical requirements
GOST R 53871-2010: Methods of evaluation of rehabilitation efficiency of lower-limb prosthetics
GOST R 57771-2017: Electronic units of the prostheses of the upper and lower limb. Technical requirements
GOST R 58447-2019: Lower limb prostheses with an external energy source. General technical requirements
|
Customers Who Viewed This Item Also Viewed:
 |
Liquid lubricating and plastic materials. Method of test for lubricating properties on four ball machine
Language: English |
Armour clothes. Classification and general technical requirements
Language: English |
Food products. Methods for detection and quantity determination of coliformes
Language: English |
Natural gas. Methods of calculation of physical properties. Calculation of physical properties on base information on density of standards conditions and nitrogen and carbon dioxide contents
Language: English |
Hotels design
Language: English |
Railroad rails. General specifications
Language: English |
Potassium chloride
Language: English |
Controllers acting without
Language: English |
 |
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.
