GOST R 52664-2006
ГОСТ Р 52664-2006
|
|
Welded pipe sheet piles. General specifications
Шпунт трубчатый сварной. Технические условия
Status: Not effective - Superseded
This standard applies to tubular welded sheet piling profiles made at metal construction factories and intended for use in piling walls of capital and temporary structures for various purposes, built in all climatic areas of construction.
Настоящий стандарт распространяется на профили шпунта трубчатого сварного, изготовленные на заводах металлических конструкций и предназначенные для применения в конструкциях шпунтовых стен капитальных и временных сооружений различного назначения, возводимых во всех климатических районах строительства
Choose Language:
Format: Electronic (pdf/doc)
Approved: Federal Agency for Technical Regulation and Metrology,
12/27/2006
SKU: RUSS62985
The Product is Contained in the Following Classifiers:
Construction (Max) »
Regulations »
Documents System of normative documents in construction »
5. Regulatory documents for building structures and products »
K.53 Metal structures »
Welding regulations »
Welding work »
Welding regulations »
Main materials »
Welding regulations »
Pipelines »
Welding regulations »
Welding materials »
Welding regulations »
Welding staff »
Welding regulations »
Documentation »
Welding regulations »
Non-destructive control »
Welding regulations »
Defects »
Welding regulations »
Welding work »
Dusting »
Welding regulations »
Main materials »
Steel, cast iron »
Welding regulations »
Welding materials »
Electrodes »
Welding regulations »
Welding materials »
Fluxes »
Welding regulations »
Welding materials »
Gases »
ISO classifier »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National standards »
91 CONSTRUCTION MATERIALS AND CONSTRUCTION »
91.080 Structures of buildings »
91.080.10 Metal constructions »
National Standards for KGS (State Standards Classification) »
Latest edition »
Zh Construction and building materials »
Zh3 Building structures and parts »
Zh34 Metal structures and parts »
The Document is Replaced With:
GOST R 52664-2010: Welded pipe sheet piles. Specifications
The Document References:
GOST 5264-80: Manual arc welding. Welding joints. Main types, design elements and dimensions
Federal Law 184-FZ: About technical regulation
GOST 10704-91: Electrically welded steel line-weld lubes. Range
GOST 10705-80: Electrically welded steel tubes. Specifications
GOST 10706-76: Electrically welded steel line-weld tubes. Technical requirements
GOST 14771-76: Gas-shielded arc welding. Welded joints. Main types, design elements and dimensions
GOST 15150-69: Machines, instruments and other industrial products. Modifications for different climatic regions. Categories, operating, storage and transportation conditions as to environment climatic aspects influence
GOST 16037-80: Welded joints in steel pipelines. Main types, design elements and dimensions
GOST 19281-89: Rolled steel with increased strength. General specifications
GOST 20295-85: Welded steel pipes for gas and oil pipelines. Technical specifications
GOST 2246-70: Welding steel wire. Specifications
GOST 23118-99: Steel construction structures
General Technical Specifications
GOST 427-75: Measuring metal rules. Basic parameters and dimensions. Specifications
GOST 535-2005: Common quality carbon steel bar and shaped sections. General specifications
GOST 535-88: Common quality carbon bar and shaped sections. General specifications
GOST 6996-66: Welded joints. Methods of mechanical properties determination
GOST 7502-98: Measuring metal tapes. Specifications
GOST 8050-85: Carbon dioxide,
GOST 8713-79: Flux welding. Welded joints. Maih types design elements and dimensions
GOST 8731-74: Seamless hot-deformed steel pipes. Specifications
GOST 9.402-2004: Unified system of corrosion and ageing protection. Paint coatings. Metal surface preparation for painting
GOST 9087-81: Welding melted fluxes
GOST 9467-75: Metal covered electrodes for manual arc welding of structural and heat-resistant steels. Types
GOST R 1.0-2004: Standardization in the Russian Federation. Basic provisions
SP 53-101-98: Manufacturing and quality control of steel structures for construction
Customers Who Viewed This Item Also Viewed:
|
Limit dimension deviation from 0,1 to 10000 mm and surface shape and arrangement allowances, not specified on drawings.
Language: English |
Rules of development, coordination, approval and composition of technical and economic assessment for construction
Language: English |
Mineral fertilizers. Method for determination of dynamic strength and attrition
Language: English |
Diesel fuel EURO. Specifications
Language: English |
Inch thread with a profile angle of 55 degrees
Language: English |
Vessels and apparatus. Norms and methods of strength calculation. General requirements
Language: English |
Norms of structural design of nuclear power plants with reactors of different types
Language: English |
|
|
YOUR ORDERING MADE EASY!
RussianGost.com is an industry-leading company with stringent quality control standards and our dedication to precision, reliability and accuracy are some of the reasons why some of the world’s largest companies trust us to provide their national regulatory framework and for translations of critical, challenging, and sensitive information.
Our niche specialty is the localization of national regulatory databases involving: technical norms, standards, and regulations; government laws, codes, and resolutions; as well as RF agency codes, requirements, and Instructions.
We maintain a database of over 220,000 normative documents in English and other languages for the following 12 countries: Armenia, Azerbaijan, Belarus, Kazakhstan, Kyrgyzstan, Moldova, Mongolia, Russia, Tajikistan, Turkmenistan, Ukraine, and Uzbekistan.
Placing Your Order
Please select your chosen document, proceed to the ‘checkout page’ and select the form of payment of your choice. We accept all major credit cards and bank wire transfers. We also accept PayPal and Google Checkout for your convenience. Please contact us for any additional arrangements (Contract agreements, PO, etc.).
Once an order is placed it will be verified and processed within a few hours up to a rare maximum of 24 hours.
For items in stock, the document/web link is e-mailed to you so that you can download and save it for your records.
For items out of stock (third party supply) you will be notified as to which items will require additional time to fulfil. We normally supply such items in less than three days.
Once an order is placed you will receive a receipt/invoice that can be filed for reporting and accounting purposes. This receipt can be easily saved and printed for your records.
Your Order Best Quality and Authenticity Guarantee
Your order is provided in electronic format (usually an Adobe Acrobat or MS Word).
We always guarantee the best quality for all of our products. If for any reason whatsoever you are not satisfied, we can conduct a completely FREE revision and edit of products you have purchased. Additionally we provide FREE regulatory updates if, for instance, the document has a newer version at the date of purchase.
We guarantee authenticity. Each document in English is verified against the original and official version. We only use official regulatory sources to make sure you have the most recent version of the document, all from reliable official sources.